Package: hugin
Version: 2013.0.0~beta1+dfsg-3
Severity: critical
Justification: breaks unrelated software
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation? Simply start hugin from a terminal and teh
whole X system crashes and cannot be started again till the sytem is rebooted.
* What exactly did you do (or not do) that was effective (or
ineffective)? I tried opening the program manually from the terminal as I
usually do. The program window hardly appears when the whole X system crashes.
* What was the outcome of this action? A crash of the whole X system.
* What outcome did you expect instead? Well, being able to open and use the
program as usual.
I am also enclosing the X log that may show why the X server is crashing (the
problem might be in the driver and not the program, no idea).
Thank you!
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.9-1-amd64 (SMP w/1 CPU core)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages hugin depends on:
ii enblend 4.0+dfsg-5
ii enfuse 4.0+dfsg-5
ii hugin-tools 2013.0.0~beta1+dfsg-3
ii libboost-signals1.53.0 1.53.0-5
ii libboost-system1.53.0 1.53.0-5
ii libboost-thread1.53.0 1.53.0-5
ii libc6 2.17-4
ii libexiv2-12 0.23-1
ii libgcc1 1:4.8.1-1
ii libgl1-mesa-glx [libgl1] 8.0.5-6
ii libglew1.7 1.7.0-3
ii libglu1-mesa [libglu1] 8.0.5-6
ii libimage-exiftool-perl 9.13-1
ii libpano13-2 2.9.18+dfsg-6
ii libstdc++6 4.8.1-1
ii libtiff4 3.9.6-11
ii libwxbase2.8-0 2.8.12.1-12
ii libwxgtk2.8-0 2.8.12.1-12
ii make 3.81-8.2
hugin recommends no packages.
hugin suggests no packages.
-- no debconf information
[ 46.175]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 46.175] X Protocol Version 11, Revision 0
[ 46.175] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
[ 46.175] Current Operating System: Linux halconmilenario 3.9-1-amd64 #1 SMP Debian 3.9.4-1 x86_64
[ 46.175] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.9-1-amd64 root=UUID=22f79972-4a3e-4703-a5e8-d3fd0cbb743d ro acpi_enforce_resources=lax quiet
[ 46.175] Build Date: 17 April 2013 10:22:47AM
[ 46.175] xorg-server 2:1.12.4-6 (Julien Cristau <[email protected]>)
[ 46.175] Current version of pixman: 0.26.0
[ 46.175] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 46.175] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 46.176] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 4 12:00:47 2013
[ 46.205] (==) Using config file: "/etc/X11/xorg.conf"
[ 46.205] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 46.218] (==) ServerLayout "Default Layout"
[ 46.218] (**) |-->Screen "Default Screen" (0)
[ 46.218] (**) | |-->Monitor "Generic Monitor"
[ 46.218] (**) | |-->Device "Gforce 6100"
[ 46.218] (**) |-->Input Device "Generic Keyboard"
[ 46.218] (**) |-->Input Device "Configured Mouse"
[ 46.218] (==) Automatically adding devices
[ 46.218] (==) Automatically enabling devices
[ 46.253] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 46.253] Entry deleted from font path.
[ 46.271] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 46.271] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 46.271] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 46.271] (WW) Disabling Generic Keyboard
[ 46.271] (WW) Disabling Configured Mouse
[ 46.271] (II) Loader magic: 0x7f4f949bcae0
[ 46.271] (II) Module ABI versions:
[ 46.271] X.Org ANSI C Emulation: 0.4
[ 46.271] X.Org Video Driver: 12.1
[ 46.271] X.Org XInput driver : 16.0
[ 46.271] X.Org Server Extension : 6.0
[ 46.273] (--) PCI:*(0:0:5:0) 10de:0242:1462:7207 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
[ 46.274] (II) Open ACPI successful (/var/run/acpid.socket)
[ 46.274] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 46.274] (II) "dbe" will be loaded by default.
[ 46.274] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 46.274] (II) "record" will be loaded by default.
[ 46.274] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 46.274] (II) "dri2" will be loaded by default.
[ 46.274] (II) LoadModule: "dri"
[ 46.305] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 46.326] (II) Module dri: vendor="X.Org Foundation"
[ 46.326] compiled for 1.12.4, module version = 1.0.0
[ 46.326] ABI class: X.Org Server Extension, version 6.0
[ 46.326] (II) Loading extension XFree86-DRI
[ 46.326] (II) LoadModule: "extmod"
[ 46.326] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 46.339] (II) Module extmod: vendor="X.Org Foundation"
[ 46.339] compiled for 1.12.4, module version = 1.0.0
[ 46.339] Module class: X.Org Server Extension
[ 46.339] ABI class: X.Org Server Extension, version 6.0
[ 46.339] (II) Loading extension SELinux
[ 46.339] (II) Loading extension MIT-SCREEN-SAVER
[ 46.339] (II) Loading extension XFree86-VidModeExtension
[ 46.339] (II) Loading extension XFree86-DGA
[ 46.339] (II) Loading extension DPMS
[ 46.339] (II) Loading extension XVideo
[ 46.339] (II) Loading extension XVideo-MotionCompensation
[ 46.339] (II) Loading extension X-Resource
[ 46.339] (II) LoadModule: "glx"
[ 46.340] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 46.355] (II) Module glx: vendor="X.Org Foundation"
[ 46.355] compiled for 1.12.4, module version = 1.0.0
[ 46.355] ABI class: X.Org Server Extension, version 6.0
[ 46.355] (==) AIGLX enabled
[ 46.356] (II) Loading extension GLX
[ 46.356] (II) LoadModule: "int10"
[ 46.363] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 46.375] (II) Module int10: vendor="X.Org Foundation"
[ 46.375] compiled for 1.12.4, module version = 1.0.0
[ 46.375] ABI class: X.Org Video Driver, version 12.1
[ 46.375] (II) LoadModule: "vbe"
[ 46.376] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 46.376] (II) Module vbe: vendor="X.Org Foundation"
[ 46.376] compiled for 1.12.4, module version = 1.1.0
[ 46.377] ABI class: X.Org Video Driver, version 12.1
[ 46.377] (II) LoadModule: "dbe"
[ 46.377] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 46.378] (II) Module dbe: vendor="X.Org Foundation"
[ 46.378] compiled for 1.12.4, module version = 1.0.0
[ 46.378] Module class: X.Org Server Extension
[ 46.378] ABI class: X.Org Server Extension, version 6.0
[ 46.378] (II) Loading extension DOUBLE-BUFFER
[ 46.378] (II) LoadModule: "record"
[ 46.378] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 46.379] (II) Module record: vendor="X.Org Foundation"
[ 46.379] compiled for 1.12.4, module version = 1.13.0
[ 46.379] Module class: X.Org Server Extension
[ 46.379] ABI class: X.Org Server Extension, version 6.0
[ 46.379] (II) Loading extension RECORD
[ 46.379] (II) LoadModule: "dri2"
[ 46.379] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 46.380] (II) Module dri2: vendor="X.Org Foundation"
[ 46.380] compiled for 1.12.4, module version = 1.2.0
[ 46.380] ABI class: X.Org Server Extension, version 6.0
[ 46.380] (II) Loading extension DRI2
[ 46.380] (II) LoadModule: "nouveau"
[ 46.381] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 46.425] (II) Module nouveau: vendor="X.Org Foundation"
[ 46.425] compiled for 1.12.4, module version = 1.0.1
[ 46.425] Module class: X.Org Video Driver
[ 46.425] ABI class: X.Org Video Driver, version 12.1
[ 46.445] (II) NOUVEAU driver Date: Fri Jul 6 16:23:50 2012 +1000
[ 46.445] (II) NOUVEAU driver for NVIDIA chipset families :
[ 46.445] RIVA TNT (NV04)
[ 46.445] RIVA TNT2 (NV05)
[ 46.445] GeForce 256 (NV10)
[ 46.445] GeForce 2 (NV11, NV15)
[ 46.446] GeForce 4MX (NV17, NV18)
[ 46.446] GeForce 3 (NV20)
[ 46.446] GeForce 4Ti (NV25, NV28)
[ 46.446] GeForce FX (NV3x)
[ 46.446] GeForce 6 (NV4x)
[ 46.446] GeForce 7 (G7x)
[ 46.446] GeForce 8 (G8x)
[ 46.446] GeForce GTX 200 (NVA0)
[ 46.447] GeForce GTX 400 (NVC0)
[ 46.447] (--) using VT number 4
[ 46.452] drmOpenDevice: node name is /dev/dri/card0
[ 46.452] drmOpenDevice: open result is 8, (OK)
[ 46.452] drmOpenByBusid: Searching for BusID pci:0000:00:05.0
[ 46.452] drmOpenDevice: node name is /dev/dri/card0
[ 46.452] drmOpenDevice: open result is 8, (OK)
[ 46.452] drmOpenByBusid: drmOpenMinor returns 8
[ 46.452] drmOpenByBusid: drmGetBusid reports pci:0000:00:05.0
[ 46.452] (II) [drm] nouveau interface version: 1.1.0
[ 46.452] (II) Loading sub module "dri"
[ 46.452] (II) LoadModule: "dri"
[ 46.453] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 46.453] (II) Module dri: vendor="X.Org Foundation"
[ 46.453] compiled for 1.12.4, module version = 1.0.0
[ 46.453] ABI class: X.Org Server Extension, version 6.0
[ 46.453] (II) NOUVEAU(0): Loaded DRI module
[ 46.453] drmOpenDevice: node name is /dev/dri/card0
[ 46.453] drmOpenDevice: open result is 9, (OK)
[ 46.453] drmOpenDevice: node name is /dev/dri/card0
[ 46.453] drmOpenDevice: open result is 9, (OK)
[ 46.453] drmOpenByBusid: Searching for BusID pci:0000:00:05.0
[ 46.453] drmOpenDevice: node name is /dev/dri/card0
[ 46.453] drmOpenDevice: open result is 9, (OK)
[ 46.453] drmOpenByBusid: drmOpenMinor returns 9
[ 46.453] drmOpenByBusid: drmGetBusid reports pci:0000:00:05.0
[ 46.453] (II) [drm] DRM interface version 1.4
[ 46.454] (II) [drm] DRM open master succeeded.
[ 46.454] (--) NOUVEAU(0): Chipset: "NVIDIA NV4e"
[ 46.454] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 46.454] (==) NOUVEAU(0): RGB weight 888
[ 46.454] (==) NOUVEAU(0): Default visual is TrueColor
[ 46.454] (==) NOUVEAU(0): Using HW cursor
[ 46.454] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 46.454] (==) NOUVEAU(0): Page flipping enabled
[ 46.454] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 46.504] (II) NOUVEAU(0): Output VGA-1 using monitor section Generic Monitor
[ 46.547] (II) NOUVEAU(0): EDID for output VGA-1
[ 46.547] (II) NOUVEAU(0): Manufacturer: HSD Model: 1940 Serial#: 6696
[ 46.547] (II) NOUVEAU(0): Year: 2006 Week: 13
[ 46.547] (II) NOUVEAU(0): EDID Version: 1.3
[ 46.547] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 46.547] (II) NOUVEAU(0): Sync: Separate SyncOnGreen
[ 46.547] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 46.547] (II) NOUVEAU(0): Gamma: 2.20
[ 46.547] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 46.547] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 46.547] (II) NOUVEAU(0): redX: 0.634 redY: 0.339 greenX: 0.285 greenY: 0.587
[ 46.547] (II) NOUVEAU(0): blueX: 0.144 blueY: 0.075 whiteX: 0.310 whiteY: 0.330
[ 46.547] (II) NOUVEAU(0): Supported established timings:
[ 46.548] (II) NOUVEAU(0): 720x400@70Hz
[ 46.548] (II) NOUVEAU(0): 640x480@60Hz
[ 46.548] (II) NOUVEAU(0): 640x480@72Hz
[ 46.548] (II) NOUVEAU(0): 640x480@75Hz
[ 46.548] (II) NOUVEAU(0): 800x600@56Hz
[ 46.548] (II) NOUVEAU(0): 800x600@60Hz
[ 46.548] (II) NOUVEAU(0): 800x600@72Hz
[ 46.548] (II) NOUVEAU(0): 800x600@75Hz
[ 46.548] (II) NOUVEAU(0): 1024x768@60Hz
[ 46.548] (II) NOUVEAU(0): 1024x768@70Hz
[ 46.548] (II) NOUVEAU(0): 1024x768@75Hz
[ 46.548] (II) NOUVEAU(0): 1280x1024@75Hz
[ 46.548] (II) NOUVEAU(0): 1152x864@75Hz
[ 46.548] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 46.548] (II) NOUVEAU(0): Supported standard timings:
[ 46.548] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 46.548] (II) NOUVEAU(0): #1: hsize: 640 vsize 400 refresh: 70 vid: 2609
[ 46.548] (II) NOUVEAU(0): #2: hsize: 640 vsize 360 refresh: 70 vid: 51761
[ 46.548] (II) NOUVEAU(0): #3: hsize: 1024 vsize 768 refresh: 72 vid: 19553
[ 46.548] (II) NOUVEAU(0): Supported detailed timing:
[ 46.548] (II) NOUVEAU(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 46.548] (II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 46.548] (II) NOUVEAU(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 46.548] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 145 MHz
[ 46.548] (II) NOUVEAU(0): Serial No:
[ 46.548] (II) NOUVEAU(0): Monitor name: HC194D
[ 46.549] (II) NOUVEAU(0): EDID (in hex):
[ 46.549] (II) NOUVEAU(0): 00ffffffffffff0022644019281a0000
[ 46.549] (II) NOUVEAU(0): 0d1001030a261e78ea71d6a256499624
[ 46.549] (II) NOUVEAU(0): 134f54afcf808180310a31ca614c0000
[ 46.549] (II) NOUVEAU(0): 000000000000302a009851002a403070
[ 46.549] (II) NOUVEAU(0): 1300782d1100001e000000fd00384b1f
[ 46.549] (II) NOUVEAU(0): 510e000a202020202020000000ff0020
[ 46.549] (II) NOUVEAU(0): 202020202020202020202020000000fc
[ 46.549] (II) NOUVEAU(0): 004843313934440a202020202020006c
[ 46.549] (II) NOUVEAU(0): EDID vendor "HSD", prod id 6464
[ 46.559] (II) NOUVEAU(0): Using hsync ranges from config file
[ 46.559] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 46.560] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 46.560] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 46.560] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 46.560] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 46.560] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 46.560] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 46.560] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 46.560] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 46.560] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 46.560] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 46.560] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 46.560] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 46.560] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 46.560] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 46.560] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 46.560] (II) NOUVEAU(0): Modeline "640x400"x70.0 23.35 640 656 720 800 400 401 404 417 -hsync +vsync (29.2 kHz e)
[ 46.560] (II) NOUVEAU(0): Modeline "640x360"x70.0 20.58 640 648 712 784 360 361 364 375 -hsync +vsync (26.2 kHz e)
[ 46.560] (II) NOUVEAU(0): Modeline "1024x768"x72.0 78.43 1024 1080 1192 1360 768 769 772 801 -hsync +vsync (57.7 kHz e)
[ 46.561] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 46.561] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz UeP)
[ 46.561] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 46.561] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 46.561] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 46.561] (II) NOUVEAU(0): Modeline "1024x768"x72.0 78.44 1024 1080 1192 1360 768 769 772 801 -hsync +vsync (57.7 kHz)
[ 46.561] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 46.561] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 46.561] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 46.561] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 46.561] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 46.561] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 46.561] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 46.561] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 46.561] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 46.561] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 46.561] (II) NOUVEAU(0): Output VGA-1 connected
[ 46.561] (II) NOUVEAU(0): Using user preference for initial modes
[ 46.561] (II) NOUVEAU(0): Output VGA-1 using initial mode 1280x1024
[ 46.561] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 46.561] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0)
[ 46.561] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 46.562] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz UeP)
[ 46.562] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 46.562] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 46.562] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 46.562] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 46.562] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 46.562] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 46.562] (**) NOUVEAU(0): Mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
[ 46.562] (II) NOUVEAU(0): Modeline "1024x768"x72.0 78.44 1024 1080 1192 1360 768 769 772 801 -hsync +vsync (57.7 kHz)
[ 46.562] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 46.562] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 46.562] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 46.562] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 46.562] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 46.562] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 46.562] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 46.562] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 46.562] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 46.562] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 46.562] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 46.562] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 46.562] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 46.562] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 46.563] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 46.563] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 46.563] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 46.563] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 46.563] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 46.563] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 46.563] (**) NOUVEAU(0): Display dimensions: (380, 300) mm
[ 46.563] (**) NOUVEAU(0): DPI set to (85, 86)
[ 46.563] (II) Loading sub module "fb"
[ 46.563] (II) LoadModule: "fb"
[ 46.563] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 46.590] (II) Module fb: vendor="X.Org Foundation"
[ 46.590] compiled for 1.12.4, module version = 1.0.0
[ 46.590] ABI class: X.Org ANSI C Emulation, version 0.4
[ 46.590] (II) Loading sub module "exa"
[ 46.590] (II) LoadModule: "exa"
[ 46.591] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 46.601] (II) Module exa: vendor="X.Org Foundation"
[ 46.601] compiled for 1.12.4, module version = 2.5.0
[ 46.601] ABI class: X.Org Video Driver, version 12.1
[ 46.601] (II) Loading sub module "shadowfb"
[ 46.601] (II) LoadModule: "shadowfb"
[ 46.601] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 46.607] (II) Module shadowfb: vendor="X.Org Foundation"
[ 46.607] compiled for 1.12.4, module version = 1.0.0
[ 46.607] ABI class: X.Org ANSI C Emulation, version 0.4
[ 46.607] (--) Depth 24 pixmap format is 32 bpp
[ 46.608] (II) NOUVEAU(0): Opened GPU channel 0
[ 46.611] (II) NOUVEAU(0): [DRI2] Setup complete
[ 46.611] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 46.611] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 46.634] (II) EXA(0): Driver allocated offscreen pixmaps
[ 46.634] (II) EXA(0): Driver registered support for the following operations:
[ 46.634] (II) Solid
[ 46.634] (II) Copy
[ 46.634] (II) Composite (RENDER acceleration)
[ 46.634] (II) UploadToScreen
[ 46.634] (II) DownloadFromScreen
[ 46.634] (==) NOUVEAU(0): Backing store disabled
[ 46.634] (==) NOUVEAU(0): Silken mouse enabled
[ 46.634] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[ 46.634] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 46.634] (**) NOUVEAU(0): DPMS enabled
[ 46.634] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 46.635] (--) RandR disabled
[ 46.635] (II) Initializing built-in extension Generic Event Extension
[ 46.635] (II) Initializing built-in extension SHAPE
[ 46.635] (II) Initializing built-in extension MIT-SHM
[ 46.635] (II) Initializing built-in extension XInputExtension
[ 46.635] (II) Initializing built-in extension XTEST
[ 46.635] (II) Initializing built-in extension BIG-REQUESTS
[ 46.635] (II) Initializing built-in extension SYNC
[ 46.635] (II) Initializing built-in extension XKEYBOARD
[ 46.635] (II) Initializing built-in extension XC-MISC
[ 46.635] (II) Initializing built-in extension SECURITY
[ 46.635] (II) Initializing built-in extension XINERAMA
[ 46.635] (II) Initializing built-in extension XFIXES
[ 46.635] (II) Initializing built-in extension RENDER
[ 46.635] (II) Initializing built-in extension RANDR
[ 46.635] (II) Initializing built-in extension COMPOSITE
[ 46.635] (II) Initializing built-in extension DAMAGE
[ 46.635] (II) SELinux: Disabled on system
[ 47.032] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 47.032] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 47.033] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 47.033] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 47.034] (II) AIGLX: Loaded and initialized nouveau
[ 47.034] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 47.042] (II) NOUVEAU(0): NVEnterVT is called.
[ 47.063] (II) NOUVEAU(0): Setting screen physical size to 338 x 270
[ 47.063] resize called 1280 1024
[ 47.484] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 47.484] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 47.484] (II) LoadModule: "evdev"
[ 47.484] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 47.513] (II) Module evdev: vendor="X.Org Foundation"
[ 47.513] compiled for 1.12.1, module version = 2.7.0
[ 47.513] Module class: X.Org XInput Driver
[ 47.513] ABI class: X.Org XInput driver, version 16.0
[ 47.513] (II) Using input driver 'evdev' for 'Power Button'
[ 47.513] (**) Power Button: always reports core events
[ 47.513] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 47.513] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 47.513] (--) evdev: Power Button: Found keys
[ 47.513] (II) evdev: Power Button: Configuring as keyboard
[ 47.513] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 47.513] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 47.513] (**) Option "xkb_rules" "evdev"
[ 47.513] (**) Option "xkb_model" "pc105"
[ 47.513] (**) Option "xkb_layout" "es"
[ 47.513] (**) Option "xkb_options" "lv3:ralt_switch"
[ 47.593] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 47.593] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 47.593] (II) Using input driver 'evdev' for 'Power Button'
[ 47.593] (**) Power Button: always reports core events
[ 47.593] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 47.593] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 47.594] (--) evdev: Power Button: Found keys
[ 47.594] (II) evdev: Power Button: Configuring as keyboard
[ 47.594] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 47.594] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 47.594] (**) Option "xkb_rules" "evdev"
[ 47.594] (**) Option "xkb_model" "pc105"
[ 47.594] (**) Option "xkb_layout" "es"
[ 47.594] (**) Option "xkb_options" "lv3:ralt_switch"
[ 47.595] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[ 47.595] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 47.595] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 47.596] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 47.596] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[ 47.596] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc03d
[ 47.596] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
[ 47.596] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 47.596] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 47.596] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 47.596] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 47.596] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 47.596] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 47.596] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 47.596] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:0b.0/usb1/1-3/1-3:1.0/input/input1/event1"
[ 47.596] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
[ 47.596] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 47.597] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 47.597] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 47.597] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 47.597] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 47.598] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 47.598] (II) No input driver specified, ignoring this device.
[ 47.598] (II) This device may have been added with another device file.
[ 47.598] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 47.598] (II) No input driver specified, ignoring this device.
[ 47.598] (II) This device may have been added with another device file.
[ 47.599] (II) config/udev: Adding input device HDA NVidia Line Out Side (/dev/input/event10)
[ 47.599] (II) No input driver specified, ignoring this device.
[ 47.599] (II) This device may have been added with another device file.
[ 47.600] (II) config/udev: Adding input device HDA NVidia Line Out CLFE (/dev/input/event11)
[ 47.600] (II) No input driver specified, ignoring this device.
[ 47.600] (II) This device may have been added with another device file.
[ 47.601] (II) config/udev: Adding input device HDA NVidia Line Out Surround (/dev/input/event12)
[ 47.601] (II) No input driver specified, ignoring this device.
[ 47.601] (II) This device may have been added with another device file.
[ 47.601] (II) config/udev: Adding input device HDA NVidia Line Out Front (/dev/input/event13)
[ 47.601] (II) No input driver specified, ignoring this device.
[ 47.601] (II) This device may have been added with another device file.
[ 47.602] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event6)
[ 47.602] (II) No input driver specified, ignoring this device.
[ 47.602] (II) This device may have been added with another device file.
[ 47.603] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event7)
[ 47.603] (II) No input driver specified, ignoring this device.
[ 47.603] (II) This device may have been added with another device file.
[ 47.604] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event8)
[ 47.604] (II) No input driver specified, ignoring this device.
[ 47.604] (II) This device may have been added with another device file.
[ 47.604] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event9)
[ 47.604] (II) No input driver specified, ignoring this device.
[ 47.604] (II) This device may have been added with another device file.
[ 47.605] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 47.605] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 47.605] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 47.605] (**) AT Translated Set 2 keyboard: always reports core events
[ 47.605] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 47.605] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 47.605] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 47.606] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 47.606] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 47.606] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 47.606] (**) Option "xkb_rules" "evdev"
[ 47.606] (**) Option "xkb_model" "pc105"
[ 47.606] (**) Option "xkb_layout" "es"
[ 47.606] (**) Option "xkb_options" "lv3:ralt_switch"
[ 47.607] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 47.607] (II) No input driver specified, ignoring this device.
[ 47.607] (II) This device may have been added with another device file.
[ 1797.804]
[ 1797.804] Backtrace:
[ 1797.821] 0: /usr/bin/X (xorg_backtrace+0x36) [0x7f4f94752d06]
[ 1797.821] 1: /usr/bin/X (0x7f4f945d4000+0x182859) [0x7f4f94756859]
[ 1797.821] 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f4f938fa000+0xf210) [0x7f4f93909210]
[ 1797.822] 3: /lib/x86_64-linux-gnu/libc.so.6 (0x7f4f92564000+0x8cdc8) [0x7f4f925f0dc8]
[ 1797.822] 4: /lib/x86_64-linux-gnu/libc.so.6 (0x7f4f92564000+0x86bf5) [0x7f4f925eabf5]
[ 1797.822] 5: /usr/lib/xorg/modules/libexa.so (0x7f4f8facc000+0x590e) [0x7f4f8fad190e]
[ 1797.822] 6: /usr/lib/xorg/modules/libexa.so (0x7f4f8facc000+0x5d1b) [0x7f4f8fad1d1b]
[ 1797.822] 7: /usr/lib/xorg/modules/libexa.so (0x7f4f8facc000+0x81fa) [0x7f4f8fad41fa]
[ 1797.822] 8: /usr/lib/xorg/modules/libexa.so (0x7f4f8facc000+0x120ae) [0x7f4f8fade0ae]
[ 1797.822] 9: /usr/lib/xorg/modules/libexa.so (0x7f4f8facc000+0xe9b8) [0x7f4f8fada9b8]
[ 1797.822] 10: /usr/bin/X (0x7f4f945d4000+0x110a79) [0x7f4f946e4a79]
[ 1797.822] 11: /usr/lib/xorg/modules/libexa.so (0x7f4f8facc000+0xfa7f) [0x7f4f8fadba7f]
[ 1797.822] 12: /usr/bin/X (0x7f4f945d4000+0x10a5ab) [0x7f4f946de5ab]
[ 1797.823] 13: /usr/bin/X (0x7f4f945d4000+0x52e61) [0x7f4f94626e61]
[ 1797.823] 14: /usr/bin/X (0x7f4f945d4000+0x41ec5) [0x7f4f94615ec5]
[ 1797.823] 15: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xf5) [0x7f4f92585a55]
[ 1797.823] 16: /usr/bin/X (0x7f4f945d4000+0x4219d) [0x7f4f9461619d]
[ 1797.823]
[ 1797.823] Segmentation fault at address (nil)
[ 1797.823]
Fatal server error:
[ 1797.823] Caught signal 11 (Segmentation fault). Server aborting
[ 1797.823]
[ 1797.823]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 1797.823] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 1797.823]
[ 1797.826] (II) evdev: Power Button: Close
[ 1797.826] (II) UnloadModule: "evdev"
[ 1797.826] (II) evdev: Power Button: Close
[ 1797.827] (II) UnloadModule: "evdev"
[ 1797.829] (II) evdev: Logitech USB-PS/2 Optical Mouse: Close
[ 1797.829] (II) UnloadModule: "evdev"
[ 1797.830] (II) evdev: AT Translated Set 2 keyboard: Close
[ 1797.830] (II) UnloadModule: "evdev"
[ 1797.831] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1797.831] (II) NOUVEAU(0): NVLeaveVT is called.
[ 1797.860] Server terminated with error (1). Closing log file.
