-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
(CCing Geert Stappers and debian-sparc list)
Hi, the daily netboot D-I from stappers page seems work better than
previous images. This time it didn't freeze during ide-cd module but
the FB issue still persists.
Below the installation report:
Package: installation-reports
Debian-installer-version: http://people.debian.org/~stappers/d-i/
images/daily/sparc64/netboot/2.6/boot.img (2005-10-24)
Method: netboot
Machine: Sunblade 150
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O ]
Configure network HW: [O ]
Config network: [O ]
Detect CD: [O ]
Load installer modules: [O ]
Detect hard drives: [ O]
Partition hard drives: [ O]
Create file systems: [O ]
Mount partitions: [ O]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Just a question: how can I edit my own boot.img? I'm new to D-I and I
would like to customize a 2.6.12 kernel in order to fix the FB and
put it inside the image I used this time. Thanks in advance,
Ric
On Oct 23, 2005, at 4:50 AM, Riccardo Tortorici wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I tested Etch 2005-10-22 daily netboot (sunblade 150)
I got the same problems with FB (first char missed), D-I chars not
always readable and this time freezed during ide-cd module loading
do I wasn't able to install Etch once again. Should it be a 2.6.12
issue? With 2.6.8 worked...
[cut]
Package: installation-reports
Debian-installer-version: netboot sparc64 daily 2005-10-18 'http://
people.debian.org/~stappers/d-i/images/daily/sparc64/netboot/2.6/
boot.img'
uname -a: Linux Pain20051018 2.6.12-1-sparc64 #1 Tue Sep 27
23:45:57 UTC2005 sparc64 unknown
Date: 2005-10-19 12:33 AM
Method: network boot (boot net)
Machine: Sunblade 150
Processor:
Memory:
Root Device: IDE (hdc2)
Root Size/partition table: hdc1 /boot
hdc1 /
hdc4 swap
hdc5 /home
Output of lspci and lspci -n: unavailable
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [E]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
The D-I chars are often not readable (strange/not printable chars)
It gives an error message during installing base-system (The
debootstraap program exited with an error return value 1 - Check /
var/log/syslog or see virtual console for the details). I read
syslog and dmesg and "exiting on error base-installer/debootstraap-
failed"is what I found. Selecting "Continue" gives "Installation
step failed".
The 2.6.12 seems not gives you a good FB configuration (first char
cut off). With 2.6.8 netboot everything was OK. I'm looking for a
good 2.6.12 .config for frame buffer.
Many "cramfs: wrong magic" errors on dmesg.
- - Riccardo Tortorici -
Linux Registered User #365170
Count yourself @ http://counter.li.org/ !
- --
Encrypted Mail Welcomes
GPG key: 0xF3FCE306 available on wwwkeys.pgp.net
GPG key fingerprint = C1C4 CA17 5135 8F5C 94C2 3347 4A22 67DB F3FC E306
- --
no1984.org - Stop TCG!
- --
HTML email can be dangerous, is not always readable, wastes bandwidth
and is simply not necessary please don't send them to me!
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (Darwin)
iD8DBQFDXV02SiJn2/P84wYRAr1kAJ0X7OPaxGstt6YvJUwWs7smIN05qwCfd3CY
Up7BJ78rsvHtGnYGuQPv8/0=
=04Pg
-----END PGP SIGNATURE-----
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
