Package: src:linux
Version: 3.9.6-1
Severity: wishlist
As of 3.9, the Debian kernel includes Yama, which switches on ptrace
protection by default. This is a bad idea, because:
* It isn't a real protection. As said in bug 712663, to be able to
use ptrace in a useful way is equivalent to have a shell access
under the identity of the user, and with such a shell access, an
attacker can already do a lot of damage (e.g. from the full access
to the files of the user).
* It prevents some debugging applications such as gdb and strace
from debugging a running process, which can be necessary when
sending bug reports. And the error messages are obscure, and no
documentation in Debian packages says how to solve the problem
(web pages found via Google just suggest to revert this feature
by setting /proc/sys/kernel/yama/ptrace_scope to 0, which is
precisely the point of this bug report).
* For security, there are other protection mechanisms: sensible
processes can prevent from being attached. This is what ssh-agent
does.
-- Package-specific info:
** Version:
Linux version 3.9-1-amd64 (debian-ker...@lists.debian.org) (gcc version 4.7.3
(Debian 4.7.3-4) ) #1 SMP Debian 3.9.6-1
** Command line:
root=/dev/mapper/xvii-root ro quiet reboot=pci
** Not tainted
** Kernel log:
[ 382.945280] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 382.961311] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
[ 382.961315] nouveau [ PFB][0000:01:00.0] RAM size: 256 MiB
[ 382.961317] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
[ 382.964883] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 382.964894] excluding 0xc0000-0xd3fff 0xe0000-0xfffff
[ 382.964921] pcmcia_socket pcmcia_socket0: cs: memory probe
0xa0000000-0xa0ffffff:
[ 382.964939] excluding 0xa0000000-0xa0ffffff
[ 382.964954] pcmcia_socket pcmcia_socket0: cs: memory probe
0x60000000-0x60ffffff:
[ 382.964972] excluding 0x60000000-0x60ffffff
[ 382.987337] nouveau [ PTHERM][0000:01:00.0] FAN control: PWM
[ 382.987348] nouveau [ PTHERM][0000:01:00.0] fan management: disabled
[ 382.987359] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 382.987364] nouveau [ PTHERM][0000:01:00.0] Programmed thresholds [ 90(3),
95(3), 105(2), 110(5) ]
[ 382.987534] [TTM] Zone kernel: Available graphics memory: 2024580 kiB
[ 382.987536] [TTM] Initializing pool allocator
[ 382.987541] [TTM] Initializing DMA pool allocator
[ 382.987558] mtrr: type mismatch for e0000000,10000000 old: write-back new:
write-combining
[ 382.987561] nouveau [ DRM] VRAM: 256 MiB
[ 382.987563] nouveau [ DRM] GART: 512 MiB
[ 382.987568] nouveau [ DRM] TMDS table version 2.0
[ 382.987570] nouveau [ DRM] DCB version 4.0
[ 382.987573] nouveau [ DRM] DCB outp 00: 01000323 00010034
[ 382.987576] nouveau [ DRM] DCB outp 01: 02011300 00000028
[ 382.987578] nouveau [ DRM] DCB outp 02: 02022386 0f200010
[ 382.987580] nouveau [ DRM] DCB outp 03: 02022332 00020010
[ 382.987582] nouveau [ DRM] DCB outp 04: 040333a6 0f200010
[ 382.987585] nouveau [ DRM] DCB outp 05: 04033312 00020010
[ 382.987587] nouveau [ DRM] DCB conn 00: 00000041
[ 382.987589] nouveau [ DRM] DCB conn 01: 00000100
[ 382.987592] nouveau [ DRM] DCB conn 02: 00005246
[ 382.987594] nouveau [ DRM] DCB conn 03: 0000a346
[ 383.001725] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 383.001728] [drm] No driver support for vblank timestamp query.
[ 383.001731] nouveau [ DRM] ACPI backlight interface available, not
registering our own
[ 383.001898] nouveau [ DRM] 4 available performance level(s)
[ 383.001902] nouveau [ DRM] 0: core 169MHz shader 338MHz memory 100MHz
voltage 900mV fanspeed 100%
[ 383.001906] nouveau [ DRM] 1: core 275MHz shader 550MHz memory 250MHz
voltage 900mV fanspeed 100%
[ 383.001910] nouveau [ DRM] 2: core 500MHz shader 1000MHz memory 400MHz
voltage 1090mV fanspeed 100%
[ 383.001914] nouveau [ DRM] 3: core 580MHz shader 1450MHz memory 400MHz
voltage 1170mV fanspeed 100%
[ 383.001918] nouveau [ DRM] c: core 275MHz shader 550MHz memory 249MHz
voltage 900mV
[ 383.020521] nouveau [ DRM] MM: using M2MF for buffer copies
[ 383.064945] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_0.3M
(0c45:63f8)
[ 383.079179] input: Laptop_Integrated_Webcam_0.3M as
/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input14
[ 383.079318] usbcore: registered new interface driver uvcvideo
[ 383.079320] USB Video Class driver (1.1.1)
[ 383.111605] nouveau [ DRM] allocated 1920x1200 fb: 0x60000, bo
ffff8801189f0c00
[ 383.111713] fbcon: nouveaufb (fb0) is primary device
[ 383.184523] dell_wmi: Received unknown WMI event (0x11)
[ 383.995818] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 384.047922] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input15
[ 384.059715] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 384.059793] input: HDA Intel Dock Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 384.059860] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 384.059930] input: HDA Intel Dock Line Out as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 384.468862] dell_wmi: Received unknown WMI event (0x11)
[ 384.493523] Console: switching to colour frame buffer device 180x56
[ 384.496488] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 384.496490] nouveau 0000:01:00.0: registered panic notifier
[ 384.496495] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on
minor 0
[ 387.453358] EXT3-fs (dm-1): using internal journal
[ 388.358843] fuse init (API version 7.21)
[ 388.430465] loop: module loaded
[ 389.130668] Adding 9928700k swap on /dev/mapper/xvii-swap_1. Priority:-1
extents:1 across:9928700k
[ 401.500599] RPC: Registered named UNIX socket transport module.
[ 401.500608] RPC: Registered udp transport module.
[ 401.500612] RPC: Registered tcp transport module.
[ 401.500617] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 401.611265] FS-Cache: Loaded
[ 401.626213] Key type dns_resolver registered
[ 401.719405] FS-Cache: Netfs 'nfs' registered for caching
[ 401.836961] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 404.300226] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input20
[ 408.502006] Bluetooth: RFCOMM TTY layer initialized
[ 408.502021] Bluetooth: RFCOMM socket layer initialized
[ 408.502023] Bluetooth: RFCOMM ver 1.11
[ 408.617856] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 408.617859] Bluetooth: BNEP filters: protocol multicast
[ 408.617869] Bluetooth: BNEP socket layer initialized
[ 415.047449] lp: driver loaded but no devices found
[ 415.050362] ppdev: user-space parallel port driver
[ 423.542722] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 425.853499] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 425.956114] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 425.956235] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 427.772905] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control:
None
[ 427.773016] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 427.773048] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 427.944040] device eth0 entered promiscuous mode
[ 427.949768] device eth0 left promiscuous mode
[ 439.395377] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[ 439.398398] iwlwifi 0000:0c:00.0: Radio type=0x0-0x2-0x0
[ 439.619114] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S
[ 439.622119] iwlwifi 0000:0c:00.0: Radio type=0x0-0x2-0x0
[ 439.748604] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 471.699499] dell_wmi: Received unknown WMI event (0x11)
[ 522.247175] dell_wmi: Received unknown WMI event (0x11)
[ 543.095535] dell_wmi: Received unknown WMI event (0x11)
[100187.458048] CE: hpet increased min_delta_ns to 20113 nsec
[216014.947250] ptrace of pid 23238 was attempted by: gdb (pid 31222)
** Model information
sys_vendor: Dell Inc.
product_name: Latitude E6400
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A12
board_vendor: Dell Inc.
board_name: 0K672N
board_version:
** Loaded modules:
cpufreq_powersave
cpufreq_stats
cpufreq_userspace
cpufreq_conservative
xt_multiport
iptable_filter
ip_tables
x_tables
parport_pc
ppdev
lp
parport
bnep
rfcomm
binfmt_misc
uinput
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
ext2
firewire_sbp2
loop
fuse
snd_hda_codec_idt
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
uvcvideo
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
arc4
nouveau
snd_seq
snd_seq_device
iwldvm
snd_timer
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
coretemp
mac80211
pcmcia
joydev
media
snd
dell_wmi
yenta_socket
btusb
kvm
mxm_wmi
ttm
i2c_i801
drm_kms_helper
drm
i2c_algo_bit
iTCO_wdt
iTCO_vendor_support
i2c_core
acpi_cpufreq
pcmcia_rsrc
mperf
sparse_keymap
wmi
soundcore
iwlwifi
cfg80211
microcode
lpc_ich
mfd_core
bluetooth
crc16
rfkill
dell_laptop
pcmcia_core
dcdbas
psmouse
pcspkr
serio_raw
processor
evdev
video
ac
button
battery
ext3
mbcache
jbd
sha256_generic
cbc
hid_apple
hid_generic
usbhid
hid
dm_crypt
dm_mod
sg
sd_mod
sr_mod
crc_t10dif
cdrom
thermal
thermal_sys
firewire_ohci
sdhci_pci
sdhci
ahci
libahci
firewire_core
crc_itu_t
mmc_core
uhci_hcd
ehci_pci
ehci_hcd
libata
scsi_mod
e1000e
ptp
pps_core
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory
Controller Hub [8086:2a40] (rev 07)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI
Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f2000000-f6efffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network
Connection [8086:10f5] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f6fe0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f6fdb000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at efe0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f60 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f80 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6fa0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller [8086:293e] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f6fdc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f0600000-f07fffff
Prefetchable memory behind bridge: 00000000f0800000-00000000f09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f1f00000-f1ffffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0000000-f01fffff
Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f20 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6f40 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f1e00000-f1efffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller
[8086:2917] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 Mobile SATA
Controller [RAID mode] [8086:282a] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 45
Region 0: I/O ports at 6e70 [size=8]
Region 1: I/O ports at 6e78 [size=4]
Region 2: I/O ports at 6e80 [size=8]
Region 3: I/O ports at 6e88 [size=4]
Region 4: I/O ports at 6ea0 [size=32]
Region 5: Memory at fed1c800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller
[8086:2930] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f6fdaf00 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1100 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G98M [Quadro NVS
160M] [10de:06eb] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f2000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at df00 [size=128]
[virtual] Expansion ROM at f4000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
03:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: f0c00000-f0ffffff (prefetchable)
Memory window 1: f1000000-f13fffff
I/O window 0: 00002400-000024ff
I/O window 1: 00002000-000020ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
03:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller
[1180:0832] (rev 04) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f1eff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
03:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
Host Adapter [1180:0822] (rev 21) (prog-if 01)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f1eff700 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
0c:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300
[8086:4235]
Subsystem: Intel Corporation Device [8086:1121]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f1ffe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
** USB devices:
Bus 001 Device 004: ID 0c45:63f8 Microdia Sonix Integrated Webcam
Bus 002 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of
BCM2046 Bluetooth)
Bus 004 Device 002: ID 0a5c:5800 Broadcom Corp. BCM5880 Secure Applications
Processor
Bus 008 Device 002: ID 05ac:1006 Apple, Inc. Hub in Aluminum Keyboard
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 413c:8157 Dell Computer Corp. Integrated Keyboard
Bus 002 Device 004: ID 413c:8158 Dell Computer Corp. Integrated Touchpad /
Trackstick
Bus 002 Device 005: ID 413c:8156 Dell Computer Corp. Wireless 370 Bluetooth
Mini-card
Bus 008 Device 003: ID 05ac:0221 Apple, Inc. Aluminum Keyboard (ISO)
Bus 008 Device 004: ID 15d9:0a4c Trust International B.V. USB+PS/2 Optical Mouse
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1,
'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.9-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=POSIX, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.9-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.112
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.9-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.9-1-amd64 suggests:
ii debian-kernel-handbook 1.0.15
pn grub-pc | extlinux | lilo <none>
ii linux-doc-3.9 3.9.6-1
Versions of packages linux-image-3.9-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.38
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.9-1-amd64/postinst/ignoring-ramdisk:
* linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64:
linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true
linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
