Package: linux-2.6 Version: 2.6.32-48squeeze1 Severity: important Tags: squeeze
Hello, With squeeze default kernel 2.6.32-48squeeze1, my quad port i350 ethernet card is showing duplicate MAC addresses. This is not the case with squeeze-backport kernel 3.2.0-0.bpo.4-amd64 (3.2.35-2~bpo60+1) whith 2.6.32-48squeeze1 : # uname -a Linux tomtom 2.6.32-5-amd64 #1 SMP Mon Feb 25 00:26:11 UTC 2013 x86_64 GNU/Linux # modinfo igb version: 3.0.6-k2 # dmesg |grep eth [ 3.364316] igb 0000:01:00.0: eth0: (PCIe:5.0Gb/s:Width x4) bc:30:5b:f4:2d:78 [ 3.364605] igb 0000:01:00.0: eth0: PBA No: G10565-011 [ 3.452281] igb 0000:01:00.1: eth1: (PCIe:5.0Gb/s:Width x4) bc:30:5b:f4:2d:78 [ 3.452570] igb 0000:01:00.1: eth1: PBA No: G10565-011 [ 3.532262] igb 0000:01:00.2: eth2: (PCIe:5.0Gb/s:Width x4) bc:30:5b:f4:2d:79 [ 3.532551] igb 0000:01:00.2: eth2: PBA No: G10565-011 [ 3.612270] igb 0000:01:00.3: eth3: (PCIe:5.0Gb/s:Width x4) bc:30:5b:f4:2d:78 [ 3.612559] igb 0000:01:00.3: eth3: PBA No: G10565-011 whith 3.2.35-2~bpo60+1 : # uname -a Linux tomtom 3.2.0-0.bpo.4-amd64 #1 SMP Debian 3.2.35-2~bpo60+1 x86_64 GNU/Linux # modinfo igb version: 3.2.10-k # dmesg | grep eth [ 3.785560] igb 0000:01:00.0: eth0: (PCIe:5.0Gb/s:Width x4) bc:30:5b:f4:2d:78 [ 3.785851] igb 0000:01:00.0: eth0: PBA No: G10565-011 [ 3.882341] igb 0000:01:00.1: eth1: (PCIe:5.0Gb/s:Width x4) bc:30:5b:f4:2d:79 [ 3.882632] igb 0000:01:00.1: eth1: PBA No: G10565-011 [ 3.961575] igb 0000:01:00.2: eth2: (PCIe:5.0Gb/s:Width x4) bc:30:5b:f4:2d:7a [ 3.961866] igb 0000:01:00.2: eth2: PBA No: G10565-011 [ 4.053582] igb 0000:01:00.3: eth3: (PCIe:5.0Gb/s:Width x4) bc:30:5b:f4:2d:7b [ 4.053873] igb 0000:01:00.3: eth3: PBA No: G10565-011 See also: http://bugs.debian.org/cgi-bin/bugreport.cgi?msg=47;bug=627702 The following report has been captured with kernel 3.2.35 running. ask me if you need the same with a 2.6 kernel. Regards, Joseph. -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information sys_vendor: Dell Inc. product_name: PowerEdge R720 product_version: chassis_vendor: Dell Inc. chassis_version: bios_vendor: Dell Inc. bios_version: 1.3.6 board_vendor: Dell Inc. board_name: 0VWT90 board_version: A02 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Sandy Bridge DMI2 [8086:3c00] (rev 07) Subsystem: Dell Device [1028:048c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation Sandy Bridge IIO PCI Express Root Port 1a [8086:3c02] (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-0000ffff Memory behind bridge: dc000000-dcffffff Prefetchable memory behind bridge: 00000000d9000000-00000000d91fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:02.0 PCI bridge [0604]: Intel Corporation Sandy Bridge IIO PCI Express Root Port 2a [8086:3c04] (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:02.2 PCI bridge [0604]: Intel Corporation Sandy Bridge IIO PCI Express Root Port 2c [8086:3c06] (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: dd000000-ddffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:03.0 PCI bridge [0604]: Intel Corporation Sandy Bridge IIO PCI Express Root Port 3a in PCI Express Mode [8086:3c08] (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:05.0 System peripheral [0880]: Intel Corporation Sandy Bridge Address Map, VTd_Misc, System Management [8086:3c28] (rev 07) Subsystem: Dell Device [1028:048c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:05.2 System peripheral [0880]: Intel Corporation Sandy Bridge Control Status and Global Errors [8086:3c2a] (rev 07) Subsystem: Dell Device [1028:048c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:11.0 PCI bridge [0604]: Intel Corporation Patsburg PCI Express Virtual Root Port [8086:1d3e] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:16.0 Communication controller [0780]: Intel Corporation Patsburg HECI Controller #1 [8086:1d3a] (rev 05) Subsystem: Dell Device [1028:048c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Region 0: Memory at df8fb000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:16.1 Communication controller [0780]: Intel Corporation Patsburg HECI Controller #2 [8086:1d3b] (rev 05) Subsystem: Dell Device [1028:048c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at df8fc000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:1a.0 USB Controller [0c03]: Intel Corporation Patsburg USB2 Enhanced Host Controller #2 [8086:1d2d] (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:048c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at df8fd000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1c.0 PCI bridge [0604]: Intel Corporation Patsburg PCI Express Root Port 1 [8086:1d10] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.7 PCI bridge [0604]: Intel Corporation Patsburg PCI Express Root Port 8 [8086:1d1e] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=07, subordinate=0b, sec-latency=0 Memory behind bridge: de000000-df7fffff Prefetchable memory behind bridge: 00000000d8000000-00000000d8ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation Patsburg USB2 Enhanced Host Controller #1 [8086:1d26] (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:048c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 22 Region 0: Memory at df8fe000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a5) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation Patsburg LPC Controller [8086:1d41] (rev 05) Subsystem: Dell Device [1028:048c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation Patsburg 6-Port SATA AHCI Controller [8086:1d02] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device [1028:048c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 151 Region 0: I/O ports at dce8 [size=8] Region 1: I/O ports at dcf8 [size=4] Region 2: I/O ports at dcf0 [size=8] Region 3: I/O ports at dcfc [size=4] Region 4: I/O ports at dcc0 [size=32] Region 5: Memory at df8ff000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 01:00.0 Ethernet controller [0200]: Intel Corporation Device [8086:1521] (rev 01) Subsystem: Dell Device [1028:1f60] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 38 Region 0: Memory at dcb00000 (32-bit, non-prefetchable) [size=1M] Region 2: I/O ports at fc80 [size=32] Region 3: Memory at dcff0000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at dc000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: igb 01:00.1 Ethernet controller [0200]: Intel Corporation Device [8086:1521] (rev 01) Subsystem: Dell Device [1028:1f60] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 37 Region 0: Memory at dcc00000 (32-bit, non-prefetchable) [size=1M] Region 2: I/O ports at fca0 [size=32] Region 3: Memory at dcff4000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at d9000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: igb 01:00.2 Ethernet controller [0200]: Intel Corporation Device [8086:1521] (rev 01) Subsystem: Dell Device [1028:1f60] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 36 Region 0: Memory at dcd00000 (32-bit, non-prefetchable) [size=1M] Region 2: I/O ports at fcc0 [size=32] Region 3: Memory at dcff8000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at d9080000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: igb 01:00.3 Ethernet controller [0200]: Intel Corporation Device [8086:1521] (rev 01) Subsystem: Dell Device [1028:1f60] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 34 Region 0: Memory at dce00000 (32-bit, non-prefetchable) [size=1M] Region 2: I/O ports at fce0 [size=32] Region 3: Memory at dcffc000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at d9100000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: igb 02:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID SAS TB [1000:005b] (rev 01) Subsystem: Dell PERC H710 Mini (for monolithics) [1028:1f34] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 42 Region 0: I/O ports at ec00 [size=256] Region 1: Memory at ddffc000 (64-bit, non-prefetchable) [size=16K] Region 3: Memory at ddf80000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at dd000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: megaraid_sas 07:00.0 PCI bridge [0604]: Renesas Technology Corp. SH7757 PCIe Switch [PS] [1912:0013] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes BIST result: 00 Bus: primary=07, secondary=08, subordinate=0b, sec-latency=0 Memory behind bridge: de000000-df7fffff Prefetchable memory behind bridge: 00000000d8000000-00000000d8ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 08:00.0 PCI bridge [0604]: Renesas Technology Corp. SH7757 PCIe Switch [PS] [1912:0013] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes BIST result: 00 Bus: primary=08, secondary=09, subordinate=0a, sec-latency=0 Memory behind bridge: de000000-deffffff Prefetchable memory behind bridge: 00000000d8000000-00000000d8ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 08:01.0 PCI bridge [0604]: Renesas Technology Corp. SH7757 PCIe Switch [PS] [1912:0013] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes BIST result: 00 Bus: primary=08, secondary=0b, subordinate=0b, sec-latency=0 Memory behind bridge: df700000-df7fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 09:00.0 PCI bridge [0604]: Renesas Technology Corp. SH7757 PCIe-PCI Bridge [PPB] [1912:0012] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes BIST result: 00 Bus: primary=09, secondary=0a, subordinate=0a, sec-latency=0 Memory behind bridge: de000000-deffffff Prefetchable memory behind bridge: 00000000d8000000-00000000d8ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0a:00.0 VGA compatible controller [0300]: Matrox Graphics, Inc. G200eR2 [102b:0534] (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:048c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (4000ns min, 8000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at d8000000 (32-bit, prefetchable) [size=16M] Region 1: Memory at deffc000 (32-bit, non-prefetchable) [size=16K] Region 2: Memory at de000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> 3f:08.0 System peripheral [0880]: Intel Corporation Sandy Bridge QPI Link 0 [8086:3c80] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:09.0 System peripheral [0880]: Intel Corporation Sandy Bridge QPI Link 1 [8086:3c90] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:0a.0 System peripheral [0880]: Intel Corporation Sandy Bridge Power Control Unit 0 [8086:3cc0] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:0a.1 System peripheral [0880]: Intel Corporation Sandy Bridge Power Control Unit 1 [8086:3cc1] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:0a.2 System peripheral [0880]: Intel Corporation Sandy Bridge Power Control Unit 2 [8086:3cc2] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:0a.3 System peripheral [0880]: Intel Corporation Sandy Bridge Power Control Unit 3 [8086:3cd0] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:0b.0 System peripheral [0880]: Intel Corporation Sandy Bridge Interrupt Control Registers [8086:3ce0] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:0b.3 System peripheral [0880]: Intel Corporation Sandy Bridge Semaphore and Scratchpad Configuration Registers [8086:3ce3] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:0c.0 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast Register 0 [8086:3ce8] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:0c.1 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast Register 0 [8086:3ce8] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:0c.2 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast Register 0 [8086:3ce8] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:0c.6 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller System Address Decoder 0 [8086:3cf4] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:0c.7 System peripheral [0880]: Intel Corporation Sandy Bridge System Address Decoder [8086:3cf6] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:0d.0 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast Register 0 [8086:3ce8] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:0d.1 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast Register 0 [8086:3ce8] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:0d.2 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast Register 0 [8086:3ce8] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:0d.6 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller System Address Decoder 1 [8086:3cf5] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:0e.0 System peripheral [0880]: Intel Corporation Sandy Bridge Processor Home Agent [8086:3ca0] (rev 07) Subsystem: Dell Device [1028:048c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:0e.1 Performance counters [1101]: Intel Corporation Sandy Bridge Processor Home Agent Performance Monitoring [8086:3c46] (rev 07) Subsystem: Dell Device [1028:048c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:0f.0 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller Registers [8086:3ca8] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 3f:0f.1 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller RAS Registers [8086:3c71] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 3f:0f.2 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller Target Address Decoder 0 [8086:3caa] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 3f:0f.3 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller Target Address Decoder 1 [8086:3cab] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 3f:0f.4 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller Target Address Decoder 2 [8086:3cac] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 3f:0f.5 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller Target Address Decoder 3 [8086:3cad] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 3f:0f.6 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller Target Address Decoder 4 [8086:3cae] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:10.0 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller Channel 0-3 Thermal Control 0 [8086:3cb0] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 3f:10.1 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller Channel 0-3 Thermal Control 1 [8086:3cb1] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 3f:10.2 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller ERROR Registers 0 [8086:3cb2] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 3f:10.3 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller ERROR Registers 1 [8086:3cb3] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 3f:10.4 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller Channel 0-3 Thermal Control 2 [8086:3cb4] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 3f:10.5 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller Channel 0-3 Thermal Control 3 [8086:3cb5] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 3f:10.6 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller ERROR Registers 2 [8086:3cb6] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 3f:10.7 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller ERROR Registers 3 [8086:3cb7] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 3f:11.0 System peripheral [0880]: Intel Corporation Sandy Bridge DDRIO [8086:3cb8] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:13.0 System peripheral [0880]: Intel Corporation Sandy Bridge R2PCIe [8086:3ce4] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:13.1 Performance counters [1101]: Intel Corporation Sandy Bridge Ring to PCI Express Performance Monitor [8086:3c43] (rev 07) Subsystem: Dell Device [1028:048c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:13.4 Performance counters [1101]: Intel Corporation Sandy Bridge QuickPath Interconnect Agent Ring Registers [8086:3ce6] (rev 07) Subsystem: Dell Device [1028:048c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:13.5 Performance counters [1101]: Intel Corporation Sandy Bridge Ring to QuickPath Interconnect Link 0 Performance Monitor [8086:3c44] (rev 07) Subsystem: Dell Device [1028:048c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 3f:13.6 System peripheral [0880]: Intel Corporation Sandy Bridge Ring to QuickPath Interconnect Link 1 Performance Monitor [8086:3c45] (rev 07) Subsystem: Dell Device [1028:048c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 40:01.0 PCI bridge [0604]: Intel Corporation Sandy Bridge IIO PCI Express Root Port 1a [8086:3c02] (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=40, secondary=41, subordinate=41, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 40:02.0 PCI bridge [0604]: Intel Corporation Sandy Bridge IIO PCI Express Root Port 2a [8086:3c04] (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=40, secondary=42, subordinate=42, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 40:03.0 PCI bridge [0604]: Intel Corporation Sandy Bridge IIO PCI Express Root Port 3a in PCI Express Mode [8086:3c08] (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=40, secondary=43, subordinate=43, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 40:03.2 PCI bridge [0604]: Intel Corporation Sandy Bridge IIO PCI Express Root Port 3c [8086:3c0a] (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=40, secondary=44, subordinate=44, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 40:05.0 System peripheral [0880]: Intel Corporation Sandy Bridge Address Map, VTd_Misc, System Management [8086:3c28] (rev 07) Subsystem: Dell Device [1028:048c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 40:05.2 System peripheral [0880]: Intel Corporation Sandy Bridge Control Status and Global Errors [8086:3c2a] (rev 07) Subsystem: Dell Device [1028:048c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 7f:08.0 System peripheral [0880]: Intel Corporation Sandy Bridge QPI Link 0 [8086:3c80] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:09.0 System peripheral [0880]: Intel Corporation Sandy Bridge QPI Link 1 [8086:3c90] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:0a.0 System peripheral [0880]: Intel Corporation Sandy Bridge Power Control Unit 0 [8086:3cc0] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:0a.1 System peripheral [0880]: Intel Corporation Sandy Bridge Power Control Unit 1 [8086:3cc1] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:0a.2 System peripheral [0880]: Intel Corporation Sandy Bridge Power Control Unit 2 [8086:3cc2] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:0a.3 System peripheral [0880]: Intel Corporation Sandy Bridge Power Control Unit 3 [8086:3cd0] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:0b.0 System peripheral [0880]: Intel Corporation Sandy Bridge Interrupt Control Registers [8086:3ce0] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:0b.3 System peripheral [0880]: Intel Corporation Sandy Bridge Semaphore and Scratchpad Configuration Registers [8086:3ce3] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:0c.0 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast Register 0 [8086:3ce8] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:0c.1 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast Register 0 [8086:3ce8] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:0c.2 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast Register 0 [8086:3ce8] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:0c.6 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller System Address Decoder 0 [8086:3cf4] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:0c.7 System peripheral [0880]: Intel Corporation Sandy Bridge System Address Decoder [8086:3cf6] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:0d.0 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast Register 0 [8086:3ce8] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:0d.1 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast Register 0 [8086:3ce8] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:0d.2 System peripheral [0880]: Intel Corporation Sandy Bridge Unicast Register 0 [8086:3ce8] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:0d.6 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller System Address Decoder 1 [8086:3cf5] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:0e.0 System peripheral [0880]: Intel Corporation Sandy Bridge Processor Home Agent [8086:3ca0] (rev 07) Subsystem: Dell Device [1028:048c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:0e.1 Performance counters [1101]: Intel Corporation Sandy Bridge Processor Home Agent Performance Monitoring [8086:3c46] (rev 07) Subsystem: Dell Device [1028:048c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:0f.0 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller Registers [8086:3ca8] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 7f:0f.1 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller RAS Registers [8086:3c71] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 7f:0f.2 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller Target Address Decoder 0 [8086:3caa] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 7f:0f.3 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller Target Address Decoder 1 [8086:3cab] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 7f:0f.4 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller Target Address Decoder 2 [8086:3cac] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 7f:0f.5 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller Target Address Decoder 3 [8086:3cad] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 7f:0f.6 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller Target Address Decoder 4 [8086:3cae] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:10.0 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller Channel 0-3 Thermal Control 0 [8086:3cb0] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 7f:10.1 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller Channel 0-3 Thermal Control 1 [8086:3cb1] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 7f:10.2 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller ERROR Registers 0 [8086:3cb2] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 7f:10.3 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller ERROR Registers 1 [8086:3cb3] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 7f:10.4 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller Channel 0-3 Thermal Control 2 [8086:3cb4] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 7f:10.5 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller Channel 0-3 Thermal Control 3 [8086:3cb5] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 7f:10.6 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller ERROR Registers 2 [8086:3cb6] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 7f:10.7 System peripheral [0880]: Intel Corporation Sandy Bridge Integrated Memory Controller ERROR Registers 3 [8086:3cb7] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 7f:11.0 System peripheral [0880]: Intel Corporation Sandy Bridge DDRIO [8086:3cb8] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:13.0 System peripheral [0880]: Intel Corporation Sandy Bridge R2PCIe [8086:3ce4] (rev 07) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:13.1 Performance counters [1101]: Intel Corporation Sandy Bridge Ring to PCI Express Performance Monitor [8086:3c43] (rev 07) Subsystem: Dell Device [1028:048c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:13.4 Performance counters [1101]: Intel Corporation Sandy Bridge QuickPath Interconnect Agent Ring Registers [8086:3ce6] (rev 07) Subsystem: Dell Device [1028:048c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:13.5 Performance counters [1101]: Intel Corporation Sandy Bridge Ring to QuickPath Interconnect Link 0 Performance Monitor [8086:3c44] (rev 07) Subsystem: Dell Device [1028:048c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 7f:13.6 System peripheral [0880]: Intel Corporation Sandy Bridge Ring to QuickPath Interconnect Link 1 Performance Monitor [8086:3c45] (rev 07) Subsystem: Dell Device [1028:048c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- ** USB devices: Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0624:0249 Avocent Corp. Bus 001 Device 003: ID 0624:0248 Avocent Corp. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0.7 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-0.bpo.4-amd64 (SMP w/24 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-amd64 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux-init 0.99~bpo60+1 tools for generating an initramfs ii linux-base 3.2~bpo60+1 Linux image base package ii module-init-tools 3.12-2 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-amd64 recommends: ii firmware-linux-free 2.6.32-48squeeze1 Binary firmware for various driver Versions of packages linux-image-2.6.32-5-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information excluded -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
