Package: installation-reports Severity: normal Boot method: network Image version: http://ftp.de.debian.org/debian/dists/wheezy/main/installer-armhf/current/images/mx5/netboot/efikamx/uI{mage,nitrd} Date: 2013-05-03
Machine: Freescale i.MX53 LOCO Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [ ] Load installer modules: [O] Clock/timezone setup: [O] User/password setup: [O] Detect hard drives: [O] Partition hard drives: [E?] Install base system: [O] Install tasks: [O] Install boot loader: [ ] Overall install: [O] Comments/Problems: * I booted the efika kernel+initrd on my Loco board. I had to overwrite the uImage's load address because the i.MX53 on the Loco doesn't have RAM at 0x90000000. * I didn't test it (because I don't have physical access to the system) but I think the automatic installation would have overwritten the boot loader. But I admit it's hard to detect where the bootloader is. * With the original uInitrd the installer fails to select a kernel to install. The patch for http://bugs.debian.org/706643 fixes that though. * Again with the original uInitrd one of the last dialogs tells: You will need to boot manually with the kernel on partition /dev/mmcblk1p1 and root=/dev/mmcblk1p2 passed as a kernel argument. This is wrong, because there was no kernel installed. * I installed via a serial connection (on ttymxc0). It would have been nice if the installed system had a getty running on that serial line. Other than that I'm very satisfied with the overall installation. Thanks Uwe -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to sub...@bugs.debian.org. ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="7.0 (wheezy) - installer build 20130503-20:47" X_INSTALLATION_MEDIUM=netboot ============================================== Installer hardware-summary: ============================================== uname -a: Linux debian 3.2.0-4-mx5 #1 Debian 3.2.41-2 armv7l GNU/Linux lspci -knn: pcilib: Cannot open /proc/bus/pci lspci -knn: lspci: Cannot find any working access method. lsmod: Module Size Used by lsmod: dm_mod 63191 0 lsmod: md_mod 92216 0 lsmod: jfs 151629 0 lsmod: ext4 376919 2 lsmod: crc16 1113 1 ext4 lsmod: jbd2 66483 1 ext4 lsmod: ext3 162865 0 lsmod: jbd 58577 1 ext3 lsmod: btrfs 704681 0 lsmod: crc32c 2534 1 lsmod: libcrc32c 896 1 btrfs lsmod: zlib_deflate 18517 1 btrfs lsmod: vfat 8521 0 lsmod: fat 42736 1 vfat lsmod: ext2 54616 1 lsmod: mbcache 4440 3 ext2,ext3,ext4 lsmod: usb_storage 34333 0 lsmod: mmc_block 15280 5 lsmod: sdhci_esdhc_imx 4988 0 lsmod: sdhci_pltfm 2170 1 sdhci_esdhc_imx lsmod: sdhci 24379 2 sdhci_pltfm,sdhci_esdhc_imx lsmod: ahci_platform 1604 0 lsmod: libahci 17312 1 ahci_platform lsmod: libata 132233 2 libahci,ahci_platform lsmod: mmc_core 79196 2 sdhci,mmc_block lsmod: scsi_mod 149567 2 libata,usb_storage df: Filesystem 1K-blocks Used Available Use% Mounted on df: none 103568 36 103532 0% /run df: tmpfs 517824 0 517824 0% /dev df: /dev/mmcblk1p2 2208328 521428 1574724 25% /target df: /dev/mmcblk1p1 233191 5280 215470 2% /target/boot df: /dev/mmcblk1p6 5063712 220640 4585844 5% /target/home df: /dev/mmcblk1p2 2208328 521428 1574724 25% /dev/.static/dev df: tmpfs 517824 0 517824 0% /target/dev free: total used free shared buffers free: Mem: 1035652 611148 424504 0 61628 free: -/+ buffers: 549520 486132 free: Swap: 238588 0 238588 /proc/cmdline: console=ttymxc0,115200 root=/dev/ram0 /proc/cpuinfo: Processor : ARMv7 Processor rev 5 (v7l) /proc/cpuinfo: BogoMIPS : 996.14 /proc/cpuinfo: Features : swp half thumb fastmult vfp edsp neon vfpv3 tls /proc/cpuinfo: CPU implementer : 0x41 /proc/cpuinfo: CPU architecture: 7 /proc/cpuinfo: CPU variant : 0x2 /proc/cpuinfo: CPU part : 0xc08 /proc/cpuinfo: CPU revision : 5 /proc/cpuinfo: /proc/cpuinfo: Hardware : Freescale MX53 LOCO Board /proc/cpuinfo: Revision : 53021 /proc/cpuinfo: Serial : 0000000000000000 /proc/iomem: 10000000-10000fff : imx53-ahci.0 /proc/iomem: 50004000-50007fff : sdhci-esdhc-imx53.0 /proc/iomem: 50004000-50007fff : mmc0 /proc/iomem: 50020000-50023fff : sdhci-esdhc-imx53.2 /proc/iomem: 50020000-50023fff : mmc1 /proc/iomem: 53f84000-53f87fff : imx31-gpio.0 /proc/iomem: 53f84000-53f87fff : imx31-gpio /proc/iomem: 53f88000-53f8bfff : imx31-gpio.1 /proc/iomem: 53f88000-53f8bfff : imx31-gpio /proc/iomem: 53f8c000-53f8ffff : imx31-gpio.2 /proc/iomem: 53f8c000-53f8ffff : imx31-gpio /proc/iomem: 53f90000-53f93fff : imx31-gpio.3 /proc/iomem: 53f90000-53f93fff : imx31-gpio /proc/iomem: 53f98000-53f9bfff : imx2-wdt.0 /proc/iomem: 53f98000-53f9bfff : imx2-wdt.0 /proc/iomem: 53fbc000-53fbcfff : imx21-uart.0 /proc/iomem: 53fbc000-53fbcfff : imx-uart /proc/iomem: 53fdc000-53fdffff : imx31-gpio.4 /proc/iomem: 53fdc000-53fdffff : imx31-gpio /proc/iomem: 53fe0000-53fe3fff : imx31-gpio.5 /proc/iomem: 53fe0000-53fe3fff : imx31-gpio /proc/iomem: 53fe4000-53fe7fff : imx31-gpio.6 /proc/iomem: 53fe4000-53fe7fff : imx31-gpio /proc/iomem: 63fb0000-63fb3fff : imx35-sdma /proc/iomem: 63fb0000-63fb3fff : imx35-sdma /proc/iomem: 63fc4000-63fc4fff : imx-i2c.1 /proc/iomem: 63fc8000-63fc8fff : imx-i2c.0 /proc/iomem: 63fec000-63fecfff : imx25-fec.0 /proc/iomem: 63fec000-63fecfff : imx25-fec /proc/iomem: 70000000-8fffffff : System RAM /proc/iomem: 70008000-7038ad73 : Kernel text /proc/iomem: 703ac000-7044c4cb : Kernel data /proc/iomem: b0000000-cfffffff : System RAM /proc/interrupts: CPU0 /proc/interrupts: 1: 1879 tzic mmc0 /proc/interrupts: 3: 5530894 tzic mmc1 /proc/interrupts: 6: 0 tzic sdma /proc/interrupts: 28: 0 tzic ahci /proc/interrupts: 31: 5945 tzic IMX-uart /proc/interrupts: 39: 100265 tzic i.MX Timer Tick /proc/interrupts: 87: 159807 tzic imx25-fec /proc/interrupts: 203: 0 gpio-mxc mmc1 /proc/interrupts: 205: 0 gpio-mxc mmc0 /proc/interrupts: Err: 0 /proc/meminfo: MemTotal: 1035652 kB /proc/meminfo: MemFree: 424504 kB /proc/meminfo: Buffers: 61628 kB /proc/meminfo: Cached: 483580 kB /proc/meminfo: SwapCached: 0 kB /proc/meminfo: Active: 209008 kB /proc/meminfo: Inactive: 352100 kB /proc/meminfo: Active(anon): 15924 kB /proc/meminfo: Inactive(anon): 4 kB /proc/meminfo: Active(file): 193084 kB /proc/meminfo: Inactive(file): 352096 kB /proc/meminfo: Unevictable: 0 kB /proc/meminfo: Mlocked: 0 kB /proc/meminfo: HighTotal: 524288 kB /proc/meminfo: HighFree: 180932 kB /proc/meminfo: LowTotal: 511364 kB /proc/meminfo: LowFree: 243572 kB /proc/meminfo: SwapTotal: 238588 kB /proc/meminfo: SwapFree: 238588 kB /proc/meminfo: Dirty: 792 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: AnonPages: 15916 kB /proc/meminfo: Mapped: 1608 kB /proc/meminfo: Shmem: 36 kB /proc/meminfo: Slab: 39664 kB /proc/meminfo: SReclaimable: 36508 kB /proc/meminfo: SUnreclaim: 3156 kB /proc/meminfo: KernelStack: 432 kB /proc/meminfo: PageTables: 348 kB /proc/meminfo: NFS_Unstable: 0 kB /proc/meminfo: Bounce: 0 kB /proc/meminfo: WritebackTmp: 0 kB /proc/meminfo: CommitLimit: 756412 kB /proc/meminfo: Committed_AS: 20952 kB /proc/meminfo: VmallocTotal: 319488 kB /proc/meminfo: VmallocUsed: 5028 kB /proc/meminfo: VmallocChunk: 310784 kB -- System Information: Debian Release: 7.0 APT prefers testing APT policy: (500, 'testing') Architecture: armhf (armv7l) Kernel: Linux 3.2.0-4-mx5 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
