Package: installation-reports INSTALL REPORT
Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/sid_d-i/sparc/20050206/sarge-sparc-netinst.iso uname -a: Linux junker 2.4.27-1-sparc64 #1 Mon Aug 23 23:59:55 PDT 2004 sparc64 GNU/Linux Date: 2005-02-06 22:00 Method: netinst cd Machine: sun ultra 5 Processor: ultrasparc IIi 270 Mhz Memory: 64MB * Root Device: IDE Root Size/partition table: 4GB /dev/hda2 3861068 169344 3495592 5% / tmpfs 30456 0 30456 0% /dev/shm /dev/hda1 91650 9170 77590 11% /boot junker:~# lspci 0000:00:00.0 Host bridge: Sun Microsystems Computer Corp. Ultra IIi 0000:00:01.0 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 11) 0000:00:01.1 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 11) 0000:01:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01) 0000:01:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01) 0000:01:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] (rev 9a) 0000:01:03.0 IDE interface: Silicon Image, Inc. (formerly CMD Technology Inc) PCI0646 (rev 03) junker:~# lspci -n 0000:00:00.0 0600: 108e:a000 0000:00:01.0 0604: 108e:5000 (rev 11) 0000:00:01.1 0604: 108e:5000 (rev 11) 0000:01:01.0 0680: 108e:1000 (rev 01) 0000:01:01.1 0200: 108e:1001 (rev 01) 0000:01:02.0 0300: 1002:4754 (rev 9a) 0000:01:03.0 0101: 1095:0646 (rev 03) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Same system as the just-reported failure except half the ram removed. framebuffer appears defective on this system. After install, the system works fine with the ram reinstalled. -- Blars Blarson [EMAIL PROTECTED] http://www.blars.org/blars.html With Microsoft, failure is not an option. It is a standard feature. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
