Package: broadcom-sta-dkms Version: 5.100.82.112-8 Severity: important I'm going from bad to worse.
After having lots of problems for getting working "brcmsmac" driver in this system (see bug #664767) I finally surrender tried again with the closed source driver (wl) but this driver is not even capable of associate to the AP. I'm attaching two syslog excerpts: wl.txt → when trying to associate the wireless card with AP using wl driver rt8200 → when I test with a different wireless card using rt8200 driver As you can see, the former fails while the latter works fine. -- System Information: Debian Release: 7.0 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 3.2.0-4-686-pae (SMP w/2 CPU cores) Locale: LANG=es_ES.utf8, LC_CTYPE=es_ES.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages broadcom-sta-dkms depends on: ii dkms 2.2.0.3-1.2 Versions of packages broadcom-sta-dkms recommends: ii wireless-tools 30~pre9-8 broadcom-sta-dkms suggests no packages. -- no debconf information
root@stt300:~# tail -f /var/log/syslog Feb 2 10:31:03 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Feb 2 10:31:03 stt300 NetworkManager[2610]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0] Feb 2 10:31:03 stt300 NetworkManager[2610]: <info> Activation (wlan0/wireless): connection 'WLAN_0DED' has security, and secrets exist. No new secrets needed. Feb 2 10:31:03 stt300 NetworkManager[2610]: <info> Config: added 'ssid' value 'WLAN_0DED' Feb 2 10:31:03 stt300 NetworkManager[2610]: <info> Config: added 'scan_ssid' value '1' Feb 2 10:31:03 stt300 NetworkManager[2610]: <info> Config: added 'key_mgmt' value 'WPA-PSK' Feb 2 10:31:03 stt300 NetworkManager[2610]: <info> Config: added 'psk' value '<omitted>' Feb 2 10:31:03 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Feb 2 10:31:03 stt300 NetworkManager[2610]: <info> Config: set interface ap_scan to 1 Feb 2 10:31:03 stt300 NetworkManager[2610]: <info> (wlan0): supplicant interface state: inactive -> scanning Feb 2 10:31:28 stt300 NetworkManager[2610]: <warn> Activation (wlan0/wireless): association took too long. Feb 2 10:31:28 stt300 NetworkManager[2610]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0] Feb 2 10:31:28 stt300 NetworkManager[2610]: <warn> Activation (wlan0/wireless): asking for new secrets Feb 2 10:31:28 stt300 NetworkManager[2610]: <warn> Couldn't disconnect supplicant interface: This interface is not connected. Feb 2 10:31:28 stt300 NetworkManager[2610]: <warn> Couldn't disconnect supplicant interface: This interface is not connected. Feb 2 10:31:33 stt300 NetworkManager[2610]: <info> (wlan0): supplicant interface state: scanning -> inactive Feb 2 10:31:34 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Feb 2 10:31:34 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Feb 2 10:31:34 stt300 NetworkManager[2610]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0] Feb 2 10:31:34 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Feb 2 10:31:34 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Feb 2 10:31:34 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Feb 2 10:31:34 stt300 NetworkManager[2610]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0] Feb 2 10:31:34 stt300 NetworkManager[2610]: <info> Activation (wlan0/wireless): connection 'WLAN_0DED' has security, and secrets exist. No new secrets needed. Feb 2 10:31:34 stt300 NetworkManager[2610]: <info> Config: added 'ssid' value 'WLAN_0DED' Feb 2 10:31:34 stt300 NetworkManager[2610]: <info> Config: added 'scan_ssid' value '1' Feb 2 10:31:34 stt300 NetworkManager[2610]: <info> Config: added 'key_mgmt' value 'WPA-PSK' Feb 2 10:31:34 stt300 NetworkManager[2610]: <info> Config: added 'psk' value '<omitted>' Feb 2 10:31:34 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Feb 2 10:31:34 stt300 NetworkManager[2610]: <info> Config: set interface ap_scan to 1 Feb 2 10:31:34 stt300 NetworkManager[2610]: <info> (wlan0): supplicant interface state: inactive -> scanning Feb 2 10:31:59 stt300 NetworkManager[2610]: <warn> Activation (wlan0/wireless): association took too long. Feb 2 10:31:59 stt300 NetworkManager[2610]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0] Feb 2 10:31:59 stt300 NetworkManager[2610]: <warn> Activation (wlan0/wireless): asking for new secrets Feb 2 10:31:59 stt300 NetworkManager[2610]: <warn> Couldn't disconnect supplicant interface: This interface is not connected. Feb 2 10:31:59 stt300 NetworkManager[2610]: <warn> Couldn't disconnect supplicant interface: This interface is not connected. Feb 2 10:32:04 stt300 NetworkManager[2610]: <info> (wlan0): supplicant interface state: scanning -> inactive Feb 2 10:32:06 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Feb 2 10:32:06 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Feb 2 10:32:06 stt300 NetworkManager[2610]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0] Feb 2 10:32:06 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Feb 2 10:32:06 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Feb 2 10:32:06 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Feb 2 10:32:06 stt300 NetworkManager[2610]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0] Feb 2 10:32:06 stt300 NetworkManager[2610]: <info> Activation (wlan0/wireless): connection 'WLAN_0DED' has security, and secrets exist. No new secrets needed. Feb 2 10:32:06 stt300 NetworkManager[2610]: <info> Config: added 'ssid' value 'WLAN_0DED' Feb 2 10:32:06 stt300 NetworkManager[2610]: <info> Config: added 'scan_ssid' value '1' Feb 2 10:32:06 stt300 NetworkManager[2610]: <info> Config: added 'key_mgmt' value 'WPA-PSK' Feb 2 10:32:06 stt300 NetworkManager[2610]: <info> Config: added 'psk' value '<omitted>' Feb 2 10:32:06 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Feb 2 10:32:06 stt300 NetworkManager[2610]: <info> Config: set interface ap_scan to 1 Feb 2 10:32:06 stt300 NetworkManager[2610]: <info> (wlan0): supplicant interface state: inactive -> scanning Feb 2 10:32:31 stt300 NetworkManager[2610]: <warn> Activation (wlan0/wireless): association took too long. Feb 2 10:32:31 stt300 NetworkManager[2610]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0] Feb 2 10:32:31 stt300 NetworkManager[2610]: <warn> Activation (wlan0/wireless): asking for new secrets Feb 2 10:32:31 stt300 NetworkManager[2610]: <warn> Couldn't disconnect supplicant interface: This interface is not connected. Feb 2 10:32:31 stt300 NetworkManager[2610]: <warn> Couldn't disconnect supplicant interface: This interface is not connected. Feb 2 10:32:36 stt300 NetworkManager[2610]: <info> (wlan0): supplicant interface state: scanning -> inactive Feb 2 10:32:38 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Feb 2 10:32:38 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Feb 2 10:32:38 stt300 NetworkManager[2610]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0] Feb 2 10:32:38 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Feb 2 10:32:38 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Feb 2 10:32:38 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Feb 2 10:32:38 stt300 NetworkManager[2610]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0] Feb 2 10:32:38 stt300 NetworkManager[2610]: <info> Activation (wlan0/wireless): connection 'WLAN_0DED' has security, and secrets exist. No new secrets needed. Feb 2 10:32:38 stt300 NetworkManager[2610]: <info> Config: added 'ssid' value 'WLAN_0DED' Feb 2 10:32:38 stt300 NetworkManager[2610]: <info> Config: added 'scan_ssid' value '1' Feb 2 10:32:38 stt300 NetworkManager[2610]: <info> Config: added 'key_mgmt' value 'WPA-PSK' Feb 2 10:32:38 stt300 NetworkManager[2610]: <info> Config: added 'psk' value '<omitted>' Feb 2 10:32:38 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Feb 2 10:32:38 stt300 NetworkManager[2610]: <info> Config: set interface ap_scan to 1 Feb 2 10:32:38 stt300 NetworkManager[2610]: <info> (wlan0): supplicant interface state: inactive -> scanning Feb 2 10:33:03 stt300 NetworkManager[2610]: <warn> Activation (wlan0/wireless): association took too long. Feb 2 10:33:03 stt300 NetworkManager[2610]: <info> (wlan0): device state change: config -> failed (reason 'no-secrets') [50 120 7] Feb 2 10:33:03 stt300 NetworkManager[2610]: <warn> Activation (wlan0) failed for access point (WLAN_0DED) Feb 2 10:33:03 stt300 NetworkManager[2610]: <info> Marking connection 'WLAN_0DED' invalid. Feb 2 10:33:03 stt300 NetworkManager[2610]: <warn> Activation (wlan0) failed. Feb 2 10:33:03 stt300 NetworkManager[2610]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0] Feb 2 10:33:03 stt300 NetworkManager[2610]: <info> (wlan0): deactivating device (reason 'none') [0] Feb 2 10:33:03 stt300 NetworkManager[2610]: <warn> Couldn't disconnect supplicant interface: This interface is not connected. Feb 2 10:33:03 stt300 NetworkManager[2610]: <warn> Couldn't disconnect supplicant interface: This interface is not connected. Feb 2 10:33:07 stt300 NetworkManager[2610]: <info> (wlan0): supplicant interface state: scanning -> inactive
Feb 2 10:34:34 stt300 kernel: [ 2400.860097] usb 1-1: new high-speed USB device number 4 using ehci_hcd Feb 2 10:34:34 stt300 kernel: [ 2401.009646] usb 1-1: New USB device found, idVendor=148f, idProduct=2870 Feb 2 10:34:34 stt300 kernel: [ 2401.009660] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Feb 2 10:34:34 stt300 kernel: [ 2401.009670] usb 1-1: Product: 802.11 n WLAN Feb 2 10:34:34 stt300 kernel: [ 2401.009678] usb 1-1: Manufacturer: Ralink Feb 2 10:34:34 stt300 kernel: [ 2401.009686] usb 1-1: SerialNumber: 1.0 Feb 2 10:34:34 stt300 kernel: [ 2401.124113] usb 1-1: reset high-speed USB device number 4 using ehci_hcd Feb 2 10:34:34 stt300 kernel: [ 2401.296589] ieee80211 phy3: Selected rate control algorithm 'minstrel_ht' Feb 2 10:34:34 stt300 wpa_supplicant[2711]: rfkill: WLAN unblocked Feb 2 10:34:34 stt300 kernel: [ 2401.301536] Registered led device: rt2800usb-phy3::radio Feb 2 10:34:34 stt300 kernel: [ 2401.301896] Registered led device: rt2800usb-phy3::assoc Feb 2 10:34:34 stt300 kernel: [ 2401.302271] Registered led device: rt2800usb-phy3::quality Feb 2 10:34:34 stt300 mtp-probe: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1" Feb 2 10:34:34 stt300 mtp-probe: bus: 1, device: 4 was not an MTP device Feb 2 10:34:34 stt300 NetworkManager[2610]: <info> found WiFi radio killswitch rfkill4 (at /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/ieee80211/phy3/rfkill4) (driver (unknown)) Feb 2 10:34:34 stt300 NetworkManager[2610]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/net/wlan2, iface: wlan2) Feb 2 10:34:34 stt300 NetworkManager[2610]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/net/wlan2, iface: wlan2): no ifupdown configuration found. Feb 2 10:34:34 stt300 NetworkManager[2610]: <info> (wlan2): using nl80211 for WiFi device control Feb 2 10:34:34 stt300 NetworkManager[2610]: <warn> (wlan2): driver supports Access Point (AP) mode Feb 2 10:34:34 stt300 NetworkManager[2610]: <info> (wlan2): new 802.11 WiFi device (driver: 'rt2800usb' ifindex: 6) Feb 2 10:34:34 stt300 NetworkManager[2610]: <info> (wlan2): exported as /org/freedesktop/NetworkManager/Devices/4 Feb 2 10:34:34 stt300 NetworkManager[2610]: <info> (wlan2): now managed Feb 2 10:34:34 stt300 NetworkManager[2610]: <info> (wlan2): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Feb 2 10:34:34 stt300 NetworkManager[2610]: <info> (wlan2): bringing up device. Feb 2 10:34:34 stt300 kernel: [ 2401.453832] rt2800usb 1-1:1.0: firmware: agent loaded rt2870.bin into memory Feb 2 10:34:35 stt300 NetworkManager[2610]: <info> (wlan2): preparing device. Feb 2 10:34:35 stt300 NetworkManager[2610]: <info> (wlan2): deactivating device (reason 'managed') [2] Feb 2 10:34:35 stt300 kernel: [ 2401.660805] ADDRCONF(NETDEV_UP): wlan2: link is not ready Feb 2 10:34:35 stt300 NetworkManager[2610]: <info> (wlan2): supplicant interface state: starting -> ready Feb 2 10:34:35 stt300 NetworkManager[2610]: <info> (wlan2): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42] Feb 2 10:34:35 stt300 NetworkManager[2610]: <info> (wlan2): supplicant interface state: ready -> inactive Feb 2 10:34:35 stt300 NetworkManager[2610]: <warn> Trying to remove a non-existant call id. Feb 2 10:34:50 stt300 NetworkManager[2610]: <info> Activation (wlan0) starting connection 'WLAN_0DED' Feb 2 10:34:50 stt300 NetworkManager[2610]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0] Feb 2 10:34:50 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Feb 2 10:34:50 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Feb 2 10:34:50 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Feb 2 10:34:50 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Feb 2 10:34:50 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Feb 2 10:34:50 stt300 NetworkManager[2610]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0] Feb 2 10:34:50 stt300 NetworkManager[2610]: <info> Activation (wlan0/wireless): access point 'WLAN_0DED' has security, but secrets are required. Feb 2 10:34:50 stt300 NetworkManager[2610]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0] Feb 2 10:34:50 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Feb 2 10:34:52 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Feb 2 10:34:52 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Feb 2 10:34:52 stt300 NetworkManager[2610]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0] Feb 2 10:34:52 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Feb 2 10:34:52 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Feb 2 10:34:52 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Feb 2 10:34:52 stt300 NetworkManager[2610]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0] Feb 2 10:34:52 stt300 NetworkManager[2610]: <info> Activation (wlan0/wireless): connection 'WLAN_0DED' has security, and secrets exist. No new secrets needed. Feb 2 10:34:52 stt300 NetworkManager[2610]: <info> Config: added 'ssid' value 'WLAN_0DED' Feb 2 10:34:52 stt300 NetworkManager[2610]: <info> Config: added 'scan_ssid' value '1' Feb 2 10:34:52 stt300 NetworkManager[2610]: <info> Config: added 'key_mgmt' value 'WPA-PSK' Feb 2 10:34:52 stt300 NetworkManager[2610]: <info> Config: added 'psk' value '<omitted>' Feb 2 10:34:52 stt300 NetworkManager[2610]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Feb 2 10:34:52 stt300 NetworkManager[2610]: <info> Config: set interface ap_scan to 1 Feb 2 10:34:52 stt300 NetworkManager[2610]: <info> (wlan0): supplicant interface state: inactive -> scanning Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Auto-activating connection 'WLAN_0DED automática'. Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Activation (wlan2) starting connection 'WLAN_0DED automática' Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> (wlan2): device state change: disconnected -> prepare (reason 'none') [30 40 0] Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Activation (wlan2/wireless): access point 'WLAN_0DED automática' has security, but secrets are required. Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> (wlan2): device state change: config -> need-auth (reason 'none') [50 60 0] Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> (wlan2): device state change: need-auth -> prepare (reason 'none') [60 40 0] Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Activation (wlan2/wireless): connection 'WLAN_0DED automática' has security, and secrets exist. No new secrets needed. Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Config: added 'ssid' value 'WLAN_0DED' Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Config: added 'scan_ssid' value '1' Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Config: added 'key_mgmt' value 'WPA-PSK' Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Config: added 'auth_alg' value 'OPEN' Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Config: added 'psk' value '<omitted>' Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> Config: set interface ap_scan to 1 Feb 2 10:34:56 stt300 NetworkManager[2610]: <info> (wlan2): supplicant interface state: inactive -> scanning Feb 2 10:34:58 stt300 wpa_supplicant[2711]: wlan2: SME: Trying to authenticate with 00:1a:2b:8b:09:aa (SSID='WLAN_0DED' freq=2442 MHz) Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> (wlan2): supplicant interface state: scanning -> authenticating Feb 2 10:34:58 stt300 kernel: [ 2424.708429] wlan2: authenticate with 00:1a:2b:8b:09:aa (try 1) Feb 2 10:34:58 stt300 kernel: [ 2424.711883] wlan2: authenticated Feb 2 10:34:58 stt300 wpa_supplicant[2711]: wlan2: Trying to associate with 00:1a:2b:8b:09:aa (SSID='WLAN_0DED' freq=2442 MHz) Feb 2 10:34:58 stt300 kernel: [ 2424.712905] wlan2: associate with 00:1a:2b:8b:09:aa (try 1) Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> (wlan2): supplicant interface state: authenticating -> associating Feb 2 10:34:58 stt300 kernel: [ 2424.716374] wlan2: RX AssocResp from 00:1a:2b:8b:09:aa (capab=0x411 status=0 aid=1) Feb 2 10:34:58 stt300 kernel: [ 2424.716385] wlan2: associated Feb 2 10:34:58 stt300 wpa_supplicant[2711]: wlan2: Associated with 00:1a:2b:8b:09:aa Feb 2 10:34:58 stt300 kernel: [ 2424.748185] ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> (wlan2): supplicant interface state: associating -> associated Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> (wlan2): supplicant interface state: associated -> 4-way handshake Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> (wlan2): supplicant interface state: 4-way handshake -> group handshake Feb 2 10:34:58 stt300 wpa_supplicant[2711]: wlan2: WPA: Key negotiation completed with 00:1a:2b:8b:09:aa [PTK=CCMP GTK=TKIP] Feb 2 10:34:58 stt300 wpa_supplicant[2711]: wlan2: CTRL-EVENT-CONNECTED - Connection to 00:1a:2b:8b:09:aa completed (auth) [id=0 id_str=] Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> (wlan2): supplicant interface state: group handshake -> completed Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> Activation (wlan2/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'WLAN_0DED'. Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> Activation (wlan2) Stage 3 of 5 (IP Configure Start) scheduled. Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> Activation (wlan2) Stage 3 of 5 (IP Configure Start) started... Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> (wlan2): device state change: config -> ip-config (reason 'none') [50 70 0] Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> Activation (wlan2) Beginning DHCPv4 transaction (timeout in 45 seconds) Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> dhclient started with pid 3986 Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> Activation (wlan2) Beginning IP6 addrconf. Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> Activation (wlan2) Stage 3 of 5 (IP Configure Start) complete. Feb 2 10:34:58 stt300 dhclient: Internet Systems Consortium DHCP Client 4.2.2 Feb 2 10:34:58 stt300 dhclient: Copyright 2004-2011 Internet Systems Consortium. Feb 2 10:34:58 stt300 dhclient: All rights reserved. Feb 2 10:34:58 stt300 dhclient: For info, please visit https://www.isc.org/software/dhcp/ Feb 2 10:34:58 stt300 dhclient: Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> (wlan2): DHCPv4 state changed nbi -> preinit Feb 2 10:34:58 stt300 dhclient: Listening on LPF/wlan2/00:1f:cf:52:63:df Feb 2 10:34:58 stt300 dhclient: Sending on LPF/wlan2/00:1f:cf:52:63:df Feb 2 10:34:58 stt300 dhclient: Sending on Socket/fallback Feb 2 10:34:58 stt300 dhclient: DHCPREQUEST on wlan2 to 255.255.255.255 port 67 Feb 2 10:34:58 stt300 dhclient: DHCPACK from 192.168.0.96 Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> (wlan2): DHCPv4 state changed preinit -> reboot Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> address 192.168.0.157 Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> prefix 24 (255.255.255.0) Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> gateway 192.168.0.96 Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> nameserver '80.58.61.250' Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> nameserver '80.58.61.254' Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> Activation (wlan2) Stage 5 of 5 (IPv4 Configure Commit) scheduled... Feb 2 10:34:58 stt300 NetworkManager[2610]: <info> Activation (wlan2) Stage 5 of 5 (IPv4 Commit) started... Feb 2 10:34:58 stt300 avahi-daemon[2571]: Joining mDNS multicast group on interface wlan2.IPv4 with address 192.168.0.157. Feb 2 10:34:58 stt300 avahi-daemon[2571]: New relevant interface wlan2.IPv4 for mDNS. Feb 2 10:34:58 stt300 avahi-daemon[2571]: Registering new address record for 192.168.0.157 on wlan2.IPv4. Feb 2 10:34:58 stt300 dhclient: bound to 192.168.0.157 -- renewal in 35038 seconds. Feb 2 10:34:59 stt300 NetworkManager[2610]: <info> (wlan2): device state change: ip-config -> activated (reason 'none') [70 100 0] Feb 2 10:35:00 stt300 NetworkManager[2610]: <info> Policy set 'WLAN_0DED automática' (wlan2) as default for IPv4 routing and DNS. Feb 2 10:35:00 stt300 NetworkManager[2610]: <info> Activation (wlan2) successful, device activated. Feb 2 10:35:00 stt300 NetworkManager[2610]: <info> Activation (wlan2) Stage 5 of 5 (IPv4 Commit) complete. Feb 2 10:35:00 stt300 dbus[2281]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Feb 2 10:35:00 stt300 dbus[2281]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Feb 2 10:35:00 stt300 avahi-daemon[2571]: Joining mDNS multicast group on interface wlan2.IPv6 with address fe80::21f:cfff:fe52:63df. Feb 2 10:35:00 stt300 avahi-daemon[2571]: New relevant interface wlan2.IPv6 for mDNS. Feb 2 10:35:00 stt300 avahi-daemon[2571]: Registering new address record for fe80::21f:cfff:fe52:63df on wlan2.*. Feb 2 10:35:01 stt300 ntpd[2517]: Listen normally on 9 wlan2 192.168.0.157 UDP 123 Feb 2 10:35:01 stt300 ntpd[2517]: Listen normally on 10 wlan2 fe80::21f:cfff:fe52:63df UDP 123 Feb 2 10:35:01 stt300 ntpd[2517]: peers refreshed Feb 2 10:35:09 stt300 kernel: [ 2435.824075] wlan2: no IPv6 routers present Feb 2 10:35:17 stt300 NetworkManager[2610]: <warn> Activation (wlan0/wireless): association took too long. Feb 2 10:35:17 stt300 NetworkManager[2610]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0] Feb 2 10:35:17 stt300 NetworkManager[2610]: <warn> Activation (wlan0/wireless): asking for new secrets Feb 2 10:35:17 stt300 NetworkManager[2610]: <warn> Couldn't disconnect supplicant interface: This interface is not connected. Feb 2 10:35:17 stt300 NetworkManager[2610]: <warn> Couldn't disconnect supplicant interface: This interface is not connected. Feb 2 10:35:18 stt300 NetworkManager[2610]: <info> (wlan2): IP6 addrconf timed out or failed. Feb 2 10:35:18 stt300 NetworkManager[2610]: <info> Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... Feb 2 10:35:18 stt300 NetworkManager[2610]: <info> Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) started... Feb 2 10:35:18 stt300 NetworkManager[2610]: <info> Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) complete
