Hello Kurt,
thanks for your reply. Of course I like to help, see the required
information (and a little bit more) attached to this mail.
The "cmov" instruction by itself should not be the problem as this CPU
supports it - but maybe the presence of cmov suggests using other
instructions which are missing?
Hope my information helps you a bit - if I can provide further details,
don't hesitate to ask!
Best regards,
Hans-Juergen Mauser
Kurt Roeckx schrieb:
On Sun, Feb 03, 2013 at 05:47:35PM +0100, Hans-Juergen Mauser wrote:
Package: openssl
Version: 1.0.1c-4
Hello!
When trying a new Wheezy install on a machine with Cyrix MII / IBM
6x86 CPU, openssl cannot complete it's install routine because the
creation of the default certificate fails reproducibly ith the
result "illegal instruction".
It seems as if the package is compiled with some optimisation not
suitable for regular Pentium machine.
libssl is actually compiled 3 times. Ones for the default
architecture which is i486, once for i586, and once for
i686 with cmov. The dynamic linker should pick up the correct
one.
Can you verify that which version you pick up? You can see this
with:
ldd /usr/bin/openssl
Can you also show /proc/cpuinfo?
openssl also contains hand written assembler, which detects cpu
capabilities as well. Maybe something is broken there.
In any case would it be useful if you could give information
about which function it was that has the problem. Can you
install libssl1.0.0-dbg and run whatever you wanted to
do from gdb and give me a backtrace?
Kurt
processor : 0
vendor_id : CyrixInstead
cpu family : 6
model : 2
model name : M II 3.5x Core/Bus Clock
stepping : 8
cpu MHz : 233.895
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu de tsc msr cx8 pge cmov mmx cyrix_arr
bogomips : 467.79
clflush size : 32
cache_alignment : 32
address sizes : 32 bits physical, 32 bits virtual
power management:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-486 (debian-ker...@lists.debian.org) (gcc
version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.2.35-2
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.0 present.
[ 0.000000] DMI: System Manufacturer System Name/P/I-P55T2P4, BIOS
#401A0-0207-2 04/28/99
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x100000
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009c000] 9c000 size 12288
[ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000
[ 0.000000] 0000000000 - 0020000000 page 4k
[ 0.000000] kernel direct mapping tables up to 20000000 @ 177d000-1800000
[ 0.000000] RAMDISK: 1f680000 - 20000000
[ 0.000000] ACPI Error: A valid RSDP was not found (20110623/tbxfroot-219)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 512MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 20000000
[ 0.000000] low ram: 0 - 20000000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00020000
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] On node 0 totalpages: 130960
[ 0.000000] free_area_init_node: node 0, pgdat c13c5488, node_mem_map
df27f200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3952 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125984 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
20000000:dfff0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 129936
[ 0.000000] Kernel command line: auto BOOT_IMAGE=Linux ro root=801
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 504200k/524288k available (2588k kernel code, 19640k
reserved, 1300k data, 452k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] .init : 0xc13cd000 - 0xc143e000 ( 452 kB)
[ 0.000000] .data : 0xc12870ac - 0xc13cc0c0 (1300 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12870ac (2588 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=dec06000 soft=dec08000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 233.895 MHz processor.
[ 0.004015] Calibrating delay loop (skipped), value calculated using timer
frequency.. 467.79 BogoMIPS (lpj=935580)
[ 0.004204] pid_max: default: 32768 minimum: 301
[ 0.004758] Security Framework initialized
[ 0.004896] AppArmor: AppArmor disabled by boot time parameter
[ 0.005111] Mount-cache hash table entries: 512
[ 0.006331] Initializing cgroup subsys cpuacct
[ 0.006457] Initializing cgroup subsys memory
[ 0.006603] Initializing cgroup subsys devices
[ 0.006694] Initializing cgroup subsys freezer
[ 0.006782] Initializing cgroup subsys net_cls
[ 0.006868] Initializing cgroup subsys blkio
[ 0.006999] Initializing cgroup subsys perf_event
[ 0.007406] CPU: Cyrix M II 3.5x Core/Bus Clock stepping 08
[ 0.010819] Performance Events:
[ 0.013581] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.015640] devtmpfs: initialized
[ 0.019163] print_constraints: dummy:
[ 0.019895] NET: Registered protocol family 16
[ 0.021272] EISA bus registered
[ 0.025414] PCI: PCI BIOS revision 2.10 entry at 0xf0430, last bus=2
[ 0.025524] PCI: Using configuration type 1 for base access
[ 0.034793] bio: create slab <bio-0> at 0
[ 0.035759] ACPI: Interpreter disabled.
[ 0.036574] vgaarb: loaded
[ 0.037302] PCI: Probing PCI hardware
[ 0.037397] PCI: Probing PCI hardware (bus 00)
[ 0.037857] pci 0000:00:00.0: [8086:1250] type 0 class 0x000600
[ 0.038102] pci 0000:00:07.0: [8086:7000] type 0 class 0x000601
[ 0.038315] pci 0000:00:07.1: [8086:7010] type 0 class 0x000101
[ 0.038425] pci 0000:00:07.1: reg 20: [io 0xe800-0xe80f]
[ 0.038590] pci 0000:00:09.0: [1002:4758] type 0 class 0x000300
[ 0.038644] pci 0000:00:09.0: reg 10: [mem 0xde000000-0xdeffffff]
[ 0.038746] pci 0000:00:09.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.038875] pci 0000:00:0a.0: [8086:1010] type 0 class 0x000200
[ 0.038947] pci 0000:00:0a.0: reg 10: [mem 0xdd800000-0xdd81ffff 64bit]
[ 0.039018] pci 0000:00:0a.0: reg 20: [io 0xe000-0xe03f]
[ 0.039152] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.039283] pci 0000:00:0a.1: [8086:1010] type 0 class 0x000200
[ 0.039354] pci 0000:00:0a.1: reg 10: [mem 0xdd000000-0xdd01ffff 64bit]
[ 0.039424] pci 0000:00:0a.1: reg 20: [io 0xd800-0xd83f]
[ 0.039550] pci 0000:00:0a.1: PME# supported from D0 D3hot D3cold
[ 0.039676] pci 0000:00:0b.0: [1000:000f] type 0 class 0x000100
[ 0.039734] pci 0000:00:0b.0: reg 10: [io 0xd400-0xd4ff]
[ 0.039780] pci 0000:00:0b.0: reg 14: [mem 0xdc800000-0xdc8000ff]
[ 0.039827] pci 0000:00:0b.0: reg 18: [mem 0xdc000000-0xdc000fff]
[ 0.039906] pci 0000:00:0b.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.040198] pci 0000:00:0c.0: [1011:0026] type 1 class 0x000604
[ 0.040513] pci 0000:01:00.0: [1011:0026] type 1 class 0x000604
[ 0.040744] pci 0000:01:01.0: [1077:1216] type 0 class 0x000100
[ 0.040809] pci 0000:01:01.0: reg 10: [io 0xc800-0xc8ff]
[ 0.040858] pci 0000:01:01.0: reg 14: [mem 0xdb800000-0xdb800fff]
[ 0.040961] pci 0000:01:01.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.041144] pci 0000:00:0c.0: PCI bridge to [bus 01-02]
[ 0.041262] pci 0000:00:0c.0: bridge window [io 0xc000-0xcfff]
[ 0.041300] pci 0000:00:0c.0: bridge window [mem 0xdb800000-0xdbffffff]
[ 0.041345] pci 0000:00:0c.0: bridge window [mem 0xdfe00000-0xe7efffff
64bit pref]
[ 0.041508] pci 0000:02:00.0: [101e:1960] type 0 class 0x000104
[ 0.041580] pci 0000:02:00.0: reg 10: [mem 0xe0000000-0xe3ffffff pref]
[ 0.041720] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.041918] pci 0000:01:00.0: PCI bridge to [bus 02-02]
[ 0.042038] pci 0000:01:00.0: bridge window [mem 0xdff00000-0xe7efffff
64bit pref]
[ 0.043392] vgaarb: device added:
PCI:0000:00:09.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.046734] pci 0000:00:07.0: PIIX/ICH IRQ router [8086:7000]
[ 0.046976] PCI: pci_cache_line_size set to 32 bytes
[ 0.048655] Switching to clocksource pit
[ 0.066164] pnp: PnP ACPI: disabled
[ 0.066308] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.067010] PnPBIOS: Found PnP BIOS installation structure at 0xc00fcf10
[ 0.067121] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xcf40, dseg 0xf0000
[ 0.067724] pnp 00:00: [irq 7]
[ 0.067759] pnp 00:00: [io 0x0378-0x037f]
[ 0.067789] pnp 00:00: [io 0x0778-0x077f]
[ 0.068290] pnp 00:00: Plug and Play BIOS device, IDs PNP0400 (active)
[ 0.068400] pnp 00:02: [irq 4]
[ 0.068431] pnp 00:02: [io 0x03f8-0x03ff]
[ 0.068891] pnp 00:02: Plug and Play BIOS device, IDs PNP0501 (active)
[ 0.068998] pnp 00:03: [irq 4]
[ 0.069027] pnp 00:03: [io 0x03e8-0x03ef]
[ 0.069550] pnp 00:03: Plug and Play BIOS device, IDs PNP0501 (active)
[ 0.069669] pnp 00:04: [irq 6]
[ 0.069698] pnp 00:04: [dma 2]
[ 0.069727] pnp 00:04: [io 0x03f2-0x03f5]
[ 0.070003] pnp 00:04: Plug and Play BIOS device, IDs PNP0700 (active)
[ 0.070116] pnp 00:06: [mem 0x00000000-0x0009ffff]
[ 0.070150] pnp 00:06: [mem 0x00100000-0x1fffffff]
[ 0.070182] pnp 00:06: [mem 0x000e8000-0x000fffff]
[ 0.070215] pnp 00:06: [mem 0xfffe0000-0xffffffff]
[ 0.070675] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.070809] system 00:06: [mem 0x00100000-0x1fffffff] could not be reserved
[ 0.070924] system 00:06: [mem 0x000e8000-0x000fffff] could not be reserved
[ 0.071040] system 00:06: [mem 0xfffe0000-0xffffffff] could not be reserved
[ 0.071154] system 00:06: Plug and Play BIOS device, IDs PNP0c01 (active)
[ 0.071355] pnp 00:07: [irq 2]
[ 0.071385] pnp 00:07: [io 0x0020-0x0021]
[ 0.071415] pnp 00:07: [io 0x00a0-0x00a1]
[ 0.071445] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.071722] pnp 00:07: Plug and Play BIOS device, IDs PNP0000 (active)
[ 0.071833] pnp 00:08: [irq 0]
[ 0.071862] pnp 00:08: [io 0x0040-0x0043]
[ 0.072147] pnp 00:08: Plug and Play BIOS device, IDs PNP0100 (active)
[ 0.072260] pnp 00:09: [irq 8]
[ 0.072289] pnp 00:09: [io 0x0070-0x0071]
[ 0.072569] pnp 00:09: Plug and Play BIOS device, IDs PNP0b00 (active)
[ 0.072687] pnp 00:0a: [irq 1]
[ 0.072716] pnp 00:0a: [io 0x0060]
[ 0.072743] pnp 00:0a: [io 0x0064]
[ 0.072996] pnp 00:0a: Plug and Play BIOS device, IDs PNP0303 (active)
[ 0.073113] pnp 00:0b: [irq 13]
[ 0.073141] pnp 00:0b: [io 0x00f0]
[ 0.073418] pnp 00:0b: Plug and Play BIOS device, IDs PNP0c04 (active)
[ 0.073539] pnp 00:0c: [dma 4]
[ 0.073568] pnp 00:0c: [io 0x0000-0x000f]
[ 0.073615] pnp 00:0c: [io 0x0080-0x0090]
[ 0.073645] pnp 00:0c: [io 0x0094-0x009f]
[ 0.073674] pnp 00:0c: [io 0x00c0-0x00de]
[ 0.073933] pnp 00:0c: Plug and Play BIOS device, IDs PNP0200 (active)
[ 0.074053] pnp 00:0d: [io 0x0061]
[ 0.074307] pnp 00:0d: Plug and Play BIOS device, IDs PNP0800 (active)
[ 0.074431] pnp 00:0e: [io 0x0cf8-0x0cff]
[ 0.074710] pnp 00:0e: Plug and Play BIOS device, IDs PNP0a03 (active)
[ 0.074778] PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver
[ 0.103312] PCI: max bus depth: 2 pci_try_num: 3
[ 0.103504] pci 0000:00:09.0: BAR 6: assigned [mem 0x20000000-0x2000ffff
pref]
[ 0.103663] pci 0000:00:0b.0: BAR 6: assigned [mem 0x20010000-0x2001ffff
pref]
[ 0.103806] pci 0000:01:00.0: BAR 14: assigned [mem 0xdb900000-0xdb9fffff]
[ 0.103921] pci 0000:01:01.0: BAR 6: assigned [mem 0xdfe00000-0xdfe1ffff
pref]
[ 0.104058] pci 0000:02:00.0: BAR 6: assigned [mem 0xdff00000-0xdff0ffff
pref]
[ 0.104184] pci 0000:01:00.0: PCI bridge to [bus 02-02]
[ 0.104291] pci 0000:01:00.0: bridge window [mem 0xdb900000-0xdb9fffff]
[ 0.104404] pci 0000:01:00.0: bridge window [mem 0xdff00000-0xe7efffff
64bit pref]
[ 0.104538] pci 0000:00:0c.0: PCI bridge to [bus 01-02]
[ 0.104637] pci 0000:00:0c.0: bridge window [io 0xc000-0xcfff]
[ 0.104744] pci 0000:00:0c.0: bridge window [mem 0xdb800000-0xdbffffff]
[ 0.104855] pci 0000:00:0c.0: bridge window [mem 0xdfe00000-0xe7efffff
64bit pref]
[ 0.105038] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.105073] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.105110] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.105145] pci_bus 0000:01: resource 1 [mem 0xdb800000-0xdbffffff]
[ 0.105182] pci_bus 0000:01: resource 2 [mem 0xdfe00000-0xe7efffff 64bit
pref]
[ 0.105222] pci_bus 0000:02: resource 1 [mem 0xdb900000-0xdb9fffff]
[ 0.105259] pci_bus 0000:02: resource 2 [mem 0xdff00000-0xe7efffff 64bit
pref]
[ 0.105809] NET: Registered protocol family 2
[ 0.106560] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.109136] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.111173] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.112383] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.112500] TCP reno registered
[ 0.112616] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.112785] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.113790] NET: Registered protocol family 1
[ 0.113992] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.114117] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[ 0.114246] pci 0000:00:09.0: Boot video device
[ 0.114370] PCI: CLS 32 bytes, default 32
[ 0.115029] Unpacking initramfs...
[ 3.686544] Freeing initrd memory: 9728k freed
[ 3.854735] audit: initializing netlink socket (disabled)
[ 3.854980] type=2000 audit(1359917157.848:1): initialized
[ 4.059985] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 4.061427] VFS: Disk quotas dquot_6.5.2
[ 4.061767] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 4.062472] msgmni has been set to 1003
[ 4.064636] alg: No test for stdrng (krng)
[ 4.065056] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 4.065193] io scheduler noop registered
[ 4.065275] io scheduler deadline registered
[ 4.065437] io scheduler cfq registered (default)
[ 4.066772] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.067180] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 4.067282] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 4.069016] isapnp: Scanning for PnP cards...
[ 4.423560] isapnp: No Plug & Play device found
[ 4.424347] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.429275] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.434822] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[ 4.441218] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.446748] 00:03: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[ 4.449974] Linux agpgart interface v0.103
[ 4.452647] i8042: PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
[ 4.452762] i8042: PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 4.453885] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.455341] mousedev: PS/2 mouse device common for all mice
[ 4.456773] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 4.456971] rtc0: alarms up to one day, 114 bytes nvram
[ 4.457692] EISA: Probing bus 0 at eisa.0
[ 4.457950] EISA: Detected 0 cards.
[ 4.458040] cpuidle: using governor ladder
[ 4.458126] cpuidle: using governor menu
[ 4.460973] TCP cubic registered
[ 4.461426] NET: Registered protocol family 10
[ 4.467566] Mobile IPv6
[ 4.467679] NET: Registered protocol family 17
[ 4.467857] Registering the dns_resolver key type
[ 4.468210] Using IPI Shortcut mode
[ 4.469566] PM: Hibernation image not present or could not be loaded.
[ 4.469688] registered taskstats version 1
[ 4.471065] rtc_cmos 00:09: setting system clock to 2013-02-03 18:45:59 UTC
(1359917159)
[ 4.471617] Initializing network drop monitor service
[ 4.472663] Freeing unused kernel memory: 452k freed
[ 4.483153] Write protecting the kernel text: 2592k
[ 4.483702] Write protecting the kernel read-only data: 1036k
[ 4.488828] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 4.641576] udevd[43]: starting version 175
[ 5.055912] Switching to clocksource tsc
[ 5.156554] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 5.156701] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 5.157014] PCI: setting IRQ 9 as level-triggered
[ 5.157053] e1000 0000:00:0a.0: found PCI INT A -> IRQ 9
[ 5.621846] SCSI subsystem initialized
[ 5.648407] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST
2006)
[ 5.711115] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 5.711428] megaraid: probe new device 0x101e:0x1960:0x101e:0x0493: bus
2:slot 0:func 0
[ 5.883690] libata version 3.00 loaded.
[ 5.887685] megaraid: fw version:[111U] bios version:[F320]
[ 5.931621] scsi0 : LSI Logic MegaRAID driver
[ 5.940920] scsi[0]: skipping scsi channel 0 [Phy 0] for non-raid devices
[ 5.941769] qla1280: Skipping AMI SubSys Vendor ID Chip
[ 6.007086] scsi[0]: skipping scsi channel 1 [Phy 1] for non-raid devices
[ 6.030045] megaraid[0]: physical device scan re-enabled
[ 6.247125] e1000 0000:00:0a.0: eth0: (PCI:33MHz:32-bit) 00:04:23:cd:84:60
[ 6.247315] e1000 0000:00:0a.0: eth0: Intel(R) PRO/1000 Network Connection
[ 6.247698] PCI: setting IRQ 10 as level-triggered
[ 6.247735] sym53c8xx 0000:00:0b.0: found PCI INT A -> IRQ 10
[ 6.259804] sym0: <875> rev 0x26 at pci 0000:00:0b.0 irq 10
[ 6.262414] sym0: Tekram NVRAM, ID 7, Fast-20, SE, parity checking
[ 6.263401] sym0: SCSI BUS has been reset.
[ 6.270163] scsi1 : sym-2.2.3
[ 6.273170] ata_piix 0000:00:07.1: version 2.13
[ 6.273253] ata_piix 0000:00:07.1: enabling device (0000 -> 0001)
[ 6.300544] scsi2 : ata_piix
[ 6.303615] scsi3 : ata_piix
[ 6.304425] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xe800 irq 14
[ 6.304546] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xe808 irq 15
[ 6.306559] e1000 0000:00:0a.1: IRQ 15 doesn't match PIRQ mask 0x1eb8; try
pci=usepirqmask
[ 6.306710] PCI: setting IRQ 15 as level-triggered
[ 6.306744] e1000 0000:00:0a.1: found PCI INT B -> IRQ 15
[ 6.310730] ata1: port disabled--ignoring
[ 6.310975] ata2: port disabled--ignoring
[ 6.318930] scsi[0]: scanning scsi channel 2 [virtual] for logical drives
[ 6.320207] scsi 0:2:0:0: Direct-Access MegaRAID LD 0 RAID1 34G 111U
PQ: 0 ANSI: 2
[ 6.321755] scsi 0:2:1:0: Direct-Access MegaRAID LD 1 RAID5 280G 111U
PQ: 0 ANSI: 2
[ 6.323223] scsi 0:2:2:0: Direct-Access MegaRAID LD 2 RAID1 34G 111U
PQ: 0 ANSI: 2
[ 6.700210] sd 0:2:0:0: [sda] 71094272 512-byte logical blocks: (36.4
GB/33.9 GiB)
[ 6.700524] sd 0:2:0:0: [sda] Write Protect is off
[ 6.700634] sd 0:2:0:0: [sda] Mode Sense: 00 00 00 00
[ 6.700764] sd 0:2:0:0: [sda] Asking for cache data failed
[ 6.700872] sd 0:2:0:0: [sda] Assuming drive cache: write through
[ 6.706069] sd 0:2:0:0: [sda] Asking for cache data failed
[ 6.706198] sd 0:2:0:0: [sda] Assuming drive cache: write through
[ 6.716506] sda: sda1 sda2
[ 6.724482] sd 0:2:1:0: [sdb] 573493248 512-byte logical blocks: (293 GB/273
GiB)
[ 6.724800] sd 0:2:1:0: [sdb] Write Protect is off
[ 6.724911] sd 0:2:1:0: [sdb] Mode Sense: 00 00 00 00
[ 6.725038] sd 0:2:1:0: [sdb] Asking for cache data failed
[ 6.725140] sd 0:2:1:0: [sdb] Assuming drive cache: write through
[ 6.726791] sd 0:2:1:0: [sdb] Asking for cache data failed
[ 6.726912] sd 0:2:1:0: [sdb] Assuming drive cache: write through
[ 6.733480] sdb: sdb1
[ 6.735918] sd 0:2:2:0: [sdc] 71129088 512-byte logical blocks: (36.4
GB/33.9 GiB)
[ 6.736208] sd 0:2:2:0: [sdc] Write Protect is off
[ 6.736321] sd 0:2:2:0: [sdc] Mode Sense: 00 00 00 00
[ 6.736437] sd 0:2:2:0: [sdc] Asking for cache data failed
[ 6.736549] sd 0:2:2:0: [sdc] Assuming drive cache: write through
[ 6.743958] sd 0:2:0:0: [sda] Asking for cache data failed
[ 6.744088] sd 0:2:0:0: [sda] Assuming drive cache: write through
[ 6.744195] sd 0:2:0:0: [sda] Attached SCSI disk
[ 6.744702] sd 0:2:2:0: [sdc] Asking for cache data failed
[ 6.744893] sd 0:2:2:0: [sdc] Assuming drive cache: write through
[ 6.746013] sd 0:2:1:0: [sdb] Asking for cache data failed
[ 6.746134] sd 0:2:1:0: [sdb] Assuming drive cache: write through
[ 6.746239] sd 0:2:1:0: [sdb] Attached SCSI disk
[ 6.772504] sdc: sdc1 sdc2
[ 6.780028] sd 0:2:2:0: [sdc] Asking for cache data failed
[ 6.780159] sd 0:2:2:0: [sdc] Assuming drive cache: write through
[ 6.780273] sd 0:2:2:0: [sdc] Attached SCSI disk
[ 6.823073] sd 0:2:0:0: Attached scsi generic sg0 type 0
[ 6.824966] sd 0:2:1:0: Attached scsi generic sg1 type 0
[ 6.832084] sd 0:2:2:0: Attached scsi generic sg2 type 0
[ 7.064188] e1000 0000:00:0a.1: eth1: (PCI:33MHz:32-bit) 00:04:23:cd:84:61
[ 7.064501] e1000 0000:00:0a.1: eth1: Intel(R) PRO/1000 Network Connection
[ 7.648411] scsi: waiting for bus probes to complete ...
[ 9.554121] scsi 1:0:1:0: CD-ROM PLEXTOR CD-ROM PX-32TS 1.03
PQ: 0 ANSI: 2
[ 9.554425] scsi target1:0:1: Beginning Domain Validation
[ 9.557233] scsi target1:0:1: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15)
[ 9.559822] scsi target1:0:1: Domain Validation skipping write tests
[ 9.559937] scsi target1:0:1: Ending Domain Validation
[ 9.568389] scsi 1:0:2:0: CD-ROM PLEXTOR CD-ROM PX-32TS 1.03
PQ: 0 ANSI: 2
[ 9.568651] scsi target1:0:2: Beginning Domain Validation
[ 9.571361] scsi target1:0:2: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15)
[ 9.573835] scsi target1:0:2: Domain Validation skipping write tests
[ 9.573945] scsi target1:0:2: Ending Domain Validation
[ 13.101269] scsi 1:0:1:0: Attached scsi generic sg3 type 5
[ 13.119392] scsi 1:0:2:0: Attached scsi generic sg4 type 5
[ 13.227670] sr0: scsi-1 drive
[ 13.227802] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 13.235455] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 13.241759] sr1: scsi-1 drive
[ 13.246631] sr 1:0:2:0: Attached scsi CD-ROM sr1
[ 13.513994] PM: Starting manual resume from disk
[ 13.514169] PM: Hibernation image partition 8:34 present
[ 13.514193] PM: Looking for hibernation image.
[ 13.515409] PM: Image not found (code -22)
[ 13.515439] PM: Hibernation image not present or could not be loaded.
[ 13.755222] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 16.229204] udevd[254]: starting version 175
[ 18.068053] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.137673] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 22.536215] Adding 3922940k swap on /dev/sdc2. Priority:-1 extents:1
across:3922940k
[ 22.584334] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 23.000078] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 23.370208] loop: module loaded
[ 30.558744] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts:
(null)
[ 30.660836] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
(null)
[ 30.753975] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts:
(null)
[ 33.830061] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX
[ 33.830909] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 33.831478] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 37.125719] RPC: Registered named UNIX socket transport module.
[ 37.125881] RPC: Registered udp transport module.
[ 37.125970] RPC: Registered tcp transport module.
[ 37.126059] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 37.223120] FS-Cache: Loaded
[ 37.424614] FS-Cache: Netfs 'nfs' registered for caching
[ 37.519467] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 39.084588] The scan_unevictable_pages sysctl/node-interface has been
disabled for lack of a legitimate use case. If you have one, please send an
email to linux...@kvack.org.
[ 39.715894] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 39.794588] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 39.929972] nf_conntrack version 0.5.0 (8037 buckets, 32148 max)
[ 44.240595] eth1: no IPv6 routers present
[ 58.702451] Bluetooth: Core ver 2.16
[ 58.711961] NET: Registered protocol family 31
[ 58.711997] Bluetooth: HCI device and connection manager initialized
[ 58.712035] Bluetooth: HCI socket layer initialized
[ 58.712062] Bluetooth: L2CAP socket layer initialized
[ 58.720621] Bluetooth: SCO socket layer initialized
[ 58.798721] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 58.798764] Bluetooth: BNEP filters: protocol multicast
[ 58.812131] Bluetooth: RFCOMM TTY layer initialized
[ 58.812194] Bluetooth: RFCOMM socket layer initialized
[ 58.812221] Bluetooth: RFCOMM ver 1.11
[ 58.957368] lp: driver loaded but no devices found
[ 59.052619] ppdev: user-space parallel port driver
[ 59.115832] parport_pc 00:00: reported by Plug and Play BIOS
[ 59.116005] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 59.218802] lp0: using parport0 (interrupt-driven).
[ 59.227903] parport1: PC-style at 0x278 (0x678) [PCSPP,TRISTATE]
[ 59.355564] parport1: irq 3 detected
[ 59.460469] lp1: using parport1 (polling).
[ 67.196349] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 69.277181] colord-sane[2724]: segfault at 0 ip b72abe35 sp bfef198c error
ffff0004 in libc-2.13.so[b7210000+15c000]
[ 88.178966] sshd (3091): /proc/3091/oom_adj is deprecated, please use
/proc/3091/oom_score_adj instead.
(gdb) run req -new -x509 -out cert.pem -days 3650
Starting program: /usr/bin/openssl req -new -x509 -out cert.pem -days 3650
Generating a 2048 bit RSA private key
Program received signal SIGILL, Illegal instruction.
0xb7e032b5 in OPENSSL_ia32_rdrand () at x86cpuid.s:333
333 x86cpuid.s: Datei oder Verzeichnis nicht gefunden.
(gdb) bt
#0 0xb7e032b5 in OPENSSL_ia32_rdrand () at x86cpuid.s:333
(gdb) frame
#0 0xb7e032b5 in OPENSSL_ia32_rdrand () at x86cpuid.s:333
333 in x86cpuid.s
(gdb) info frame
Stack level 0, frame at 0x0:
eip = 0xb7e032b5 in OPENSSL_ia32_rdrand (x86cpuid.s:333); saved eip 0xb7e032b5
Outermost frame: outermost
source language asm.
Arglist at unknown address.
Locals at unknown address, Previous frame's sp in esp
(gdb)
linux-gate.so.1 => (0xb777a000)
libssl.so.1.0.0 => /usr/lib/i386-linux-gnu/i686/cmov/libssl.so.1.0.0
(0xb770e000)
libcrypto.so.1.0.0 =>
/usr/lib/i386-linux-gnu/i686/cmov/libcrypto.so.1.0.0 (0xb754f000)
libdl.so.2 => /lib/i386-linux-gnu/i686/cmov/libdl.so.2 (0xb754b000)
libz.so.1 => /lib/i386-linux-gnu/libz.so.1 (0xb7532000)
libc.so.6 => /lib/i386-linux-gnu/i686/cmov/libc.so.6 (0xb73cf000)
/lib/ld-linux.so.2 (0xb777b000)
