Package: src:linux
Version: 3.9.8-1
Followup-For: Bug #625211
Dear Maintainer,
there still problems related to backlight. At first I could not control it at
all. Then, following forums and wikis on the net i tries to pass the
acpi_backlight=vendor parameter to the kernel, and know it work... a little
bit.
What works is that all methods, the keyboard special keys, xbacklight, gnome-
control-center, all udpate the same file, in my case
/sys/class/backlight/samsung/brightness.
But. First that file is reset to the maximum value at every restart. I worked
around this by echoing something into it in /etc/rc.local.
Second, and worst, when I change the file value at runtime (by any of the above
methods), the value is applied... sometimes. I mean, I keep changing the value
and once in while the brightness changes, after 2, 5, 10 seconds, and I have to
be lucky that it happens at the right brightness. If you just change the value
without keeping trying, the value is not usually applied.
Regards, Carlo.
-- Package-specific info:
** Version:
Linux version 3.9-1-amd64 (debian-ker...@lists.debian.org) (gcc version 4.7.3
(Debian 4.7.3-5) ) #1 SMP Debian 3.9.8-1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.9-1-amd64
root=UUID=221d4a92-44de-42bf-a8c4-1d8844595fbf ro acpi_backlight=vendor
acpi_backlight=vendor
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 6.554681] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.554754] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.554841] usb usb2: Product: EHCI Host Controller
[ 6.554910] usb usb2: Manufacturer: Linux 3.9-1-amd64 ehci_hcd
[ 6.554991] usb usb2: SerialNumber: 0000:00:1d.0
[ 6.558299] hub 2-0:1.0: USB hub found
[ 6.558449] hub 2-0:1.0: 2 ports detected
[ 6.588429] psmouse serio1: elantech: assuming hardware version 2 (with
firmware version 0x040215)
[ 6.621518] psmouse serio1: elantech: Synaptics capabilities query result
0x08, 0x14, 0x0c.
[ 6.748522] input: ETPS/2 Elantech Touchpad as
/devices/platform/i8042/serio1/input/input9
[ 6.767036] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 6.857614] input: HD-Audio Generic HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 6.899408] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 6.899482] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.899814] hub 1-1:1.0: USB hub found
[ 6.900046] hub 1-1:1.0: 6 ports detected
[ 7.011108] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 7.048680] <6>[fglrx] Maximum main memory to use for locked dma buffers:
3657 MBytes.
[ 7.048952] <6>[fglrx] vendor: 1002 device: 68e0 count: 1
[ 7.049270] <6>[fglrx] ioport: bar 4, base 0xd000, size: 0x100
[ 7.049521] <6>[fglrx] Kernel PAT support is enabled
[ 7.049610] <6>[fglrx] module loaded - fglrx 13.20.4 [Jul 26 2013] with 1
minors
[ 7.143519] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 7.143606] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.144143] hub 2-1:1.0: USB hub found
[ 7.144325] hub 2-1:1.0: 8 ports detected
[ 7.215283] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 7.330145] usb 1-1.1: New USB device found, idVendor=1210, idProduct=25f4
[ 7.330230] usb 1-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 7.330325] usb 1-1.1: Product: USB 2.0 PC Camera
[ 7.330400] usb 1-1.1: Manufacturer: Alcor Micro, Corp.
[ 7.419277] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[ 7.516421] usb 2-1.3: New USB device found, idVendor=0a5c, idProduct=219c
[ 7.516506] usb 2-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 7.516592] usb 2-1.3: Product: Broadcom BCM2070 Bluetooth Device
[ 7.516659] usb 2-1.3: Manufacturer: Broadcom Corp
[ 7.516723] usb 2-1.3: SerialNumber: 001BB1F9E0EB
[ 7.587334] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
[ 7.681191] usb 2-1.4: New USB device found, idVendor=058f, idProduct=6335
[ 7.681277] usb 2-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 7.681366] usb 2-1.4: Product: Mass Storage Device
[ 7.681435] usb 2-1.4: Manufacturer: Generic
[ 7.681504] usb 2-1.4: SerialNumber: 058F63356336
[ 7.735245] cfg80211: World regulatory domain updated:
[ 7.735318] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 7.735402] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 7.735485] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 7.735566] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 7.735648] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 7.735731] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 7.825597] Bluetooth: Core ver 2.16
[ 7.825680] NET: Registered protocol family 31
[ 7.825746] Bluetooth: HCI device and connection manager initialized
[ 7.825824] Bluetooth: HCI socket layer initialized
[ 7.825894] Bluetooth: L2CAP socket layer initialized
[ 7.825979] Bluetooth: SCO socket layer initialized
[ 7.980861] usbcore: registered new interface driver btusb
[ 8.039796] media: Linux media interface: v0.10
[ 8.054791] Initializing USB Mass Storage driver...
[ 8.055001] scsi5 : usb-storage 2-1.4:1.0
[ 8.055137] usbcore: registered new interface driver usb-storage
[ 8.055212] USB Mass Storage support registered.
[ 8.116840] Linux video capture interface: v2.00
[ 8.228842] uvcvideo: Found UVC 1.00 device USB 2.0 PC Camera (1210:25f4)
[ 8.232470] input: USB 2.0 PC Camera as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input11
[ 8.232732] usbcore: registered new interface driver uvcvideo
[ 8.232804] USB Video Class driver (1.1.1)
[ 9.052365] scsi 5:0:0:0: Direct-Access Single Flash Reader 1.00
PQ: 0 ANSI: 0
[ 9.052996] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 9.360560] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 10.258398] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 10.603650] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 11.600242] fuse init (API version 7.21)
[ 11.626261] loop: module loaded
[ 11.941518] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts:
(null)
[ 13.020816] RPC: Registered named UNIX socket transport module.
[ 13.020900] RPC: Registered udp transport module.
[ 13.020970] RPC: Registered tcp transport module.
[ 13.021040] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.059818] FS-Cache: Loaded
[ 13.067459] Key type dns_resolver registered
[ 13.095686] FS-Cache: Netfs 'nfs' registered for caching
[ 13.142152] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 15.412524] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input12
[ 17.028169] Bluetooth: RFCOMM TTY layer initialized
[ 17.028250] Bluetooth: RFCOMM socket layer initialized
[ 17.028315] Bluetooth: RFCOMM ver 1.11
[ 17.061991] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.062064] Bluetooth: BNEP filters: protocol multicast
[ 17.062143] Bluetooth: BNEP socket layer initialized
[ 17.378744] lp: driver loaded but no devices found
[ 17.490285] ppdev: user-space parallel port driver
[ 20.773572] fglrx_pci 0000:01:00.0: irq 45 for MSI/MSI-X
[ 20.775287] <6>[fglrx] Firegl kernel thread PID: 2764
[ 20.775432] <6>[fglrx] Firegl kernel thread PID: 2765
[ 20.775597] <6>[fglrx] Firegl kernel thread PID: 2766
[ 20.775826] <6>[fglrx] IRQ 45 Enabled
[ 20.791321] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 20.791324] <6>[fglrx] Reserved FB block: Unshared offset:f8ca000,
size:436000
[ 20.791326] <6>[fglrx] Reserved FB block: Unshared offset:1fff4000,
size:c000
** Model information
sys_vendor: SAMSUNG ELECTRONICS CO., LTD.
product_name: R540/R580/R780/SA41/E452/E852
product_version: 03KP
chassis_vendor: SAMSUNG ELECTRONICS CO., LTD.
chassis_version: N/A
bios_vendor: American Megatrends Inc.
bios_version: 03KP.M008.20100927.LDG
board_vendor: SAMSUNG ELECTRONICS CO., LTD.
board_name: R540/R580/R780/SA41/E452/E852
board_version: 03KP
** Loaded modules:
parport_pc
ppdev
lp
parport
bnep
rfcomm
binfmt_misc
uinput
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
loop
fuse
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
usb_storage
media
btusb
bluetooth
fglrx(PO)
joydev
acpi_cpufreq
snd_hda_codec_hdmi
samsung_laptop
ehci_pci
mperf
lib80211_crypt_tkip
snd_hda_codec_realtek
sg
video
ehci_hcd
usbcore
wl(PO)
coretemp
kvm_intel
kvm
processor
sky2
snd_hda_intel
i2c_i801
snd_hda_codec
i2c_core
snd_hwdep
snd_pcm
iTCO_wdt
sr_mod
iTCO_vendor_support
lpc_ich
mfd_core
usb_common
psmouse
serio_raw
intel_ips
cdrom
snd_page_alloc
snd_seq
snd_seq_device
crc32c_intel
lib80211
cfg80211
snd_timer
snd
ac
pcspkr
evdev
microcode
rfkill
soundcore
battery
button
ext4
crc16
mbcache
jbd2
sd_mod
crc_t10dif
fan
thermal
thermal_sys
ahci
libahci
libata
scsi_mod
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller
[8086:0044] (rev 02)
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16
Root Port [8086:0045] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e0000000-f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4c08000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset
High Definition Audio [8086:3b56] (rev 05)
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f4c00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f3800000-f4bfffff
Prefetchable memory behind bridge: 00000000f4d00000-00000000f4efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 3 [8086:3b46] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=05, sec-latency=0
I/O behind bridge: 00007000-0000afff
Memory behind bridge: f0200000-f23fffff
Prefetchable memory behind bridge: 00000000f4f00000-00000000f50fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 4 [8086:3b48] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f2400000-f37fffff
Prefetchable memory behind bridge: 00000000f5100000-00000000f52fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f4c07000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC
Interface Controller [8086:3b09] (rev 05)
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset
4 port SATA AHCI Controller [8086:3b29] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 41
Region 0: I/O ports at e070 [size=8]
Region 1: I/O ports at e060 [size=4]
Region 2: I/O ports at e050 [size=8]
Region 3: I/O ports at e040 [size=4]
Region 4: I/O ports at e020 [size=32]
Region 5: Memory at f4c06000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus
Controller [8086:3b30] (rev 05)
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f4c05000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at e000 [size=32]
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400
Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f4c04000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel ips
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Park [Mobility Radeon HD 5430/5450/5470] [1002:68e0] (prog-if 00 [VGA
controller])
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at f0020000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at d000 [size=256]
Expansion ROM at f0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI
Audio [Radeon HD 5400/6300 Series] [1002:aa68]
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 44
Region 0: Memory at f0040000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n
Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Wistron NeWeb Corp. Device [185f:051a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f3800000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: wl
06:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E
Fast Ethernet Controller [11ab:4354]
Subsystem: Samsung Electronics Co Ltd Device [144d:c07f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f2400000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at b000 [size=256]
Capabilities: <access denied>
Kernel driver in use: sky2
3f:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath
Architecture Generic Non-core Registers [8086:2c62] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath
Architecture System Address Decoder [8086:2d01] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0
[8086:2d10] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0
[8086:2d11] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved
[8086:2d12] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved
[8086:2d13] (rev 02)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 002 Device 004: ID 058f:6335 Alcor Micro Corp. SD/MMC Card Reader
Bus 002 Device 003: ID 0a5c:219c Broadcom Corp.
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 1210:25f4 DigiTech
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (900, 'testing'), (800, 'unstable'), (100, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.9-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.9-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.113
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.9-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.9-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.9 <none>
Versions of packages linux-image-3.9-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.39
ii firmware-linux-nonfree 0.39
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.9-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64:
linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true
linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
