Package: src:linux
Version: 3.2.46-1
Severity: normal
Dear Maintainer,
The kernel goes to crash using rtl8185l wireless pci adapter. Is necessary to
download the driver from the official realteck website and remove the kernel
driver in order to use the adapter.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-686-pae (debian-ker...@lists.debian.org) (gcc version
4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae
root=UUID=0ad18663-06df-4b9f-b65b-9edd283fba84 ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 6.387793] [drm] VGA
[ 6.387800] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c
0x7e4c
[ 6.387805] [drm] Encoders:
[ 6.387809] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 6.387814] [drm] Connector 1:
[ 6.387817] [drm] S-video
[ 6.387821] [drm] Encoders:
[ 6.387825] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 6.387829] [drm] Connector 2:
[ 6.387833] [drm] DVI-I
[ 6.387837] [drm] HPD1
[ 6.387843] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c
0x7e5c
[ 6.387848] [drm] Encoders:
[ 6.387852] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 6.387857] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 6.387868] [drm] Possible lm63 thermal controller at 0x4c
[ 6.389539] lirc_dev: IR Remote Control driver registered, major 251
[ 6.396081] saa7134[0]: i2c eeprom 00: 3b 15 42 11 ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.396108] saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.396130] saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.396151] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.396171] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.396192] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.396212] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.396233] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.396253] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.396273] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.396293] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.396314] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.396334] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.396354] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.396375] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.396395] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 6.416633] IR LIRC bridge handler initialized
[ 6.419890] i2c-core: driver [tuner] using legacy suspend method
[ 6.419892] i2c-core: driver [tuner] using legacy resume method
[ 6.477182] [drm] fb mappable at 0xC00C0000
[ 6.477184] [drm] vram apper at 0xC0000000
[ 6.477186] [drm] size 8294400
[ 6.477187] [drm] fb depth is 24
[ 6.477188] [drm] pitch is 7680
[ 6.477296] fbcon: radeondrmfb (fb0) is primary device
[ 6.552311] Console: switching to colour frame buffer device 240x67
[ 6.596178] fb0: radeondrmfb frame buffer device
[ 6.596184] drm: registered panic notifier
[ 6.596239] [drm] Initialized radeon 2.16.0 20080528 for 0000:02:00.0 on
minor 0
[ 6.644082] All bytes are equal. It is not a TEA5767
[ 6.644104] tuner 0-0060: Tuner -1 found with type(s) Radio TV.
[ 6.662070] input: ImExPS/2 Logitech Wheel Mouse as
/devices/platform/i8042/serio1/input/input5
[ 6.740128] tuner-simple 0-0060: creating new instance
[ 6.740139] tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and
compatibles))
[ 6.764360] saa7134[0]: registered device video0 [v4l2]
[ 6.764447] saa7134[0]: registered device vbi0
[ 6.820862] ACPI: resource nForce2_smbus [io 0x0600-0x063f] conflicts with
ACPI region SMRG [io 0x600-0x6ff]
[ 6.820878] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 6.844098] i2c i2c-7: nForce2 SMBus adapter at 0x700
[ 6.901614] gspca_main: v2.14.0 registered
[ 6.902900] gspca_main: cpia1-2.14.0 probing 0553:0002
[ 6.955033] saa7134 ALSA driver for DMA sound loaded
[ 6.955100] saa7134[0]/alsa: saa7134[0] at 0xdfeffc00 irq 19 registered as
card -1
[ 6.973822] gspca_main: ov519-2.14.0 probing 041e:405f
[ 6.974097] gspca_cpia1: usb_control_msg 04, error -62
[ 6.974245] cpia1: probe of 2-7:1.1 failed with error -62
[ 6.974307] usbcore: registered new interface driver cpia1
[ 9.758297] input: ov519 as
/devices/pci0000:00/0000:00:02.0/usb2/2-4/input/input6
[ 9.758600] usbcore: registered new interface driver ov519
[ 10.786276] Adding 5828604k swap on /dev/sda5. Priority:-1 extents:1
across:5828604k
[ 10.821233] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 11.052416] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 11.196518] loop: module loaded
[ 11.260517] it87: Found IT8721F chip at 0x290, revision 1
[ 11.260605] ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI
region SIOE [io 0x290-0x2af]
[ 11.260614] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 12.769157] Bridge firewalling registered
[ 12.776380] device eth0 entered promiscuous mode
[ 12.795835] forcedeth 0000:00:07.0: irq 44 for MSI/MSI-X
[ 12.799626] br0: port 1(eth0) entering forwarding state
[ 12.799646] br0: port 1(eth0) entering forwarding state
[ 17.948370] Bluetooth: Core ver 2.16
[ 17.948387] NET: Registered protocol family 31
[ 17.948389] Bluetooth: HCI device and connection manager initialized
[ 17.948392] Bluetooth: HCI socket layer initialized
[ 17.948393] Bluetooth: L2CAP socket layer initialized
[ 17.948397] Bluetooth: SCO socket layer initialized
[ 17.986423] Bluetooth: RFCOMM TTY layer initialized
[ 17.986437] Bluetooth: RFCOMM socket layer initialized
[ 17.986443] Bluetooth: RFCOMM ver 1.11
[ 18.162766] vboxdrv: Found 4 processor cores.
[ 18.163104] vboxdrv: fAsync=0 offMin=0xc2b offMax=0x3d66
[ 18.163280] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 18.163287] vboxdrv: Successfully loaded version 4.2.16 (interface
0x001a0005).
[ 18.634737] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.634746] Bluetooth: BNEP filters: protocol multicast
[ 18.695227] vboxpci: IOMMU not found (not compiled)
[ 19.758364] lp0: using parport0 (interrupt-driven).
[ 19.777369] ppdev: user-space parallel port driver
[ 22.173488] tun: Universal TUN/TAP device driver, 1.6
[ 22.173496] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 23.200060] br0: no IPv6 routers present
[ 27.808048] br0: port 1(eth0) entering forwarding state
** Model information
not available
** Loaded modules:
tun
ppdev
lp
pci_stub
vboxpci(O)
vboxnetadp(O)
bnep
vboxnetflt(O)
vboxdrv(O)
rfcomm
bluetooth
rfkill
bridge
stp
hwmon_vid
loop
gspca_ov519
saa7134_alsa
gspca_cpia1
gspca_main
tuner_simple
tuner_types
tea5767
lm63
tuner
ir_lirc_codec
lirc_dev
ir_mce_kbd_decoder
ir_sony_decoder
snd_hda_codec_via
ir_jvc_decoder
ir_rc6_decoder
rc_cinergy
radeon
saa7134
tveeprom
videobuf_dma_sg
videobuf_core
ir_rc5_decoder
ttm
parport_pc
drm_kms_helper
ir_nec_decoder
v4l2_common
i2c_nforce2
videodev
media
rc_core
powernow_k8
drm
power_supply
i2c_algo_bit
mperf
processor
i2c_core
thermal_sys
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
parport
snd_page_alloc
k10temp
psmouse
serio_raw
evdev
snd_seq
snd_seq_device
snd_timer
snd
asus_atk0110
soundcore
pcspkr
button
ext4
crc16
jbd2
mbcache
sg
sr_mod
sd_mod
cdrom
crc_t10dif
ohci_hcd
ata_generic
pata_amd
sata_nv
libata
ehci_hcd
forcedeth
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 RAM memory [0500]: NVIDIA Corporation MCP61 Host Bridge [10de:03e2]
(rev a1)
Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard [1043:83a4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP61 LPC Bridge [10de:03e1] (rev
a2)
Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard [1043:83a4]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at 0900 [size=256]
00:01.1 SMBus [0c05]: NVIDIA Corporation MCP61 SMBus [10de:03eb] (rev a2)
Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard [1043:83a4]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 0e00 [size=64]
Region 4: I/O ports at 0600 [size=64]
Region 5: I/O ports at 0700 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:01.2 RAM memory [0500]: NVIDIA Corporation MCP61 Memory Controller
[10de:03f5] (rev a2)
Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard [1043:83a4]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:02.0 USB controller [0c03]: NVIDIA Corporation MCP61 USB 1.1 Controller
[10de:03f1] (rev a3) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard [1043:83a4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at dfdfb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:02.1 USB controller [0c03]: NVIDIA Corporation MCP61 USB 2.0 Controller
[10de:03f2] (rev a3) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard [1043:83a4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at dfdfac00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:04.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI bridge [10de:03f3] (rev
a1) (prog-if 01 [Subtractive decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: dfe00000-dfefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:05.0 Audio device [0403]: NVIDIA Corporation MCP61 High Definition Audio
[10de:03f0] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:840c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at dfdf4000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:06.0 IDE interface [0101]: NVIDIA Corporation MCP61 IDE [10de:03ec] (rev a2)
(prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard [1043:83a4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_amd
00:07.0 Bridge [0680]: NVIDIA Corporation MCP61 Ethernet [10de:03ef] (rev a2)
Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard [1043:83a4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 44
Region 0: Memory at dfdf9000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at d480 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
00:08.0 IDE interface [0101]: NVIDIA Corporation MCP61 SATA Controller
[10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard [1043:83a4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at d400 [size=8]
Region 1: I/O ports at d080 [size=4]
Region 2: I/O ports at d000 [size=8]
Region 3: I/O ports at cc00 [size=4]
Region 4: I/O ports at c880 [size=16]
Region 5: Memory at dfdf8000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:08.1 IDE interface [0101]: NVIDIA Corporation MCP61 SATA Controller
[10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard [1043:83a4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: I/O ports at c800 [size=8]
Region 1: I/O ports at c480 [size=4]
Region 2: I/O ports at c400 [size=8]
Region 3: I/O ports at c080 [size=4]
Region 4: I/O ports at c000 [size=16]
Region 5: Memory at dfdef000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:09.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge
[10de:03e8] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: dff00000-dfffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge
[10de:03e9] (rev a2) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0c.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge
[10de:03e9] (rev a2) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
01:06.0 Multimedia controller [0480]: Philips Semiconductors SAA7134/SAA7135HL
Video Broadcast Decoder [1131:7134] (rev 01)
Subsystem: TERRATEC Electronic GmbH Terratec Cinergy 400 TV [153b:1142]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min, 63750ns max)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at dfeffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: saa7134
02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI
RV535 [Radeon X1650 Series] [1002:71c7] (rev 9e) (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Device [174b:0840]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at dfff0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at e800 [size=256]
Expansion ROM at dffc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
02:00.1 Display controller [0380]: Advanced Micro Devices [AMD] nee ATI RV535
[Radeon X1650 Series] [1002:71e7] (rev 9e)
Subsystem: PC Partner Limited Device [174b:0841]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at dffe0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 041e:405f Creative Technology, Ltd
Bus 002 Device 003: ID 0553:0002 STMicroelectronics Imaging Division (VLSI
Vision) CPiA Webcam
-- System Information:
Debian Release: 7.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-4-686-pae (SMP w/4 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-686-pae depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-686-pae recommends:
ii firmware-linux-free 3.2
pn libc6-i686 <none>
Versions of packages linux-image-3.2.0-4-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-686-pae/postinst/depmod-error-initrd-3.2.0-4-686-pae:
false
linux-image-3.2.0-4-686-pae/prerm/removing-running-kernel-3.2.0-4-686-pae:
true
linux-image-3.2.0-4-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-686-pae/postinst/missing-firmware-3.2.0-4-686-pae:
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
