Package: xserver-xorg-video-radeon Version: 1:7.2.0-1+b2 Severity: normal Usertags: conffile User: debian...@lists.debian.org Usertags: obsolete-conffile adequate
Dear Maintainer, The recent upgrade did not deal with obsolete conffiles properly. Please use the dpkg-maintscript-helper support provided by dh_installdeb to remove these obsolete conffiles on upgrade. http://www.debian.org/doc/debian-policy/ch-files.html#s-config-files http://manpages.debian.net/man/1/dh_installdeb $ pkg=xserver-xorg-video-radeon ; adequate $pkg ; dpkg-query -W -f='${Conffiles}\n' $pkg | grep obsolete xserver-xorg-video-radeon: obsolete-conffile /etc/modprobe.d/radeon-kms.conf /etc/modprobe.d/radeon-kms.conf 3792130931629c4398df31ffa5dd0d9c obsolete The bug is modelled on Paul Wise's bug #726082 . Please lemme know if any more info. is needed. This is on relatively a newish install (only couple of months old.) -- Package-specific info: X server symlink status: ------------------------ lrwxrwxrwx 1 root root 13 Jul 25 22:46 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 2285840 Oct 5 19:37 /usr/bin/Xorg VGA-compatible devices on PCI bus: ---------------------------------- 00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 10) /etc/X11/xorg.conf does not exist. Contents of /etc/X11/xorg.conf.d: --------------------------------- total 4 -rw-r--r-- 1 root root 97 Aug 29 04:54 20-intel.conf KMS configuration files: ------------------------ /etc/modprobe.d/radeon-kms.conf: options radeon modeset=1 Kernel version (/proc/version): ------------------------------- Linux version 3.10-3-amd64 (debian-ker...@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-7) ) #1 SMP Debian 3.10.11-1 (2013-09-10) Xorg X server log files on system: ---------------------------------- -rw-r--r-- 1 root root 23526 Oct 13 00:26 /var/log/Xorg.0.log Contents of most recent Xorg X server log file (/var/log/Xorg.0.log): --------------------------------------------------------------------- [ 100.170] X.Org X Server 1.14.3 Release Date: 2013-09-12 [ 100.170] X Protocol Version 11, Revision 0 [ 100.170] Build Operating System: Linux 3.10-2-amd64 x86_64 Debian [ 100.170] Current Operating System: Linux debian 3.10-3-amd64 #1 SMP Debian 3.10.11-1 (2013-09-10) x86_64 [ 100.171] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10-3-amd64 root=UUID=87d82d2b-dc1a-4f01-8ba4-c68290598b23 ro ipv6.disable=1 quiet [ 100.171] Build Date: 22 September 2013 02:44:54PM [ 100.171] xorg-server 2:1.14.3-3 (Julien Cristau <jcris...@debian.org>) [ 100.171] Current version of pixman: 0.30.2 [ 100.171] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 100.171] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 100.171] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 8 10:31:02 2013 [ 100.186] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 100.186] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 100.227] (==) No Layout section. Using the first Screen section. [ 100.227] (==) No screen section available. Using defaults. [ 100.227] (**) |-->Screen "Default Screen Section" (0) [ 100.227] (**) | |-->Monitor "<default monitor>" [ 100.228] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 100.228] (**) | |-->Device "Intel Graphics" [ 100.228] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 100.228] (==) Automatically adding devices [ 100.228] (==) Automatically enabling devices [ 100.228] (==) Automatically adding GPU devices [ 100.258] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 100.258] Entry deleted from font path. [ 100.321] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 100.321] Entry deleted from font path. [ 100.321] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 100.321] (==) ModulePath set to "/usr/lib/xorg/modules" [ 100.321] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 100.321] (II) Loader magic: 0x7fa43c62fd00 [ 100.321] (II) Module ABI versions: [ 100.321] X.Org ANSI C Emulation: 0.4 [ 100.321] X.Org Video Driver: 14.1 [ 100.321] X.Org XInput driver : 19.1 [ 100.321] X.Org Server Extension : 7.0 [ 100.322] (II) xfree86: Adding drm device (/dev/dri/card0) [ 100.323] (--) PCI:*(0:0:2:0) 8086:29c2:1043:82b0 rev 16, Mem @ 0xfea80000/524288, 0xe0000000/268435456, 0xfe900000/1048576, I/O @ 0x0000dc00/8 [ 100.323] (II) Open ACPI successful (/var/run/acpid.socket) [ 100.323] Initializing built-in extension Generic Event Extension [ 100.323] Initializing built-in extension SHAPE [ 100.323] Initializing built-in extension MIT-SHM [ 100.323] Initializing built-in extension XInputExtension [ 100.323] Initializing built-in extension XTEST [ 100.323] Initializing built-in extension BIG-REQUESTS [ 100.323] Initializing built-in extension SYNC [ 100.323] Initializing built-in extension XKEYBOARD [ 100.323] Initializing built-in extension XC-MISC [ 100.323] Initializing built-in extension SECURITY [ 100.323] Initializing built-in extension XINERAMA [ 100.323] Initializing built-in extension XFIXES [ 100.323] Initializing built-in extension RENDER [ 100.323] Initializing built-in extension RANDR [ 100.323] Initializing built-in extension COMPOSITE [ 100.323] Initializing built-in extension DAMAGE [ 100.323] Initializing built-in extension MIT-SCREEN-SAVER [ 100.323] Initializing built-in extension DOUBLE-BUFFER [ 100.323] Initializing built-in extension RECORD [ 100.323] Initializing built-in extension DPMS [ 100.323] Initializing built-in extension X-Resource [ 100.323] Initializing built-in extension XVideo [ 100.323] Initializing built-in extension XVideo-MotionCompensation [ 100.323] Initializing built-in extension SELinux [ 100.323] Initializing built-in extension XFree86-VidModeExtension [ 100.323] Initializing built-in extension XFree86-DGA [ 100.323] Initializing built-in extension XFree86-DRI [ 100.323] Initializing built-in extension DRI2 [ 100.323] (II) LoadModule: "glx" [ 100.325] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 100.347] (II) Module glx: vendor="X.Org Foundation" [ 100.347] compiled for 1.14.3, module version = 1.0.0 [ 100.347] ABI class: X.Org Server Extension, version 7.0 [ 100.347] (==) AIGLX enabled [ 100.347] Loading extension GLX [ 100.347] (II) LoadModule: "intel" [ 100.362] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 100.393] (II) Module intel: vendor="X.Org Foundation" [ 100.394] compiled for 1.14.3, module version = 2.21.15 [ 100.394] Module class: X.Org Video Driver [ 100.394] ABI class: X.Org Video Driver, version 14.1 [ 100.394] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics, HD Graphics 2000, HD Graphics 3000, HD Graphics 2500, HD Graphics 4000, HD Graphics P4000, HD Graphics 4600, HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100, HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200 [ 100.395] (++) using VT number 7 [ 100.423] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.21.15-1+b2 (amd64 Build Daemon (binet) <buildd-bi...@buildd.debian.org>) [ 100.442] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 100.442] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 100.442] (==) intel(0): RGB weight 888 [ 100.442] (==) intel(0): Default visual is TrueColor [ 100.442] (**) intel(0): Option "AccelMethod" "sna" [ 100.442] (--) intel(0): Integrated Graphics Chipset: Intel(R) G33 [ 100.442] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3 [ 100.442] (**) intel(0): Framebuffer tiled [ 100.442] (**) intel(0): Pixmaps tiled [ 100.442] (**) intel(0): "Tear free" disabled [ 100.442] (**) intel(0): Forcing per-crtc-pixmaps? no [ 100.442] (II) intel(0): Output VGA1 has no monitor section [ 100.442] (--) intel(0): Output VGA1 using initial mode 1600x900 on pipe 0 [ 100.443] (==) intel(0): DPI set to (96, 96) [ 100.443] (II) Loading sub module "dri2" [ 100.443] (II) LoadModule: "dri2" [ 100.443] (II) Module "dri2" already built-in [ 100.443] (==) Depth 24 pixmap format is 32 bpp [ 100.450] (II) intel(0): SNA initialized with Alviso (gen3) backend [ 100.450] (==) intel(0): Backing store disabled [ 100.450] (==) intel(0): Silken mouse enabled [ 100.450] (II) intel(0): HW Cursor enabled [ 100.450] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 100.451] (==) intel(0): DPMS enabled [ 100.459] (II) intel(0): [XvMC] i915_xvmc driver initialized. [ 100.459] (II) intel(0): [DRI2] Setup complete [ 100.459] (II) intel(0): [DRI2] DRI driver: i915 [ 100.459] (II) intel(0): direct rendering: DRI2 Enabled [ 100.459] (==) intel(0): hotplug detection: "enabled" [ 100.459] (--) RandR disabled [ 100.474] (II) SELinux: Disabled on system [ 100.631] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 100.631] (II) AIGLX: enabled GLX_INTEL_swap_event [ 100.631] (II) AIGLX: enabled GLX_ARB_create_context [ 100.631] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 100.631] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 100.631] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 100.631] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 100.632] (II) AIGLX: Loaded and initialized i915 [ 100.632] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 100.641] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [ 100.652] (II) intel(0): Setting screen physical size to 423 x 238 [ 101.168] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 101.168] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 101.168] (II) LoadModule: "evdev" [ 101.168] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 101.196] (II) Module evdev: vendor="X.Org Foundation" [ 101.196] compiled for 1.14.3, module version = 2.8.1 [ 101.196] Module class: X.Org XInput Driver [ 101.196] ABI class: X.Org XInput driver, version 19.1 [ 101.196] (II) Using input driver 'evdev' for 'Power Button' [ 101.196] (**) Power Button: always reports core events [ 101.196] (**) evdev: Power Button: Device: "/dev/input/event2" [ 101.196] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 101.196] (--) evdev: Power Button: Found keys [ 101.196] (II) evdev: Power Button: Configuring as keyboard [ 101.196] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 101.196] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 101.196] (**) Option "xkb_rules" "evdev" [ 101.196] (**) Option "xkb_model" "pc105" [ 101.196] (**) Option "xkb_layout" "us" [ 101.196] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 101.196] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 101.196] (II) Using input driver 'evdev' for 'Power Button' [ 101.196] (**) Power Button: always reports core events [ 101.196] (**) evdev: Power Button: Device: "/dev/input/event1" [ 101.196] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 101.196] (--) evdev: Power Button: Found keys [ 101.196] (II) evdev: Power Button: Configuring as keyboard [ 101.196] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1" [ 101.196] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 101.196] (**) Option "xkb_rules" "evdev" [ 101.196] (**) Option "xkb_model" "pc105" [ 101.196] (**) Option "xkb_layout" "us" [ 101.197] (II) config/udev: Adding drm device (/dev/dri/card0) [ 101.197] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event4) [ 101.197] (II) No input driver specified, ignoring this device. [ 101.197] (II) This device may have been added with another device file. [ 101.197] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event5) [ 101.197] (II) No input driver specified, ignoring this device. [ 101.197] (II) This device may have been added with another device file. [ 101.197] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event6) [ 101.197] (II) No input driver specified, ignoring this device. [ 101.197] (II) This device may have been added with another device file. [ 101.198] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event7) [ 101.198] (II) No input driver specified, ignoring this device. [ 101.198] (II) This device may have been added with another device file. [ 101.198] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event8) [ 101.198] (II) No input driver specified, ignoring this device. [ 101.198] (II) This device may have been added with another device file. [ 101.198] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 101.198] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 101.198] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 101.198] (**) AT Translated Set 2 keyboard: always reports core events [ 101.198] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 101.198] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 101.198] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 101.198] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 101.198] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 101.198] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8) [ 101.198] (**) Option "xkb_rules" "evdev" [ 101.198] (**) Option "xkb_model" "pc105" [ 101.198] (**) Option "xkb_layout" "us" [ 101.199] (II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse (/dev/input/event9) [ 101.199] (**) ImExPS/2 Logitech Explorer Mouse: Applying InputClass "evdev pointer catchall" [ 101.199] (II) Using input driver 'evdev' for 'ImExPS/2 Logitech Explorer Mouse' [ 101.199] (**) ImExPS/2 Logitech Explorer Mouse: always reports core events [ 101.199] (**) evdev: ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event9" [ 101.199] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Vendor 0x2 Product 0x6 [ 101.199] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found 9 mouse buttons [ 101.199] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s) [ 101.199] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found relative axes [ 101.199] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes [ 101.199] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Configuring as mouse [ 101.199] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Adding scrollwheel support [ 101.199] (**) evdev: ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5 [ 101.199] (**) evdev: ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 101.199] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9" [ 101.199] (II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE, id 9) [ 101.199] (II) evdev: ImExPS/2 Logitech Explorer Mouse: initialized for relative axes. [ 101.199] (**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1 [ 101.199] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration profile 0 [ 101.199] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration factor: 2.000 [ 101.199] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration threshold: 4 [ 101.199] (II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse (/dev/input/mouse0) [ 101.199] (II) No input driver specified, ignoring this device. [ 101.199] (II) This device may have been added with another device file. [ 101.200] (II) config/udev: Adding input device PC Speaker (/dev/input/event3) [ 101.200] (II) No input driver specified, ignoring this device. [ 101.200] (II) This device may have been added with another device file. [ 101.304] (II) intel(0): EDID vendor "VSC", prod id 27686 [ 101.304] (II) intel(0): Using EDID range info for horizontal sync [ 101.304] (II) intel(0): Using EDID range info for vertical refresh [ 101.304] (II) intel(0): Printing DDC gathered Modelines: [ 101.304] (II) intel(0): Modeline "1600x900"x0.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz eP) [ 101.304] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 101.304] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 101.304] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 101.304] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 101.304] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 101.304] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 101.304] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 101.304] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 101.304] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 101.304] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 101.304] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 101.304] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 101.304] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 101.304] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 101.304] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 101.304] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 101.304] (II) intel(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e) [ 101.304] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 101.304] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e) [ 15196.299] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [ 32217.719] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [ 38674.536] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [ 42395.943] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [ 50370.870] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [ 55187.724] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [ 59376.507] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [ 73264.954] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [ 77074.512] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [ 78755.280] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [ 86150.351] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [ 99233.664] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [101543.441] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [108160.499] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [114099.913] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [125671.427] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [128843.122] (II) AIGLX: Suspending AIGLX clients for VT switch [128888.901] (II) Open ACPI successful (/var/run/acpid.socket) [128890.063] (II) AIGLX: Resuming AIGLX clients after VT switch [128890.210] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [128899.213] [mi] Increasing EQ size to 512 to prevent dropped events. [128902.868] (II) AIGLX: Suspending AIGLX clients for VT switch [128931.375] (II) Open ACPI successful (/var/run/acpid.socket) [128931.509] (II) AIGLX: Resuming AIGLX clients after VT switch [128931.611] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [130524.484] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [132788.448] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [135430.355] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [146621.432] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [152254.034] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [154972.943] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [164000.735] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [165538.623] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [168902.777] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [174796.978] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [175995.915] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [193432.398] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [199122.093] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [202416.229] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [205137.650] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [207133.372] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [215200.992] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [217794.002] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [219731.835] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [221576.433] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [284953.502] (II) intel(0): switch to mode 640x480@72.8 on pipe 0 using VGA1, position (0, 0), rotation normal [284953.592] (II) intel(0): switch to mode 640x480@72.8 on pipe 0 using VGA1, position (0, 0), rotation normal [284956.666] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [285225.532] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [285225.533] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal [395801.821] (II) AIGLX: Suspending AIGLX clients for VT switch [395850.743] (II) Open ACPI successful (/var/run/acpid.socket) [395850.743] (II) AIGLX: Resuming AIGLX clients after VT switch [395850.797] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal udev information: ----------------- P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 E: EV=3 E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: KEY=10000000000000 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="LNXPWRBN/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=88100 P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2 N: input/event2 E: BACKSPACE=guess E: DEVNAME=/dev/input/event2 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2 E: DMI_VENDOR=System manufacturer E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: MAJOR=13 E: MINOR=66 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=19422 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 E: EV=3 E: ID_FOR_SEAT=input-acpi-PNP0C0C_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: KEY=10000000000000 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="PNP0C0C/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=87597 P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1 N: input/event1 E: BACKSPACE=guess E: DEVNAME=/dev/input/event1 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1 E: DMI_VENDOR=System manufacturer E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: MAJOR=13 E: MINOR=65 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=19054 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input4 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2, E: NAME="HDA Intel Front Headphone" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=4 E: TAGS=:seat: E: USEC_INITIALIZED=85746 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input4/event4 N: input/event4 E: DEVNAME=/dev/input/event4 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input4/event4 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=68 E: SUBSYSTEM=input E: USEC_INITIALIZED=85794 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input5 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6, E: NAME="HDA Intel Line Out" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=40 E: TAGS=:seat: E: USEC_INITIALIZED=85826 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input5/event5 N: input/event5 E: DEVNAME=/dev/input/event5 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input5/event5 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=69 E: SUBSYSTEM=input E: USEC_INITIALIZED=85863 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input6 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfwD, E: NAME="HDA Intel Line" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=2000 E: TAGS=:seat: E: USEC_INITIALIZED=85897 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input6/event6 N: input/event6 E: DEVNAME=/dev/input/event6 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input6/event6 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=70 E: SUBSYSTEM=input E: USEC_INITIALIZED=85934 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input7 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4, E: NAME="HDA Intel Front Mic" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=10 E: TAGS=:seat: E: USEC_INITIALIZED=85968 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input7/event7 N: input/event7 E: DEVNAME=/dev/input/event7 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input7/event7 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=71 E: SUBSYSTEM=input E: USEC_INITIALIZED=86002 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input8 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4, E: NAME="HDA Intel Rear Mic" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=10 E: TAGS=:seat: E: USEC_INITIALIZED=86038 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input8/event8 N: input/event8 E: DEVNAME=/dev/input/event8 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input8/event8 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=72 E: SUBSYSTEM=input E: USEC_INITIALIZED=86073 P: /devices/platform/i8042/serio0/input/input0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0 E: EV=120013 E: ID_FOR_SEAT=input-platform-i8042-serio-0 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe E: LED=7 E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw E: MSC=10 E: NAME="AT Translated Set 2 keyboard" E: PHYS="isa0060/serio0/input0" E: PRODUCT=11/1/1/ab41 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=54504 P: /devices/platform/i8042/serio0/input/input0/event0 N: input/event0 S: input/by-path/platform-i8042-serio-0-event-kbd E: BACKSPACE=guess E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd E: DEVNAME=/dev/input/event0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0 E: DMI_VENDOR=System manufacturer E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=64 E: SUBSYSTEM=input E: USEC_INITIALIZED=18641 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/platform/i8042/serio1/input/input9 E: DEVPATH=/devices/platform/i8042/serio1/input/input9 E: EV=7 E: ID_FOR_SEAT=input-platform-i8042-serio-1 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_PATH=platform-i8042-serio-1 E: ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: KEY=1f0000 0 0 0 0 E: MODALIAS=input:b0011v0002p0006e006A-e0,1,2,k110,111,112,113,114,r0,1,6,8,amlsfw E: NAME="ImExPS/2 Logitech Explorer Mouse" E: PHYS="isa0060/serio1/input0" E: PRODUCT=11/2/6/6a E: PROP=0 E: REL=143 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=24159 P: /devices/platform/i8042/serio1/input/input9/event9 N: input/event9 S: input/by-path/platform-i8042-serio-1-event-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse E: DEVNAME=/dev/input/event9 E: DEVPATH=/devices/platform/i8042/serio1/input/input9/event9 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_PATH=platform-i8042-serio-1 E: ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=73 E: SUBSYSTEM=input E: USEC_INITIALIZED=24304 P: /devices/platform/i8042/serio1/input/input9/mouse0 N: input/mouse0 S: input/by-path/platform-i8042-serio-1-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse E: DEVNAME=/dev/input/mouse0 E: DEVPATH=/devices/platform/i8042/serio1/input/input9/mouse0 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_PATH=platform-i8042-serio-1 E: ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=32 E: SUBSYSTEM=input E: USEC_INITIALIZED=24286 P: /devices/platform/pcspkr/input/input3 E: DEVPATH=/devices/platform/pcspkr/input/input3 E: EV=40001 E: ID_FOR_SEAT=input-platform-pcspkr E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw E: NAME="PC Speaker" E: PHYS="isa0061/input0" E: PRODUCT=10/1f/1/100 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=28242 P: /devices/platform/pcspkr/input/input3/event3 N: input/event3 S: input/by-path/platform-pcspkr-event-spkr E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr E: DEVNAME=/dev/input/event3 E: DEVPATH=/devices/platform/pcspkr/input/input3/event3 E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=67 E: SUBSYSTEM=input E: USEC_INITIALIZED=28662 DRM Information from dmesg: --------------------------- -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (600, 'testing'), (1, 'experimental'), (1, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.10-3-amd64 (SMP w/2 CPU cores) Locale: LANG=en_IN, LC_CTYPE=en_IN (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xserver-xorg-video-radeon depends on: ii libc6 2.17-93 ii libdrm-radeon1 2.4.46-3 ii libpciaccess0 0.13.2-1 ii libudev1 204-5 ii xserver-xorg-core [xorg-video-abi-14] 2:1.14.3-4 xserver-xorg-video-radeon recommends no packages. Versions of packages xserver-xorg-video-radeon suggests: pn firmware-linux <none> -- no debconf information -- Regards, Shirish Agarwal शिरीष अग्रवाल My quotes in this email licensed under CC 3.0 http://creativecommons.org/licenses/by-nc/3.0/ http://flossexperiences.wordpress.com 065C 6D79 A68C E7EA 52B3 8D70 950D 53FB 729A 8B17 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
