Package: src:linux
Version: 3.10.5-1
Followup-For: Bug #713943
The i2c_powermac module is not yet autoloading in 3.10.
-- Package-specific info:
** Version:
Linux version 3.10-2-powerpc64 (debian-ker...@lists.debian.org) (gcc version
4.7.3 (Debian 4.7.3-6) ) #1 SMP Debian 3.10.5-1 (2013-08-07)
** Command line:
root=UUID=a42a8274-d222-4616-9872-c8a93b0b138e ro quiet
** Not tainted
** Kernel log:
[ 7.342350] nouveau [ DRM] DCB conn 00: 1030
[ 7.342354] nouveau [ DRM] DCB conn 01: 2130
[ 7.343883] nouveau [ I2C][0000:0a:00.0] detected TMDS transmitter:
sil164
[ 7.459728] sil164 2-0038: Detected device 1:6.0
[ 7.462518] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.462521] [drm] No driver support for vblank timestamp query.
[ 7.462531] nouveau [ DRM] 0x14C5: Parsing digital output script table
[ 7.472933] media: Linux media interface: v0.10
[ 7.512599] nouveau [ DRM] 1 available performance level(s)
[ 7.512607] nouveau [ DRM] 0: core 300MHz shader 300MHz memory 500MHz
fanspeed 100%
[ 7.512613] nouveau [ DRM] c: core 300MHz shader 300MHz memory 500MHz
fanspeed 100%
[ 7.515986] nouveau [ DRM] MM: using M2MF for buffer copies
[ 7.516007] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 4)
[ 7.546038] Linux video capture interface: v2.00
[ 7.577144] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081d)
[ 7.590472] input: UVC Camera (046d:081d) as
/devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb3/3-1/3-1:1.2/input/input2
[ 7.590574] usbcore: registered new interface driver uvcvideo
[ 7.590576] USB Video Class driver (1.1.1)
[ 7.595325] nouveau [ DRM] allocated 1680x1050 fb: 0x9000, bo
c000000175813400
[ 7.605856] nouveau [ DRM] 0x14C5: Parsing digital output script table
[ 7.655384] Console: switching to colour frame buffer device 210x65
[ 7.656947] nouveau 0000:0a:00.0: fb0: nouveaufb frame buffer device
[ 7.656951] nouveau 0000:0a:00.0: registered panic notifier
[ 7.656959] [drm] Initialized nouveau 1.1.1 20120801 for 0000:0a:00.0 on
minor 0
[ 7.987077] set resolution quirk: cval->res = 384
[ 7.987355] usbcore: registered new interface driver snd-usb-audio
[ 13.251926] usb 2-2: New USB device found, idVendor=1131, idProduct=1001
[ 13.251933] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 13.251938] usb 2-2: Product: ISSCBTA
[ 13.369609] Bluetooth: Core ver 2.16
[ 13.369640] NET: Registered protocol family 31
[ 13.369644] Bluetooth: HCI device and connection manager initialized
[ 13.369718] Bluetooth: HCI socket layer initialized
[ 13.369723] Bluetooth: L2CAP socket layer initialized
[ 13.369742] Bluetooth: SCO socket layer initialized
[ 13.398448] usbcore: registered new interface driver btusb
[ 14.244284] Adding 5859368k swap on /dev/sdb3. Priority:-1 extents:1
across:5859368k
[ 14.324239] EXT4-fs (sdb5): re-mounted. Opts: (null)
[ 14.595081] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
[ 15.207124] fuse init (API version 7.22)
[ 15.262797] loop: module loaded
[ 15.571609] kjournald starting. Commit interval 5 seconds
[ 15.571833] EXT3-fs (sdb4): using internal journal
[ 15.571839] EXT3-fs (sdb4): mounted filesystem with ordered data mode
[ 16.798038] RPC: Registered named UNIX socket transport module.
[ 16.798044] RPC: Registered udp transport module.
[ 16.798047] RPC: Registered tcp transport module.
[ 16.798050] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 16.841104] FS-Cache: Loaded
[ 16.871176] Key type dns_resolver registered
[ 16.912852] FS-Cache: Netfs 'nfs' registered for caching
[ 16.985046] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 21.576380] lp: driver loaded but no devices found
[ 21.743119] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.743125] Bluetooth: BNEP filters: protocol multicast
[ 21.743141] Bluetooth: BNEP socket layer initialized
[ 21.829902] Bluetooth: RFCOMM TTY layer initialized
[ 21.829923] Bluetooth: RFCOMM socket layer initialized
[ 21.829927] Bluetooth: RFCOMM ver 1.11
[ 23.620086] u3msi: allocated virq 0x19 (hw 0x8) addr 0xfee00000
[ 23.660194] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.667900] u3msi: allocated virq 0x1a (hw 0x9) addr 0xfee00000
[ 23.708190] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 26.853135] tg3 0001:05:04.0 eth0: Link is up at 1000 Mbps, full duplex
[ 26.853149] tg3 0001:05:04.0 eth0: Flow control is on for TX and on for RX
[ 26.853191] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 29.088208] NFS: Registering the id_resolver key type
[ 29.088236] Key type id_resolver registered
[ 29.088240] Key type id_legacy registered
[ 44.147035] RPC: AUTH_GSS upcall timed out.
[ 44.147035] Please check user daemon is running.
[ 59.291034] RPC: AUTH_GSS upcall timed out.
[ 59.291034] Please check user daemon is running.
[ 74.471036] RPC: AUTH_GSS upcall timed out.
[ 74.471036] Please check user daemon is running.
[ 89.627041] RPC: AUTH_GSS upcall timed out.
[ 89.627041] Please check user daemon is running.
[ 104.723033] RPC: AUTH_GSS upcall timed out.
[ 104.723033] Please check user daemon is running.
[ 163.683105] compat_ioctl32: unknown ioctl 'V', dir=6, #26 (0xc050561a)
[ 163.689934] compat_ioctl32: unknown ioctl 'V', dir=6, #26 (0xc050561a)
[ 367.316222] PowerMac i2c bus smu 14 registered
[ 367.316286] PowerMac i2c bus smu 11 registered
[ 367.316894] PowerMac i2c bus mac-io 0 registered
[ 367.316979] PowerMac i2c bus mac-io 0 registered
[ 367.317106] PowerMac i2c bus u4 1 registered
[ 367.319510] windfarm: CPUs control loops started.
[ 367.390125] snd-aoa-codec-onyx: created and attached onyx instance
[ 367.390594] snd-aoa-codec-onyx: created and attached onyx instance
[ 368.465643] sat 0 partition c8: c8 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7
89 37 0 a0 0 0
[ 369.296362] sat 0 partition c4: c4 4 1 7f a0 12 20 5f ff 55 b8 14 7b 12 0 0
[ 370.370359] sat 0 partition c9: c9 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7
89 37 0 a0 0 0
[ 371.154532] sat 0 partition c5: c5 4 1 7f a0 12 20 5f ff 55 d7 15 7b 12 0 0
[ 372.178696] sat 1 partition c8: c8 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7
89 37 0 a0 0 0
[ 372.932360] sat 1 partition c4: c4 4 1 7f a0 12 20 5f ff 55 9a 13 7b 12 0 0
[ 374.274902] sat 1 partition c9: c9 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7
89 37 0 a0 0 0
[ 375.058678] sat 1 partition c5: c5 4 1 7f a0 12 20 5f ff 55 b8 14 7b 12 0 0
[ 375.753114] windfarm: Backside control loop started.
[ 375.810585] windfarm: Slots control loop started.
[ 375.930503] windfarm: Drive bay control loop started.
** Model information
revision : 1.1 (pvr 0044 0101)
revision : 1.1 (pvr 0044 0101)
revision : 1.1 (pvr 0044 0101)
revision : 1.1 (pvr 0044 0101)
platform : PowerMac
model : PowerMac11,2
machine : PowerMac11,2
motherboard : PowerMac11,2 MacRISC4 Power Macintosh
** Loaded modules:
snd_aoa_codec_onyx
snd_aoa
i2c_powermac
nfsv3
rpcsec_gss_krb5
nfsv4
rfcomm
parport_pc
bnep
lp
parport
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
dns_resolver
lockd
fscache
sunrpc
ext3
jbd
loop
fuse
btusb
bluetooth
rfkill
snd_usb_audio
snd_usbmidi_lib
snd_hwdep
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_pcm
snd_seq
snd_seq_device
snd_timer
snd
soundcore
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
snd_page_alloc
media
sil164
evdev
joydev
nouveau
ttm
drm_kms_helper
drm
ext4
crc16
jbd2
mbcache
windfarm_cpufreq_clamp
windfarm_max6690_sensor
windfarm_lm75_sensor
windfarm_smu_sensors
windfarm_smu_controls
windfarm_pm112
windfarm_smu_sat
windfarm_pid
windfarm_core
sd_mod
crc_t10dif
ata_generic
hid_logitech
ff_memless
usbhid
hid
ehci_pci
ohci_hcd
ehci_hcd
sg
usbcore
firewire_ohci
sr_mod
cdrom
usb_common
firewire_core
crc_itu_t
sata_svw
tg3
ptp
pps_core
libphy
** PCI devices:
0000:00:0b.0 PCI bridge [0604]: Apple Inc. CPC945 PCIe Bridge [106b:005b]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: 00000000-0000ffff
Memory behind bridge: 90000000-afffffff
Prefetchable memory behind bridge: 00000000f1000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
0000:0a:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV43 [GeForce
6600] [10de:0141] (rev a2) (prog-if 00 [VGA controller])
Subsystem: NVIDIA Corporation Device [10de:0010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at a1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at 90000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at a0000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at a2000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
0001:00:00.0 Host bridge [0600]: Apple Inc. U4 HT Bridge [106b:0074]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
0001:00:01.0 PCI bridge [0604]: Broadcom BCM5780 [HT2000] PCI-X bridge
[1166:0130] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:02.0 PCI bridge [0604]: Broadcom BCM5780 [HT2000] PCI-X bridge
[1166:0130] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Memory behind bridge: fa500000-fa5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:03.0 PCI bridge [0604]: Broadcom BCM5780 [HT2000] PCI-Express Bridge
[1166:0132] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
0001:00:04.0 PCI bridge [0604]: Broadcom BCM5780 [HT2000] PCI-Express Bridge
[1166:0132] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
0001:00:05.0 PCI bridge [0604]: Broadcom BCM5780 [HT2000] PCI-Express Bridge
[1166:0132] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
0001:00:06.0 PCI bridge [0604]: Broadcom BCM5780 [HT2000] PCI-Express Bridge
[1166:0132] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=09, subordinate=09, sec-latency=32
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
0001:00:07.0 PCI bridge [0604]: Apple Inc. Shasta PCI Bridge [106b:0053]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: fa000000-fa3fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:08.0 PCI bridge [0604]: Apple Inc. Shasta PCI Bridge [106b:0054]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: 80000000-800fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:00:09.0 PCI bridge [0604]: Apple Inc. Shasta PCI Bridge [106b:0055]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: fa400000-fa4fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:01:07.0 Unassigned class [ff00]: Apple Inc. Shasta Mac I/O [106b:004f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 64 bytes
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: macio
0001:01:0b.0 USB controller [0c03]: NEC Corporation OHCI USB Controller
[1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB Controller [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 70
Region 0: Memory at 80082000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
0001:01:0b.1 USB controller [0c03]: NEC Corporation OHCI USB Controller
[1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB Controller [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 70
Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
0001:01:0b.2 USB controller [0c03]: NEC Corporation uPD72010x USB 2.0
Controller [1033:00e0] (rev 04) (prog-if 20 [EHCI])
Subsystem: NEC Corporation uPD72010x USB 2.0 Controller [1033:00e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (4000ns min, 8500ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 70
Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
0001:03:0c.0 IDE interface [0101]: Broadcom K2 SATA [1166:0240] (prog-if 8f
[Master SecP SecO PriP PriO])
Subsystem: Broadcom K2 SATA [1166:0240]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16
Interrupt: pin ? routed to IRQ 18
Region 0: I/O ports at <unassigned> [disabled]
Region 1: I/O ports at <unassigned> [disabled]
Region 2: I/O ports at <unassigned> [disabled]
Region 3: I/O ports at <unassigned> [disabled]
Region 4: I/O ports at <unassigned> [disabled]
Region 5: Memory at fa402000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: sata_svw
0001:03:0d.0 Unassigned class [ff00]: Apple Inc. Shasta IDE [106b:0050]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 38
Region 0: Memory at fa404000 (32-bit, non-prefetchable) [size=16K]
Kernel driver in use: pata-pci-macio
0001:03:0e.0 FireWire (IEEE 1394) [0c00]: Apple Inc. Shasta Firewire
[106b:0052] (prog-if 10 [OHCI])
Subsystem: Apple Inc. Device [106b:5811]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 39
Region 0: Memory at fa400000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
0001:05:04.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5780
Gigabit Ethernet [14e4:166a] (rev 03)
Subsystem: Apple Inc. Device [106b:0085]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Region 0: Memory at fa530000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at fa520000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
0001:05:04.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5780
Gigabit Ethernet [14e4:166a] (rev 03)
Subsystem: Apple Inc. Device [106b:0085]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 26
Region 0: Memory at fa510000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at fa500000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
** USB devices:
Bus 003 Device 002: ID 046d:081d Logitech, Inc. HD Webcam C510
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 1131:1001 Integrated System Solution Corp. KY-BT100
Bluetooth Adapter
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: powerpc (ppc64)
Kernel: Linux 3.10-2-powerpc64 (SMP w/4 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.10-2-powerpc64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.113
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.10-2-powerpc64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.10-2-powerpc64 suggests:
pn debian-kernel-handbook <none>
pn linux-doc-3.10 <none>
pn mkvmlinuz <none>
Versions of packages linux-image-3.10-2-powerpc64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.39
ii firmware-linux-nonfree 0.39
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.10-2-powerpc64/postinst/ignoring-ramdisk:
linux-image-3.10-2-powerpc64/prerm/removing-running-kernel-3.10-2-powerpc64:
true
linux-image-3.10-2-powerpc64/postinst/missing-firmware-3.10-2-powerpc64:
linux-image-3.10-2-powerpc64/postinst/depmod-error-initrd-3.10-2-powerpc64:
false
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
