Package: src:linux Version: 3.2.39-2 Severity: important Dear Maintainer,
After apt-get dist-upgrade'ing to (wheezy) kernel 3.2.0-4, My monitor got blurry in X, due to it running at 1600x1200, rather than it's native 1680x1050. Why? X.org could no longer load the radeon driver, so fell back to VESA, per this Xorg.0.log snippet: [...] [ 39.355] (II) VESA: driver for VESA chipsets: vesa [ 39.355] (II) FBDEV: driver for framebuffer: fbdev [ 39.355] (++) using VT number 7 [ 39.364] (II) [KMS] drm report modesetting isn't supported. [ 39.364] (II) GPU only supported with KMS, using vesa instead. [ 39.364] (WW) Falling back to old probe method for fbdev [ 39.365] (II) Loading sub module "fbdevhw" [ 39.365] (II) LoadModule: "fbdevhw" [...] Complete Xorg.0.log is available at: http://pastebin.com/GURAvrAq I checked /etc/modules.d, which (still) had the radeon.modeset=1. Tried stuffing a radeon.modeset=1 at the end for the GRUB command line, no difference. Checked kernel settings for the radeon module and modesetting, they looked correct (sorry, I Google'd it, found 'em, checked 'em, didn't make notes). Just guessing it's the kernel; I'm a diletante. Workaround is to fall back to (Wheezy) 3.2.0-3. Please let me know how I can help. - Larry. -- Package-specific info: ** Version: Linux version 3.2.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-12) ) #1 SMP Debian 3.2.32-1 ** Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=UUID=4ce7310d-f580-4afb-b79b-4ec32a63a1af ro quiet ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 3.945338] PM: Image not found (code -22) [ 3.945342] PM: Hibernation image not present or could not be loaded. [ 3.988866] kjournald starting. Commit interval 5 seconds [ 3.989181] EXT3-fs (md2): mounted filesystem with ordered data mode [ 6.242755] udevd[486]: starting version 175 [ 6.870342] wmi: Mapper loaded [ 7.152766] udevd[561]: renamed network interface eth0 to eth3 [ 7.161876] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 7.161882] ACPI: Power Button [PWRB] [ 7.161944] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 7.161947] ACPI: Power Button [PWRF] [ 7.179842] ACPI: acpi_idle registered with cpuidle [ 7.278813] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 7.482334] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f] [ 7.482336] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.536681] EDAC MC: Ver: 2.1.0 [ 7.537416] MCE: In-kernel MCE decoding enabled. [ 7.599690] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 7.613558] AMD64 EDAC driver v3.4.0 [ 7.613611] EDAC amd64: DRAM ECC disabled. [ 7.613620] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 7.613621] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 7.613622] (Note that use of the override may cause unknown side effects.) [ 7.967538] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 7.967627] SP5100 TCO timer: mmio address 0xb8fe00 already in use [ 7.969536] powernow-k8: Found 1 AMD FX(tm)-6100 Six-Core Processor (6 cpu cores) (version 2.20.00) [ 7.969549] powernow-k8: Core Performance Boosting: on. [ 7.969610] powernow-k8: 0 : pstate 0 (3300 MHz) [ 7.969613] powernow-k8: 1 : pstate 1 (3000 MHz) [ 7.969615] powernow-k8: 2 : pstate 2 (2400 MHz) [ 7.969617] powernow-k8: 3 : pstate 3 (1800 MHz) [ 7.969619] powernow-k8: 4 : pstate 4 (1400 MHz) [ 7.986971] [drm] Initialized drm 1.1.0 20060810 [ 8.197068] usbcore: registered new interface driver usbserial [ 8.197109] USB Serial support registered for generic [ 8.197183] usbcore: registered new interface driver usbserial_generic [ 8.197187] usbserial: USB Serial Driver core [ 8.210447] radeon: Unknown symbol swiotlb_nr_tbl (err 0) [ 8.210934] radeon: Unknown symbol efi_enabled_facility (err 0) [ 8.226005] USB Serial support registered for pl2303 [ 8.226052] pl2303 11-3:1.0: pl2303 converter detected [ 8.247276] usb 11-3: pl2303 converter now attached to ttyUSB0 [ 8.247305] usbcore: registered new interface driver pl2303 [ 8.247309] pl2303: Prolific PL2303 USB to serial adaptor driver [ 8.338249] hda_codec: ALC889: BIOS auto-probing. [ 8.348344] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 8.348748] snd_hda_intel 0000:01:00.1: irq 43 for MSI/MSI-X [ 8.348783] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 8.400544] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 8.400723] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input6 [ 9.585040] kvm: Nested Virtualization enabled [ 9.585049] kvm: Nested Paging enabled [ 10.268508] Adding 1951892k swap on /dev/sda2. Priority:0 extents:1 across:1951892k [ 10.346437] Adding 1951892k swap on /dev/sdd2. Priority:0 extents:1 across:1951892k [ 10.439662] Adding 1951892k swap on /dev/sdc2. Priority:0 extents:1 across:1951892k [ 10.459980] Adding 1951892k swap on /dev/sdb2. Priority:0 extents:1 across:1951892k [ 11.024547] EXT3-fs (md2): using internal journal [ 11.208707] loop: module loaded [ 11.522852] it87: Found IT8720F chip at 0x228, revision 8 [ 11.522874] it87: Routing internal VCCH to in7 [ 11.522880] it87: Beeping is supported [ 11.523330] hwmon_vid: Unknown VRM version of your x86 CPU [ 13.798471] kjournald starting. Commit interval 5 seconds [ 13.813580] EXT3-fs (md0): using internal journal [ 13.813588] EXT3-fs (md0): mounted filesystem with ordered data mode [ 13.897378] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 13.898163] SGI XFS Quota Management subsystem [ 13.912777] XFS (md1): Mounting Filesystem [ 14.283439] XFS (md1): Ending clean mount [ 14.289140] kjournald starting. Commit interval 5 seconds [ 14.306868] EXT3-fs (md3): using internal journal [ 14.306877] EXT3-fs (md3): mounted filesystem with ordered data mode [ 14.478840] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: discard [ 27.182763] RPC: Registered named UNIX socket transport module. [ 27.182769] RPC: Registered udp transport module. [ 27.182773] RPC: Registered tcp transport module. [ 27.182776] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 27.359631] FS-Cache: Loaded [ 27.443164] FS-Cache: Netfs 'nfs' registered for caching [ 27.482325] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 28.272608] fuse init (API version 7.17) [ 28.659300] binfmt_misc: Unknown symbol bprm_change_interp (err 0) [ 30.252483] vboxdrv: Found 6 processor cores. [ 30.252898] vboxdrv: fAsync=0 offMin=0x832 offMax=0x6caf [ 30.253022] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 30.253027] vboxdrv: Successfully loaded version 4.2.10 (interface 0x001a0004). [ 30.980843] vboxpci: IOMMU not found (not registered) [ 36.060056] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 36.078464] NFSD: starting 90-second grace period [ 36.821208] r8169 0000:03:00.0: eth3: link down [ 36.821219] r8169 0000:03:00.0: eth3: link down [ 36.824553] ADDRCONF(NETDEV_UP): eth3: link is not ready [ 37.017203] lp: driver loaded but no devices found [ 37.055400] ppdev: user-space parallel port driver [ 38.773838] r8169 0000:03:00.0: eth3: link up [ 38.777097] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready [ 38.973846] Ebtables v2.0 registered [ 39.157122] ip_tables: (C) 2000-2006 Netfilter Core Team [ 39.202588] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 49.064089] eth3: no IPv6 routers present ** Model information sys_vendor: Gigabyte Technology Co., Ltd. product_name: GA-990XA-UD3 product_version: chassis_vendor: Gigabyte Technology Co., Ltd. chassis_version: bios_vendor: Award Software International, Inc. bios_version: F9 board_vendor: Gigabyte Technology Co., Ltd. board_name: GA-990XA-UD3 board_version: x.x ** Loaded modules: ip6table_filter ip6_tables iptable_filter ip_tables ebtable_nat ebtables x_tables parport_pc ppdev lp parport pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) cpufreq_powersave cpufreq_conservative cpufreq_stats cpufreq_userspace vboxdrv(O) fuse nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc ext4 crc16 jbd2 xfs k8temp it87 hwmon_vid firewire_sbp2 loop kvm_amd kvm snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm pl2303 usbserial snd_page_alloc ttm snd_seq joydev drm_kms_helper drm powernow_k8 sp5100_tco power_supply snd_seq_device snd_timer snd i2c_algo_bit mperf soundcore crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 aes_generic cryptd edac_mce_amd fam15h_power edac_core k10temp i2c_piix4 mxm_wmi i2c_core pcspkr evdev processor button serio_raw thermal_sys wmi ext3 mbcache jbd dm_mod raid0 raid1 md_mod usbhid hid sr_mod sg cdrom sd_mod crc_t10dif usb_storage uas ohci_hcd xhci_hcd firewire_ohci firewire_core crc_itu_t ahci libahci libata scsi_mod ehci_hcd usbcore r8169 usb_common mii ** PCI devices: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (external gfx0 port B) [1002:5a14] (rev 02) Subsystem: Giga-byte Technology Device [1458:5000] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Region 3: Memory at <ignored> (64-bit, non-prefetchable) Capabilities: <access denied> 00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port B) [1002:5a16] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fd500000-fd5fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port D) [1002:5a18] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:09.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (PCI express gpp port H) [1002:5a1c] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fdd00000-fddfffff Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD890 PCI to PCI bridge (external gfx1 port A) [1002:5a1d] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdb00000-fdbfffff Prefetchable memory behind bridge: 00000000fd800000-00000000fd8fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology Device [1458:b002] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at ff00 [size=8] Region 1: I/O ports at fe00 [size=4] Region 2: I/O ports at fd00 [size=8] Region 3: I/O ports at fc00 [size=4] Region 4: I/O ports at fb00 [size=16] Region 5: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fdffd000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fdffc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fdffb000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 42) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] (rev 40) Subsystem: Giga-byte Technology Device [1458:a132] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fdff4000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40) Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=05, subordinate=05, sec-latency=64 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: fd900000-fd9fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fdffa000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:15.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fd700000-fd7fffff Prefetchable memory behind bridge: 00000000fd600000-00000000fd6fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:16.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fdff9000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:16.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fdff8000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 0 [1022:1600] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 1 [1022:1601] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 2 [1022:1602] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 3 [1022:1603] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k10temp 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 4 [1022:1604] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: fam15h_power 00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Family 15h Processor Function 5 [1022:1605] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Caicos [Radeon HD 6450] [1002:6779] (prog-if 00 [VGA controller]) Subsystem: PC Partner Limited Sapphire HD 6450 1GB DDR3 [174b:e164] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 5 Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at fd5c0000 (64-bit, non-prefetchable) [size=128K] Region 4: I/O ports at be00 [size=256] [virtual] Expansion ROM at fd500000 [disabled] [size=128K] Capabilities: <access denied> 01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI Caicos HDMI Audio [Radeon HD 6400 Series] [1002:aa98] Subsystem: PC Partner Limited Sapphire HD 6450 1GB DDR3 [174b:aa98] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 43 Region 0: Memory at fd5fc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 02:00.0 USB controller [0c03]: Etron Technology, Inc. EJ168 USB 3.0 Host Controller [1b6f:7023] (rev 01) (prog-if 30 [XHCI]) Subsystem: Giga-byte Technology Device [1458:5007] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 41 Region 0: Memory at fd4f8000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 40 Region 0: I/O ports at de00 [size=256] Region 2: Memory at fdcff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fdcf8000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 04:00.0 USB controller [0c03]: Etron Technology, Inc. EJ168 USB 3.0 Host Controller [1b6f:7023] (rev 01) (prog-if 30 [XHCI]) Subsystem: Giga-byte Technology Device [1458:5007] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 42 Region 0: Memory at fdbf8000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 05:0e.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology GA-7VT600-1394 Motherboard [1458:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (8000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at fdaff000 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at af00 [size=128] Capabilities: <access denied> Kernel driver in use: firewire_ohci ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 152d:2336 JMicron Technology Corp. / JMicron USA Technology Corp. Hard Disk Drive Bus 009 Device 002: ID 0e8f:0020 GreenAsia Inc. USB to PS/2 Adapter Bus 011 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port -- System Information: Debian Release: 7.0 APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.2.0-4-amd64 (SMP w/6 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109 ii kmod 9-2 ii linux-base 3.5 ii module-init-tools 9-2 Versions of packages linux-image-3.2.0-4-amd64 recommends: ii firmware-linux-free 3.2 Versions of packages linux-image-3.2.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> ii firmware-linux-nonfree 0.36+wheezy.1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> ii firmware-realtek 0.36+wheezy.1 pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
