Package: src:linux
Version: 3.2.39-2
Severity: important
Dear Maintainer,
I think that the severity can be raised because it give you an
unusable system and data loss (all the data you don't have saved).
I have experienced some random system freeze: I can move only the
mouse cursors, the system is not responding, the keyboard led cannot
be switched on/off, I can't go to a terminal with Ctrl-Alt-F1, only
magic keys work and I can to the AltGr-Stamp-reisub to reboot my
system.
Only one time I have a system "responding", I don't have a gnome-shell
process and I cannot activate a new one (it cannot found an X server);
in Ctrl-F7 I can see only one program and iteract to it (I cannot
switch to another one), if I close it I see another one and I can
operate with it. This time I have had an error in the logs:
Mar 21 10:44:09 lideb2 kernel: [ 8125.550475]
[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU
hung
Mar 21 10:44:09 lideb2 kernel: [ 8125.550480] [drm] capturing error
event; look for more information in /debug/dri/0/i915_error_state
I have see that there are a lot of bug with this error for some intel
VGA controller, but I have found only old bug.
I'm using this system for about one year without a freeze.
I can completely solve the problem using the linux-image-3.2.0-3-amd64.
$ lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor
Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation
Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200
Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset
Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 2 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation H67 Express Chipset Family LPC
Controller (rev 05)
00:1f.2 RAID bus controller: Intel Corporation 82801 SATA Controller
[RAID mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family
SMBus Controller (rev 05)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
* What led up to the situation?
upgrading the linux-image from linux-image-3.2.0-3-amd64 to
linux-image-3.2.0-4-amd64
* What exactly did you do (or not do) that was effective (or
ineffective)?
I use it for work and I'm not doing nothing special. Principally I'm
using LibreOffice at freeze time.
* What was the outcome of this action?
the system freeze and I can only move the mouse or use the magic keys
to reboot the system.
* What outcome did you expect instead?
an usable system! ;-)
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-ker...@lists.debian.org) (gcc
version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.39-2
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64
root=UUID=97bbf21c-5e82-4108-9a56-7403591e29f9 ro quiet
** Tainted: IO (6144)
* Working around severe firmware bug.
* Out-of-tree module has been loaded.
** Kernel log:
[ 1.465649] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.465653] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.465932] hub 2-1:1.0: USB hub found
[ 1.466044] hub 2-1:1.0: 8 ports detected
[ 1.597031] Refined TSC clocksource calibration: 2594.107 MHz.
[ 1.597037] Switching to clocksource tsc
[ 1.736938] usb 2-1.7: new low-speed USB device number 3 using ehci_hcd
[ 1.802488] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x1b
[ 1.804250] platform microcode: firmware: agent loaded
intel-ucode/06-2a-07 into memory
[ 1.804791] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
[ 1.804834] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x1b
[ 1.806358] platform microcode: firmware: agent loaded
intel-ucode/06-2a-07 into memory
[ 1.806647] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
[ 1.806680] microcode: Microcode Update Driver: v2.00
<tig...@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.811012] device-mapper: uevent: version 1.0.3
[ 1.811128] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19)
initialised: dm-de...@redhat.com
[ 1.832207] usb 2-1.7: New USB device found, idVendor=0461, idProduct=4d64
[ 1.832212] usb 2-1.7: New USB device strings: Mfr=0, Product=2,
SerialNumber=0
[ 1.832215] usb 2-1.7: Product: USB Optical Mouse
[ 1.836872] input: USB Optical Mouse as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input0
[ 1.837034] generic-usb 0003:0461:4D64.0001: input,hidraw0: USB HID
v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.7/input0
[ 1.837047] usbcore: registered new interface driver usbhid
[ 1.837049] usbhid: USB HID core driver
[ 1.897003] PM: Starting manual resume from disk
[ 1.897006] PM: Hibernation image partition 8:18 present
[ 1.897007] PM: Looking for hibernation image.
[ 1.897171] PM: Image not found (code -22)
[ 1.897174] PM: Hibernation image not present or could not be loaded.
[ 1.904580] usb 2-1.8: new low-speed USB device number 4 using ehci_hcd
[ 1.956457] EXT4-fs (sdb3): mounted filesystem with ordered data
mode. Opts: (null)
[ 2.002300] usb 2-1.8: New USB device found, idVendor=046d, idProduct=c31c
[ 2.002305] usb 2-1.8: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.002308] usb 2-1.8: Product: USB Keyboard
[ 2.002310] usb 2-1.8: Manufacturer: Logitech
[ 2.007720] input: Logitech USB Keyboard as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input1
[ 2.007818] generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID
v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.8/input0
[ 2.015354] input: Logitech USB Keyboard as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/input/input2
[ 2.015450] generic-usb 0003:046D:C31C.0003: input,hidraw2: USB HID
v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.8/input1
[ 3.774770] udevd[348]: starting version 175
[ 4.382572] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 4.382578] ACPI: Power Button [PWRB]
[ 4.382622] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.382625] ACPI: Power Button [PWRF]
[ 4.516847] ACPI: Requesting acpi_cpufreq
[ 4.837713] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.951041] udevd[407]: renamed network interface eth0 to eth1
[ 5.243123] parport_pc 00:04: reported by Plug and Play ACPI
[ 5.243201] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE]
[ 5.256725] iTCO_vendor_support: vendor-support=0
[ 5.257220] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 5.257278] iTCO_wdt: Found a Cougar Point TCO device (Version=2,
TCOBASE=0x0460)
[ 5.257332] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.436700] [drm] Initialized drm 1.1.0 20060810
[ 5.525145] i915 0000:00:02.0: setting latency timer to 64
[ 5.556911] mtrr: type mismatch for c0000000,10000000 old:
write-back new: write-combining
[ 5.556913] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 5.557073] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 5.557077] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.557079] [drm] Driver supports precise vblank timestamp query.
[ 5.557109] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.592558] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 5.917590] fbcon: inteldrmfb (fb0) is primary device
[ 6.094615] Console: switching to colour frame buffer device 160x64
[ 6.101491] fb0: inteldrmfb frame buffer device
[ 6.101501] drm: registered panic notifier
[ 6.101525] No ACPI video bus found
[ 6.101561] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.102730] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 6.102762] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 6.180039] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 8.615295] Adding 7164k swap on /dev/sdb2. Priority:-1 extents:1
across:7164k
[ 8.630188] EXT4-fs (sdb3): re-mounted. Opts: (null)
[ 8.869812] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro
[ 9.216817] loop: module loaded
[ 9.768832] EXT4-fs (sdb1): mounted filesystem with ordered data
mode. Opts: (null)
[ 10.728358] RPC: Registered named UNIX socket transport module.
[ 10.728361] RPC: Registered udp transport module.
[ 10.728362] RPC: Registered tcp transport module.
[ 10.728364] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.810107] FS-Cache: Loaded
[ 10.858511] FS-Cache: Netfs 'nfs' registered for caching
[ 10.864117] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 12.666802] vboxdrv: Found 2 processor cores.
[ 12.666954] vboxdrv: fAsync=0 offMin=0x1a2 offMax=0xa72
[ 12.666996] vboxdrv: TSC mode is 'synchronous', kernel timer mode
is 'normal'.
[ 12.666998] vboxdrv: Successfully loaded version 4.1.18_Debian
(interface 0x00190000).
[ 13.104620] vboxpci: IOMMU not found (not registered)
[ 19.467860] r8169 0000:02:00.0: firmware: agent loaded
rtl_nic/rtl8168e-2.fw into memory
[ 19.610971] r8169 0000:02:00.0: eth1: link down
[ 19.610980] r8169 0000:02:00.0: eth1: link down
[ 19.611296] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 21.212474] r8169 0000:02:00.0: eth1: link up
[ 21.212829] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 23.508118] lp0: using parport0 (interrupt-driven).
[ 23.637266] ppdev: user-space parallel port driver
[ 32.235406] eth1: no IPv6 routers present
[ 36.789781] Ebtables v2.0 registered
[ 37.875321] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 38.897733] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 57.037923] postgres (3522): /proc/3522/oom_adj is deprecated,
please use /proc/3522/oom_score_adj instead.
** Model information
sys_vendor: Olidata S.p.A.
product_name: T4000 \ C4000
product_version: To be filled by O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: A4BO2S01
board_vendor: Foxconn
board_name: H67MP-S/-V/H67MP
board_version:
** Loaded modules:
cpufreq_userspace
cpufreq_conservative
cpufreq_stats
cpufreq_powersave
ip6table_filter
ip6_tables
iptable_filter
ip_tables
ebtable_nat
ebtables
x_tables
ppdev
lp
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
binfmt_misc
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
kvm_intel
kvm
joydev
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
snd_seq_midi
acpi_cpufreq
i915
snd_seq_midi_event
video
drm_kms_helper
drm
snd_rawmidi
mperf
i2c_algo_bit
snd_seq
iTCO_wdt
iTCO_vendor_support
parport_pc
parport
coretemp
i2c_i801
i2c_core
snd_seq_device
snd_timer
snd
psmouse
crc32c_intel
evdev
serio_raw
pcspkr
soundcore
ghash_clmulni_intel
cryptd
processor
thermal_sys
button
ext4
crc16
jbd2
mbcache
usbhid
hid
dm_mod
microcode
sr_mod
sg
sd_mod
cdrom
crc_t10dif
ahci
libahci
ehci_hcd
r8169
mii
libata
usbcore
scsi_mod
usb_common
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 1000
link/ether 00:0f:20:c9:09:b9 brd ff:ff:ff:ff:ff:ff
inet 10.192.4.133/23 brd 10.192.5.255 scope global eth1
inet6 fe80::20f:20ff:fec9:9b9/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed
multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1363570 2067 0 0 0 0 0 0
1363570 2067 0 0 0 0 0 0
eth1: 869245 9611 0 0 0 0 0 0
11970 100 0 0 0 0 0 0
*** Protocol statistics:
Ip:
8155 total packets received
8 with invalid addresses
0 forwarded
0 incoming packets discarded
7861 incoming packets delivered
2137 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
9 active connections openings
5 passive connection openings
3 failed connection attempts
0 connection resets received
6 connections established
1839 segments received
1840 segments send out
0 segments retransmited
0 bad segments received.
3 resets sent
Udp:
285 packets received
0 packets to unknown port received.
0 packet receive errors
301 packets sent
UdpLite:
TcpExt:
3 TCP sockets finished time wait in fast timer
31 delayed acks sent
1374 packets directly queued to recvmsg prequeue.
939757 bytes directly received in process context from prequeue
341 packet headers predicted
1308 packets header predicted and directly queued to user
12 acknowledgments not containing data payload received
1653 predicted acknowledgments
IpExt:
InMcastPkts: 13
OutMcastPkts: 17
InBcastPkts: 5744
OutBcastPkts: 14
InOctets: 1938061
OutOctets: 1370113
InMcastOctets: 3410
OutMcastOctets: 3570
InBcastOctets: 551146
OutBcastOctets: 656
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core
Processor Family DRAM Controller [8086:0100] (rev 09)
Subsystem: Foxconn International, Inc. Device [105b:0dcd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd
Generation Core Processor Family Integrated Graphics Controller
[8086:0102] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Foxconn International, Inc. Device [105b:0dcd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fe000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6
Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev
04)
Subsystem: Foxconn International, Inc. Device [105b:0dcd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fe408000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series
Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05)
(prog-if 20 [EHCI])
Subsystem: Foxconn International, Inc. Device [105b:0dcd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe407000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series
Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: Foxconn International, Inc. Device [105b:0dcd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series
Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series
Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series
Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
(prog-if 20 [EHCI])
Subsystem: Foxconn International, Inc. Device [105b:0dcd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe406000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation H67 Express Chipset
Family LPC Controller [8086:1c4a] (rev 05)
Subsystem: Foxconn International, Inc. Device [105b:0dcd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 SATA
Controller [RAID mode] [8086:2822] (rev 05)
Subsystem: Foxconn International, Inc. Device [105b:0dcd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at fe405000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset
Family SMBus Controller [8086:1c22] (rev 05)
Subsystem: Foxconn International, Inc. Device [105b:0dcd]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe404000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev
06)
Subsystem: Foxconn International, Inc. Device [105b:0dcd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at d0004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 003: ID 0461:4d64 Primax Electronics, Ltd
Bus 002 Device 004: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=it_IT.utf8, LC_CTYPE=it_IT.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.36+wheezy.1
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36+wheezy.1
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
