Package: src:linux
Followup-For: Bug #697619
Dear Maintainer,
I had no problem with 3.7 kernel, but since 3.8 upgrade, the wireless
keyboard is no more avalaible for password prompt during boot.
If I plug a USB keyboard, this one permits me to enter my password.
The wireless keyboard works fine for the login prompt ....
here is an sample of dmesg
[ 0.413048] usbcore: registered new interface driver usbfs
[ 0.413059] usbcore: registered new interface driver hub
[ 0.413658] usbcore: registered new device driver usb
[ 0.414092] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 0.414096] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.414100] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 1
[ 0.414175] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.414189] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7c00000
[ 0.414233] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[ 0.414278] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.414279] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.414280] usb usb1: Product: xHCI Host Controller
[ 0.414282] usb usb1: Manufacturer: Linux 3.8-trunk-amd64 xhci_hcd
[ 0.414283] usb usb1: SerialNumber: 0000:00:14.0
[ 0.414373] xHCI xhci_add_endpoint called for root hub
[ 0.414375] xHCI xhci_check_bandwidth called for root hub
[ 0.414403] hub 1-0:1.0: USB hub found
[ 0.414412] hub 1-0:1.0: 4 ports detected
[ 0.414865] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.414868] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 2
[ 0.414885] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.414886] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.414887] usb usb2: Product: xHCI Host Controller
[ 0.414888] usb usb2: Manufacturer: Linux 3.8-trunk-amd64 xhci_hcd
[ 0.414890] usb usb2: SerialNumber: 0000:00:14.0
[ 0.414950] xHCI xhci_add_endpoint called for root hub
[ 0.414952] xHCI xhci_check_bandwidth called for root hub
[ 0.414968] hub 2-0:1.0: USB hub found
[ 0.414974] hub 2-0:1.0: 4 ports detected
[
....
[ 0.748768] usb 1-2: New USB device found, idVendor=413c, idProduct=2107
[ 0.748771] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 0.748773] usb 1-2: Product: Dell USB Entry Keyboard
[ 0.748775] usb 1-2: Manufacturer: Dell
[ 0.748857] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc
says 80 microframe
s
[ 0.755442] ata2.01: ATAPI: HL-DT-ST BDDVDRW CH10LS28, 1.00, max UDMA/133
[ 0.759240] usbcore: registered new interface driver usbhid
[ 0.759242] usbhid: USB HID core driver
[ 0.760473] input: Dell Dell USB Entry Keyboard as
/devices/pci0000:00/0000:00:14.0/usb1/1-2/1
-2:1.0/input/input0
[ 0.760514] hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.10
Keyboard [Dell Dell
USB Entry Keyboard] on usb-0000:00:14.0-2/input0
....
[ 81.754986] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 81.755007] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 81.755010] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 81.755012] usb usb4: Product: EHCI Host Controller
[ 81.755015] usb usb4: Manufacturer: Linux 3.8-trunk-amd64 ehci_hcd
[ 81.755017] usb usb4: SerialNumber: 0000:00:1d.0
[ 81.755115] hub 4-0:1.0: USB hub found
[ 81.755119] hub 4-0:1.0: 2 ports detected
....
[ 82.182979] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 82.182985] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 82.183223] hub 3-1:1.0: USB hub found
[ 82.183317] hub 3-1:1.0: 6 ports detected
[ 82.294497] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 82.426741] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 82.426747] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 82.427129] hub 4-1:1.0: USB hub found
[ 82.427214] hub 4-1:1.0: 8 ports detected
[ 82.698196] usb 4-1.8: new full-speed USB device number 3 using ehci-pci
[ 82.793097] usb 4-1.8: New USB device found, idVendor=046d, idProduct=c52b
[ 82.793103] usb 4-1.8: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 82.793106] usb 4-1.8: Product: USB Receiver
[ 82.793109] usb 4-1.8: Manufacturer: Logitech
[ 82.816444] fbcon: inteldrmfb (fb0) is primary device
[ 82.927256] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB
HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.8/input2
[ 82.928971] input: Logitech Unifying Device. Wireless PID:400e as
/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8:1.2/0003:046D:C52B.0004/input/input11
[ 82.930018] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID
v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400e] on
usb-0000:00:1d.0-1.8:1
-- Package-specific info:
** Version:
Linux version 3.8-trunk-amd64 (debian-ker...@lists.debian.org) (gcc version
4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.8-1~experimental.1
** Command line:
BOOT_IMAGE=/vmlinuz-3.8-trunk-amd64 root=/dev/mapper/htpc-root ro quiet
** Not tainted
** Kernel log:
[ 81.739286] ehci-pci 0000:00:1d.0: debug port 2
[ 81.743180] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 81.743183] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c16000
[ 81.754986] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 81.755007] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 81.755010] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 81.755012] usb usb4: Product: EHCI Host Controller
[ 81.755015] usb usb4: Manufacturer: Linux 3.8-trunk-amd64 ehci_hcd
[ 81.755017] usb usb4: SerialNumber: 0000:00:1d.0
[ 81.755115] hub 4-0:1.0: USB hub found
[ 81.755119] hub 4-0:1.0: 2 ports detected
[ 81.755243] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO
conflicts with Region \PMIO 1 (20121018/utaddress-251)
[ 81.755248] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 81.755251] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO
conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 81.755253] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 81.755254] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO
conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 81.755256] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 81.755257] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 81.755279] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO
conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20121018/utaddress-251)
[ 81.755283] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 81.845117] [drm] Initialized drm 1.1.0 20060810
[ 81.883835] asus_wmi: ASUS WMI generic driver loaded
[ 81.892682] asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.9
[ 81.892722] asus_wmi: SFUN value: 0x0<6>[ 81.892936] input: Eee PC WMI
hotkeys as /devices/platform/eeepc-wmi/input/input4
[ 81.893694] asus_wmi: Backlight controlled by ACPI video driver
[ 81.930770] iTCO_vendor_support: vendor-support=0
[ 81.932971] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 81.933013] iTCO_wdt: Found a Panther Point TCO device (Version=2,
TCOBASE=0x0460)
[ 81.933113] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 81.942724] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 82.050732] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 82.123895] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 82.123956] input: HDA Intel PCH Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 82.124001] input: HDA Intel PCH Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 82.124042] input: HDA Intel PCH Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 82.124082] input: HDA Intel PCH Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 82.124122] input: HDA Intel PCH Line Out as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 82.124714] [drm] Memory usable by graphics device = 2048M
[ 82.124718] i915 0000:00:02.0: setting latency timer to 64
[ 82.143781] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 82.143787] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 82.143788] [drm] Driver supports precise vblank timestamp query.
[ 82.143849] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 82.182979] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 82.182985] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 82.183223] hub 3-1:1.0: USB hub found
[ 82.183317] hub 3-1:1.0: 6 ports detected
[ 82.294497] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 82.426741] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 82.426747] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 82.427129] hub 4-1:1.0: USB hub found
[ 82.427214] hub 4-1:1.0: 8 ports detected
[ 82.698196] usb 4-1.8: new full-speed USB device number 3 using ehci-pci
[ 82.793097] usb 4-1.8: New USB device found, idVendor=046d, idProduct=c52b
[ 82.793103] usb 4-1.8: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 82.793106] usb 4-1.8: Product: USB Receiver
[ 82.793109] usb 4-1.8: Manufacturer: Logitech
[ 82.816444] fbcon: inteldrmfb (fb0) is primary device
[ 82.927256] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB
HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.8/input2
[ 82.928971] input: Logitech Unifying Device. Wireless PID:400e as
/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8:1.2/0003:046D:C52B.0004/input/input11
[ 82.930018] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID
v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400e] on
usb-0000:00:1d.0-1.8:1
[ 83.043917] Console: switching to colour frame buffer device 240x67
[ 83.049415] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 83.049416] i915 0000:00:02.0: registered panic notifier
[ 83.050072] acpi device:43: registered as cooling_device9
[ 83.050340] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 83.050408] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[ 83.050524] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 83.633307] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 83.729441] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 83.820585] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 84.046302] loop: module loaded
[ 84.360274] Adding 16142332k swap on /dev/mapper/htpc-swap_1. Priority:-1
extents:1 across:16142332k
[ 84.813915] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
(null)
[ 99.747306] RPC: Registered named UNIX socket transport module.
[ 99.747310] RPC: Registered udp transport module.
[ 99.747312] RPC: Registered tcp transport module.
[ 99.747314] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 99.765281] FS-Cache: Loaded
[ 99.775954] Key type dns_resolver registered
[ 99.800251] FS-Cache: Netfs 'nfs' registered for caching
[ 99.829463] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 101.966112] Bluetooth: Core ver 2.16
[ 101.966124] NET: Registered protocol family 31
[ 101.966125] Bluetooth: HCI device and connection manager initialized
[ 101.966131] Bluetooth: HCI socket layer initialized
[ 101.966133] Bluetooth: L2CAP socket layer initialized
[ 101.966136] Bluetooth: SCO socket layer initialized
[ 102.001881] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 102.001883] Bluetooth: BNEP filters: protocol multicast
[ 102.001890] Bluetooth: BNEP socket layer initialized
[ 102.003705] Bluetooth: RFCOMM TTY layer initialized
[ 102.003713] Bluetooth: RFCOMM socket layer initialized
[ 102.003714] Bluetooth: RFCOMM ver 1.11
[ 103.020388] r8169 0000:03:00.0: firmware: agent loaded rtl_nic/rtl8168f-1.fw
into memory
[ 103.137121] r8169 0000:03:00.0 eth0: link down
[ 103.137147] r8169 0000:03:00.0 eth0: link down
[ 103.137179] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 105.150651] r8169 0000:03:00.0 eth0: link up
[ 105.150662] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0809
board_vendor: ASUSTeK COMPUTER INC.
board_name: P8H77-I
board_version: Rev X.0x
** Loaded modules:
rfcomm
bnep
bluetooth
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
ext2
loop
joydev
hid_logitech_dj
snd_hda_codec_hdmi
snd_hda_codec_via
i915
snd_hda_intel
snd_hda_codec
iTCO_wdt
iTCO_vendor_support
acpi_cpufreq
eeepc_wmi
mperf
asus_wmi
coretemp
drm_kms_helper
drm
i2c_algo_bit
snd_hwdep
snd_pcm
snd_page_alloc
kvm_intel
snd_seq
snd_seq_device
snd_timer
snd
kvm
i2c_i801
sparse_keymap
lpc_ich
ehci_pci
mfd_core
rfkill
i2c_core
soundcore
ehci_hcd
wmi
mei
video
processor
psmouse
serio_raw
evdev
pcspkr
button
ext4
crc16
jbd2
mbcache
xts
gf128mul
dm_crypt
dm_mod
sg
sr_mod
cdrom
sd_mod
crc_t10dif
hid_generic
usbhid
ata_generic
hid
r8169
mii
fan
thermal
thermal_sys
crc32c_intel
ghash_clmulni_intel
cryptd
microcode
ata_piix
libata
scsi_mod
xhci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core
processor DRAM Controller [8086:0150] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:84ca]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core
processor PCI Express Root Port [8086:0151] (rev 09) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v2/3rd
Gen Core processor Graphics Controller [8086:0152] (rev 09) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:84ca]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:84ca]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series
Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:84ca]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7c19000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:84ca]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7c17000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset
Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:8415]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f7c10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 5 [8086:1e18] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:84ca]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7c16000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation H77 Express Chipset LPC Controller
[8086:1e4a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:84ca]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 7 Series/C210 Series Chipset
Family 4-port SATA Controller [IDE mode] [8086:1e00] (rev 04) (prog-if 8f
[Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:84ca]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f110 [size=8]
Region 1: I/O ports at f100 [size=4]
Region 2: I/O ports at f0f0 [size=8]
Region 3: I/O ports at f0e0 [size=4]
Region 4: I/O ports at f0d0 [size=16]
Region 5: I/O ports at f0c0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family
SMBus Controller [8086:1e22] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:84ca]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7c15000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
00:1f.5 IDE interface [0101]: Intel Corporation 7 Series/C210 Series Chipset
Family 2-port SATA Controller [IDE mode] [8086:1e08] (rev 04) (prog-if 85
[Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:84ca]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f070 [size=16]
Region 5: I/O ports at f060 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:8505]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at f0004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 002: ID 413c:2107 Dell Computer Corp.
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (650, 'testing'), (550, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.8-trunk-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.8-trunk-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.8-trunk-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.8-trunk-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27
pn linux-doc-3.8 <none>
Versions of packages linux-image-3.8-trunk-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.37
ii firmware-linux-nonfree 0.37
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.37
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.8-trunk-amd64/prerm/removing-running-kernel-3.8-trunk-amd64:
true
linux-image-3.8-trunk-amd64/postinst/depmod-error-initrd-3.8-trunk-amd64:
false
linux-image-3.8-trunk-amd64/postinst/missing-firmware-3.8-trunk-amd64:
linux-image-3.8-trunk-amd64/postinst/ignoring-ramdisk:
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
