On 2013-04-01 03:40:14 +0200, Vincent Lefevre wrote: > On 2013-03-30 13:07:49 +0000, Dominic Hargreaves wrote: > > cpan -i BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz > > > > works fine the first time for me, so I think this must be something > > specific to your setup. > > I'll try again with Debian's CPAN.pm next week. There might also be > a difference due to the fact that an explicit version is given.
I still have the problem with Debian's CPAN.pm: xvii:~> env | grep PERL PERL_LOCAL_LIB_ROOT=/home/vinc17/perl5 PERL_MB_OPT=--install_base /home/vinc17/perl5 PERL_MM_OPT=INSTALL_BASE=/home/vinc17/perl5 PERL_LWP_SSL_CA_PATH=/home/vinc17/wd/config/cacert PERL5LIB=/home/vinc17/lib/site_perl:/home/vinc17/perl5/lib/perl5 xvii:~> rm -rf .cpan perl5 xvii:~> mkdir -p .cpan/CPAN xvii:~> cp ~/wd/config/txt-apps/MyConfig.pm .cpan/CPAN/ xvii:~> mkdir -p perl5/bin xvii:~> cpan -i BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz Fetching with LWP: http://ftp.easynet.be/pub/CPAN/authors/01mailrc.txt.gz Going to read '/home/vinc17/.cpan/sources/authors/01mailrc.txt.gz' ............................................................................DONE Fetching with LWP: http://ftp.easynet.be/pub/CPAN/modules/02packages.details.txt.gz Going to read '/home/vinc17/.cpan/sources/modules/02packages.details.txt.gz' Database was generated on Mon, 15 Apr 2013 02:53:03 GMT .............. New CPAN.pm version (v2.00) available. [Currently running version is v1.960001] You might want to try install CPAN reload cpan to both upgrade CPAN.pm and run the new version without leaving the current session. ..............................................................DONE Fetching with LWP: http://ftp.easynet.be/pub/CPAN/modules/03modlist.data.gz Going to read '/home/vinc17/.cpan/sources/modules/03modlist.data.gz' ............................................................................DONE Going to write /home/vinc17/.cpan/Metadata Running make for B/BU/BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz Fetching with LWP: http://ftp.easynet.be/pub/CPAN/authors/id/B/BU/BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz Fetching with LWP: http://ftp.easynet.be/pub/CPAN/authors/id/B/BU/BURAK/CHECKSUMS Checksum for /home/vinc17/.cpan/sources/authors/id/B/BU/BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz ok CPAN.pm: Going to build B/BU/BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz Checking prerequisites... requires: ! Sys::Info::Base is not installed ! Unix::Processors is not installed build_requires: ! Test::Sys::Info is not installed ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions of the modules indicated above before proceeding with this installation Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Sys-Info-Driver-Linux' version '0.7900' ---- Unsatisfied dependencies detected during ---- ---- BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz ---- Test::Sys::Info [build_requires] Unix::Processors [requires] Sys::Info::Base [requires] Running Build test Delayed until after prerequisites Running Build install Delayed until after prerequisites Running install for module 'Test::Sys::Info' Running make for B/BU/BURAK/Test-Sys-Info-0.20.tar.gz Fetching with LWP: http://ftp.easynet.be/pub/CPAN/authors/id/B/BU/BURAK/Test-Sys-Info-0.20.tar.gz Checksum for /home/vinc17/.cpan/sources/authors/id/B/BU/BURAK/Test-Sys-Info-0.20.tar.gz ok CPAN.pm: Going to build B/BU/BURAK/Test-Sys-Info-0.20.tar.gz Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Test-Sys-Info' version '0.20' Building Test-Sys-Info BURAK/Test-Sys-Info-0.20.tar.gz ./Build -- OK 'YAML' not installed, will not store persistent state Running Build test t/03-basic.t .......... ok t/201-pod.t ........... skipped: Errors detected: Test::Pod is required for testing POD t/202-pod-coverage.t .. skipped: Test::Pod::Coverage required for testing pod coverage All tests successful. Files=3, Tests=1, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.06 cusr 0.02 csys = 0.11 CPU) Result: PASS BURAK/Test-Sys-Info-0.20.tar.gz ./Build test -- OK Running Build install Building Test-Sys-Info Installing /home/vinc17/perl5/lib/perl5/Test/Sys/Info.pm Installing /home/vinc17/perl5/lib/perl5/Test/Sys/Info/Driver.pm Installing /home/vinc17/perl5/man/man3/Test::Sys::Info::Driver.3pm Installing /home/vinc17/perl5/man/man3/Test::Sys::Info.3pm BURAK/Test-Sys-Info-0.20.tar.gz ./Build install -- OK Running install for module 'Unix::Processors' Running make for W/WS/WSNYDER/Unix-Processors-2.042.tar.gz Fetching with LWP: http://ftp.easynet.be/pub/CPAN/authors/id/W/WS/WSNYDER/Unix-Processors-2.042.tar.gz Fetching with LWP: http://ftp.easynet.be/pub/CPAN/authors/id/W/WS/WSNYDER/CHECKSUMS Checksum for /home/vinc17/.cpan/sources/authors/id/W/WS/WSNYDER/Unix-Processors-2.042.tar.gz ok CPAN.pm: Going to build W/WS/WSNYDER/Unix-Processors-2.042.tar.gz Checking if your kit is complete... Looks good Writing Makefile for Unix::Processors Writing MYMETA.yml /usr/bin/perl /usr/share/perl/5.14/ExtUtils/xsubpp -typemap /usr/share/perl/5.14/ExtUtils/typemap -typemap typemap Processors.xs > Processors.xsc && mv Processors.xsc Processors.c cp Processors.pm blib/lib/Unix/Processors.pm cp Processors/Info.pm blib/lib/Unix/Processors/Info.pm Running Mkbootstrap for Unix::Processors () chmod 644 Processors.bs cp Processors.bs blib/arch/auto/Unix/Processors/Processors.bs chmod 644 blib/arch/auto/Unix/Processors/Processors.bs cc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fstack-protector -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -DVERSION=\"2.042\" -DXS_VERSION=\"2.042\" -fPIC "-I/usr/lib/perl/5.14/CORE" Processors.c rm -f blib/arch/auto/Unix/Processors/Processors.so cc -shared -L/usr/local/lib -fstack-protector Processors.o -o blib/arch/auto/Unix/Processors/Processors.so \ \ chmod 755 blib/arch/auto/Unix/Processors/Processors.so Manifying blib/man3/Unix::Processors.3pm Manifying blib/man3/Unix::Processors::Info.3pm WSNYDER/Unix-Processors-2.042.tar.gz /usr/bin/make -j2 -j2 -- OK Running make test PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00_pod.t ....... ok t/01_manifest.t .. ok t/20_test.t ...... ok All tests successful. Files=3, Tests=11, 0 wallclock secs ( 0.03 usr 0.00 sys + 0.05 cusr 0.01 csys = 0.09 CPU) Result: PASS WSNYDER/Unix-Processors-2.042.tar.gz /usr/bin/make test -- OK Running make install Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /home/vinc17/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/auto/Unix/Processors/Processors.bs Installing /home/vinc17/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/auto/Unix/Processors/Processors.so Installing /home/vinc17/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Unix/Processors.pm Installing /home/vinc17/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Unix/Processors/Info.pm Installing /home/vinc17/perl5/man/man3/Unix::Processors.3pm Installing /home/vinc17/perl5/man/man3/Unix::Processors::Info.3pm Appending installation info to /home/vinc17/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/perllocal.pod WSNYDER/Unix-Processors-2.042.tar.gz /usr/bin/make install -- OK Running install for module 'Sys::Info::Base' Running make for B/BU/BURAK/Sys-Info-Base-0.7802.tar.gz Fetching with LWP: http://ftp.easynet.be/pub/CPAN/authors/id/B/BU/BURAK/Sys-Info-Base-0.7802.tar.gz Checksum for /home/vinc17/.cpan/sources/authors/id/B/BU/BURAK/Sys-Info-Base-0.7802.tar.gz ok CPAN.pm: Going to build B/BU/BURAK/Sys-Info-Base-0.7802.tar.gz Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Sys-Info-Base' version '0.7802' Building Sys-Info-Base BURAK/Sys-Info-Base-0.7802.tar.gz ./Build -- OK Running Build test t/03-basic.t .......... ok t/201-pod.t ........... skipped: Errors detected: Test::Pod is required for testing POD t/202-pod-coverage.t .. skipped: Test::Pod::Coverage required for testing pod coverage All tests successful. Files=3, Tests=8, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.10 cusr 0.02 csys = 0.16 CPU) Result: PASS BURAK/Sys-Info-Base-0.7802.tar.gz ./Build test -- OK Running Build install Building Sys-Info-Base Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Base.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Driver.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Constants.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Device.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/OS.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Device/CPU.pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Device::CPU.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Constants.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Driver.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Device.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::OS.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Base.3pm BURAK/Sys-Info-Base-0.7802.tar.gz ./Build install -- OK Running Build for B/BU/BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz Has already been unwrapped into directory /home/vinc17/.cpan/build/Sys-Info-Driver-Linux-0.7900-dKeZXu CPAN.pm: Going to build B/BU/BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz Warning: Prerequisite 'Unix::Processors => 0' for 'BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz' already built but the result looks suspicious. Skipping another build attempt, to prevent looping endlessly. Building Sys-Info-Driver-Linux BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz ./Build -- OK Running Build test UNAME: Linux xvii 3.8-trunk-amd64 #1 SMP Debian 3.8-1~experimental.1 x86_64 GNU/Linux t/03-basic.t .......... ok t/201-pod.t ........... skipped: Errors detected: Test::Pod is required for testing POD t/202-pod-coverage.t .. skipped: Test::Pod::Coverage required for testing pod coverage All tests successful. Files=3, Tests=66, 1 wallclock secs ( 0.03 usr 0.01 sys + 0.13 cusr 0.02 csys = 0.19 CPU) Result: PASS BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz Tests succeeded but one dependency not OK (Unix::Processors) BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz [dependencies] -- NA Running Build install make test had returned bad status, won't install without force xvii:~> cpan -i BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz Going to read '/home/vinc17/.cpan/Metadata' Database was generated on Mon, 15 Apr 2013 02:53:03 GMT Running make for B/BU/BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz Checksum for /home/vinc17/.cpan/sources/authors/id/B/BU/BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz ok CPAN.pm: Going to build B/BU/BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Sys-Info-Driver-Linux' version '0.7900' Building Sys-Info-Driver-Linux BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz ./Build -- OK 'YAML' not installed, will not store persistent state Running Build test UNAME: Linux xvii 3.8-trunk-amd64 #1 SMP Debian 3.8-1~experimental.1 x86_64 GNU/Linux t/03-basic.t .......... ok t/201-pod.t ........... skipped: Errors detected: Test::Pod is required for testing POD t/202-pod-coverage.t .. skipped: Test::Pod::Coverage required for testing pod coverage All tests successful. Files=3, Tests=66, 0 wallclock secs ( 0.01 usr 0.02 sys + 0.14 cusr 0.02 csys = 0.19 CPU) Result: PASS BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz ./Build test -- OK Running Build install Building Sys-Info-Driver-Linux Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Driver/Linux.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Driver/Linux/Constants.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Driver/Linux/Device.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Driver/Linux/OS.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Driver/Linux/Device/CPU.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Driver/Linux/OS/Distribution.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Driver/Linux/OS/Distribution/Conf.pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Driver::Linux::OS::Distribution::Conf.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Driver::Linux.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Driver::Linux::Device::CPU.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Driver::Linux::Constants.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Driver::Linux::OS::Distribution.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Driver::Linux::OS.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Driver::Linux::Device.3pm BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz ./Build install -- OK However, by installing the new CPAN.pm versiob first: xvii:~> rm -rf .cpan perl5 xvii:~> mkdir -p .cpan/CPAN xvii:~> cp ~/wd/config/txt-apps/MyConfig.pm .cpan/CPAN/ xvii:~> mkdir -p perl5/bin xvii:~> cpan -i CPAN [...] ANDK/CPAN-2.00.tar.gz /usr/bin/make install -- OK xvii:~> cpan -i BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz Reading '/home/vinc17/.cpan/Metadata' Database was generated on Mon, 15 Apr 2013 02:53:03 GMT Running make for B/BU/BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz Fetching with LWP: http://ftp.easynet.be/pub/CPAN/authors/id/B/BU/BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz Fetching with LWP: http://ftp.easynet.be/pub/CPAN/authors/id/B/BU/BURAK/CHECKSUMS Checksum for /home/vinc17/.cpan/sources/authors/id/B/BU/BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz ok CPAN.pm: Building B/BU/BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz Checking prerequisites... requires: ! Sys::Info::Base is not installed ! Unix::Processors is not installed build_requires: ! Test::Sys::Info is not installed ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions of the modules indicated above before proceeding with this installation Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Sys-Info-Driver-Linux' version '0.7900' ---- Unsatisfied dependencies detected during ---- ---- BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz ---- Test::Sys::Info [build_requires] Unix::Processors [requires] Sys::Info::Base [requires] Running Build test Delayed until after prerequisites Running Build install Delayed until after prerequisites Running install for module 'Test::Sys::Info' Running make for B/BU/BURAK/Test-Sys-Info-0.20.tar.gz Fetching with LWP: http://ftp.easynet.be/pub/CPAN/authors/id/B/BU/BURAK/Test-Sys-Info-0.20.tar.gz Checksum for /home/vinc17/.cpan/sources/authors/id/B/BU/BURAK/Test-Sys-Info-0.20.tar.gz ok CPAN.pm: Building B/BU/BURAK/Test-Sys-Info-0.20.tar.gz Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Test-Sys-Info' version '0.20' Building Test-Sys-Info BURAK/Test-Sys-Info-0.20.tar.gz ./Build -- OK 'YAML' not installed, will not store persistent state Running Build test t/03-basic.t .......... ok t/201-pod.t ........... skipped: Errors detected: Test::Pod is required for testing POD t/202-pod-coverage.t .. skipped: Test::Pod::Coverage required for testing pod coverage All tests successful. Files=3, Tests=1, 1 wallclock secs ( 0.02 usr 0.00 sys + 0.07 cusr 0.02 csys = 0.11 CPU) Result: PASS BURAK/Test-Sys-Info-0.20.tar.gz ./Build test -- OK Running Build install Building Test-Sys-Info Installing /home/vinc17/perl5/lib/perl5/Test/Sys/Info.pm Installing /home/vinc17/perl5/lib/perl5/Test/Sys/Info/Driver.pm Installing /home/vinc17/perl5/man/man3/Test::Sys::Info::Driver.3pm Installing /home/vinc17/perl5/man/man3/Test::Sys::Info.3pm BURAK/Test-Sys-Info-0.20.tar.gz ./Build install -- OK Running install for module 'Unix::Processors' Running make for W/WS/WSNYDER/Unix-Processors-2.042.tar.gz Fetching with LWP: http://ftp.easynet.be/pub/CPAN/authors/id/W/WS/WSNYDER/Unix-Processors-2.042.tar.gz Fetching with LWP: http://ftp.easynet.be/pub/CPAN/authors/id/W/WS/WSNYDER/CHECKSUMS Checksum for /home/vinc17/.cpan/sources/authors/id/W/WS/WSNYDER/Unix-Processors-2.042.tar.gz ok CPAN.pm: Building W/WS/WSNYDER/Unix-Processors-2.042.tar.gz Checking if your kit is complete... Looks good Writing Makefile for Unix::Processors Writing MYMETA.yml /usr/bin/perl /usr/share/perl/5.14/ExtUtils/xsubpp -typemap /usr/share/perl/5.14/ExtUtils/typemap -typemap typemap Processors.xs > Processors.xsc && mv Processors.xsc Processors.c cp Processors.pm blib/lib/Unix/Processors.pm cp Processors/Info.pm blib/lib/Unix/Processors/Info.pm Running Mkbootstrap for Unix::Processors () chmod 644 Processors.bs cp Processors.bs blib/arch/auto/Unix/Processors/Processors.bs chmod 644 blib/arch/auto/Unix/Processors/Processors.bs cc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fstack-protector -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -DVERSION=\"2.042\" -DXS_VERSION=\"2.042\" -fPIC "-I/usr/lib/perl/5.14/CORE" Processors.c rm -f blib/arch/auto/Unix/Processors/Processors.so cc -shared -L/usr/local/lib -fstack-protector Processors.o -o blib/arch/auto/Unix/Processors/Processors.so \ \ chmod 755 blib/arch/auto/Unix/Processors/Processors.so Manifying blib/man3/Unix::Processors.3pm Manifying blib/man3/Unix::Processors::Info.3pm WSNYDER/Unix-Processors-2.042.tar.gz /usr/bin/make -j2 -j2 -- OK Running make test PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00_pod.t ....... ok t/01_manifest.t .. ok t/20_test.t ...... ok All tests successful. Files=3, Tests=11, 0 wallclock secs ( 0.03 usr 0.00 sys + 0.04 cusr 0.02 csys = 0.09 CPU) Result: PASS WSNYDER/Unix-Processors-2.042.tar.gz /usr/bin/make test -- OK Running make install Manifying blib/man3/Unix::Processors.3pm Manifying blib/man3/Unix::Processors::Info.3pm Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /home/vinc17/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/auto/Unix/Processors/Processors.bs Installing /home/vinc17/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/auto/Unix/Processors/Processors.so Installing /home/vinc17/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Unix/Processors.pm Installing /home/vinc17/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/Unix/Processors/Info.pm Installing /home/vinc17/perl5/man/man3/Unix::Processors.3pm Installing /home/vinc17/perl5/man/man3/Unix::Processors::Info.3pm Appending installation info to /home/vinc17/perl5/lib/perl5/x86_64-linux-gnu-thread-multi/perllocal.pod WSNYDER/Unix-Processors-2.042.tar.gz /usr/bin/make install -- OK Running install for module 'Sys::Info::Base' Running make for B/BU/BURAK/Sys-Info-Base-0.7802.tar.gz Fetching with LWP: http://ftp.easynet.be/pub/CPAN/authors/id/B/BU/BURAK/Sys-Info-Base-0.7802.tar.gz Checksum for /home/vinc17/.cpan/sources/authors/id/B/BU/BURAK/Sys-Info-Base-0.7802.tar.gz ok CPAN.pm: Building B/BU/BURAK/Sys-Info-Base-0.7802.tar.gz Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Sys-Info-Base' version '0.7802' Building Sys-Info-Base BURAK/Sys-Info-Base-0.7802.tar.gz ./Build -- OK Running Build test t/03-basic.t .......... ok t/201-pod.t ........... skipped: Errors detected: Test::Pod is required for testing POD t/202-pod-coverage.t .. skipped: Test::Pod::Coverage required for testing pod coverage All tests successful. Files=3, Tests=8, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.10 cusr 0.01 csys = 0.14 CPU) Result: PASS BURAK/Sys-Info-Base-0.7802.tar.gz ./Build test -- OK Running Build install Building Sys-Info-Base Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Base.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Driver.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Constants.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Device.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/OS.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Device/CPU.pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Device::CPU.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Constants.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Driver.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Device.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::OS.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Base.3pm BURAK/Sys-Info-Base-0.7802.tar.gz ./Build install -- OK Running Build for B/BU/BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz Has already been unwrapped into directory /home/vinc17/.cpan/build/Sys-Info-Driver-Linux-0.7900-ESvFBn CPAN.pm: Building B/BU/BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz Building Sys-Info-Driver-Linux BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz ./Build -- OK Running Build test UNAME: Linux xvii 3.8-trunk-amd64 #1 SMP Debian 3.8-1~experimental.1 x86_64 GNU/Linux t/03-basic.t .......... ok t/201-pod.t ........... skipped: Errors detected: Test::Pod is required for testing POD t/202-pod-coverage.t .. skipped: Test::Pod::Coverage required for testing pod coverage All tests successful. Files=3, Tests=66, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.13 cusr 0.03 csys = 0.19 CPU) Result: PASS BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz ./Build test -- OK Running Build install Building Sys-Info-Driver-Linux Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Driver/Linux.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Driver/Linux/Constants.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Driver/Linux/Device.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Driver/Linux/OS.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Driver/Linux/Device/CPU.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Driver/Linux/OS/Distribution.pm Installing /home/vinc17/perl5/lib/perl5/Sys/Info/Driver/Linux/OS/Distribution/Conf.pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Driver::Linux::OS::Distribution::Conf.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Driver::Linux.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Driver::Linux::Device::CPU.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Driver::Linux::Constants.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Driver::Linux::OS::Distribution.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Driver::Linux::OS.3pm Installing /home/vinc17/perl5/man/man3/Sys::Info::Driver::Linux::Device.3pm BURAK/Sys-Info-Driver-Linux-0.7900.tar.gz ./Build install -- OK -- Vincent Lefèvre <vinc...@vinc17.net> - Web: <http://www.vinc17.net/> 100% accessible validated (X)HTML - Blog: <http://www.vinc17.net/blog/> Work: CR INRIA - computer arithmetic / AriC project (LIP, ENS-Lyon) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
