Package: debian-installer
Hi,
when using d-i to install Debian on a system with RAID,
which we normally preconfigure on the second console in
the shell with a few commands, mdadm.conf is wrong.
We use something like this:
mdadm --create --level=1 -n 4 --spares=1 /dev/md0 /dev/sd{a,b,c,d,e}1
mdadm --create --level=10 -n 4 --spares=1 /dev/md1 /dev/sd{a,b,c,d,e}2
Then put LVM on md1 and use d-i to put /boot on md0
and the rest of the system on LVs.
The mdadm.conf d-i generates for us in the target,
with these settings, have “spares=1” for md0 and
“spares=2” for md1 for some unknown reason, which
makes the mdadm cronjob (rightfully) warn about
missing spares. Changing it to “spares=1” for md1
too using a text editor makes it succeed.
I think the mdadm.conf here is generated by d-i
somehow, as it’s put into the target, but feel
free to reassign this around.
This happens both with d-i from April 2012 and from
April 2013 (though I built the images I used myself
on a sid system from sid sources), so I thought I’d
better report this, in case there’s some mishandling
of systems with more than one md device (TTBOMK grub
doesn’t yet boot from RAID-10, does it?).
bye,
//mirabilos
--
tarent solutions GmbH
Rochusstraße 2-4, D-53123 Bonn • http://www.tarent.de/
Tel: +49 228 54881-393 • Fax: +49 228 54881-314
HRB 5168 (AG Bonn) • USt-ID (VAT): DE122264941
Geschäftsführer: Boris Esser, Sebastian Mancke
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
