Package: src:linux
Version: 3.2.32-1
Severity: important
File: linux-image-3.2.0-4-amd
Dear Maintainer,
I recently did an apt-get upgrade and upgrade from linux-image 320-3 to 320-4
in this update my backlight adjustment stopped working. It is impossible
to use software (kde) or keyboard shortcuts to adjust the backlight.
The backlight is perpetually at max now.
I rebooted and used grub to book the old kernel and confirmed that backlight
adjustment works properly in the debian v3 kernel.
The main difference between the kernels in dmesg is that in the broken
kernel this line becomes visible;
[ 3.708272] samsung_laptop: enabled workaround for brightness stepping
quirk
Other possibly relevant line from dmesg;
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD.
900X3C/900X4C/900X4D/SAMSUNG_NP1234567890, BIOS P00AAC 04/03/2012
and as mentioned this is a samsung series 9 laptop (a couple of months old)
Also possibly relevant info is that other keyboard shortcuts still work, things
like
adjusting the sound level or enable/disable the touch-pad.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version 4.6.3
(Debian 4.6.3-12) ) #1 SMP Debian 3.2.32-1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=02a4fc3d-25c8-4e18-9f98-f888d7107d4c ro quiet
** Not tainted
** Kernel log:
[ 3.701416] iTCO_wdt: Found a Panther Point TCO device (Version=2,
TCOBASE=0x0460)
[ 3.701482] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.701523] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 3.708272] samsung_laptop: enabled workaround for brightness stepping quirk
[ 3.715133] Bluetooth: Core ver 2.16
[ 3.715151] NET: Registered protocol family 31
[ 3.715154] Bluetooth: HCI device and connection manager initialized
[ 3.715157] Bluetooth: HCI socket layer initialized
[ 3.715159] Bluetooth: L2CAP socket layer initialized
[ 3.715164] Bluetooth: SCO socket layer initialized
[ 3.725296] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 3.725446] usbcore: registered new interface driver btusb
[ 3.728633] i915 0000:00:02.0: setting latency timer to 64
[ 3.739042] cfg80211: Calling CRDA to update world regulatory domain
[ 3.780218] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 3.780221] Copyright(c) 2003-2011 Intel Corporation
[ 3.780418] iwlwifi 0000:01:00.0: setting latency timer to 64
[ 3.780467] iwlwifi 0000:01:00.0: pci_resource_len = 0x00002000
[ 3.780470] iwlwifi 0000:01:00.0: pci_resource_base = ffffc9000067c000
[ 3.780472] iwlwifi 0000:01:00.0: HW Revision ID = 0x24
[ 3.781558] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 3.781566] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.781568] [drm] Driver supports precise vblank timestamp query.
[ 3.781950] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.783874] iwlwifi 0000:01:00.0: irq 47 for MSI/MSI-X
[ 3.783975] iwlwifi 0000:01:00.0: Detected 6035 Series 2x2 AGN/BT, REV=0xB0
[ 3.784091] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 3.787506] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 3.800325] iwlwifi 0000:01:00.0: device EEPROM VER=0x756, CALIB=0x6
[ 3.800329] iwlwifi 0000:01:00.0: Device SKU: 0X1f0
[ 3.800332] iwlwifi 0000:01:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
[ 3.800647] iwlwifi 0000:01:00.0: Tunable channels: 13 802.11bg, 24 802.11a
channels
[ 3.828302] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1
[ 3.828542] Registered led device: phy0-led
[ 3.832805] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 3.842576] cfg80211: World regulatory domain updated:
[ 3.842578] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 3.842581] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 3.842583] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 3.842585] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 3.842587] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 3.842589] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 3.861241] Linux media interface: v0.10
[ 3.870009] Linux video capture interface: v2.00
[ 3.872232] uvcvideo: Found UVC 1.00 device Webcam SC-13HDL11624N (2232:1024)
[ 3.955682] input: Webcam SC-13HDL11624N as
/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input6
[ 3.956025] usbcore: registered new interface driver uvcvideo
[ 3.956040] USB Video Class driver (1.1.1)
[ 3.991878] psmouse serio1: elantech: assuming hardware version 4 (with
firmware version 0x361f03)
[ 4.028907] psmouse serio1: elantech: Synaptics capabilities query result
0x40, 0x14, 0x0d.
[ 4.111771] input: ETPS/2 Elantech Touchpad as
/devices/platform/i8042/serio1/input/input7
[ 5.917614] fbcon: inteldrmfb (fb0) is primary device
[ 6.779273] Console: switching to colour frame buffer device 200x56
[ 6.792387] fb0: inteldrmfb frame buffer device
[ 6.792391] drm: registered panic notifier
[ 6.795221] acpi device:39: registered as cooling_device9
[ 6.795505] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 6.795602] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.795662] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.795798] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 6.795873] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 7.354292] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 7.354570] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.354795] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.354849] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.922773] Adding 4101116k swap on /dev/sda3. Priority:-1 extents:1
across:4101116k SS
[ 7.953335] EXT4-fs (sda4): re-mounted. Opts: (null)
[ 8.031448] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[ 8.075649] loop: module loaded
[ 9.250421] RPC: Registered named UNIX socket transport module.
[ 9.250429] RPC: Registered udp transport module.
[ 9.250433] RPC: Registered tcp transport module.
[ 9.250437] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.260831] FS-Cache: Loaded
[ 9.271945] FS-Cache: Netfs 'nfs' registered for caching
[ 9.279543] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 10.177979] Bluetooth: RFCOMM TTY layer initialized
[ 10.177984] Bluetooth: RFCOMM socket layer initialized
[ 10.177986] Bluetooth: RFCOMM ver 1.11
[ 10.181353] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.181357] Bluetooth: BNEP filters: protocol multicast
[ 10.261689] lp: driver loaded but no devices found
[ 10.267899] ppdev: user-space parallel port driver
[ 10.351561] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 10.358059] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[ 10.651430] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 10.657976] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
[ 10.772577] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.881191] r8169 0000:02:00.0: eth0: link down
[ 10.882101] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.963664] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input12
[ 26.538286] wlan0: authenticate with 28:10:7b:30:36:c4 (try 1)
[ 26.540265] wlan0: authenticated
[ 26.546943] wlan0: associate with 28:10:7b:30:36:c4 (try 1)
[ 26.552771] wlan0: RX AssocResp from 28:10:7b:30:36:c4 (capab=0x431 status=0
aid=1)
[ 26.552780] wlan0: associated
[ 26.552787] wlan0: No basic rates in AssocResp. Using min supported rate
instead.
[ 26.561297] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 36.188909] iwlwifi 0000:01:00.0: Tx aggregation enabled on ra =
28:10:7b:30:36:c4 tid = 0
[ 37.320581] wlan0: no IPv6 routers present
** Model information
sys_vendor: SAMSUNG ELECTRONICS CO., LTD.
product_name: 900X3C/900X4C/900X4D
product_version: 0.1
chassis_vendor: SAMSUNG ELECTRONICS CO., LTD.
chassis_version: 0.1
bios_vendor: Phoenix Technologies Ltd.
bios_version: P00AAC
board_vendor: SAMSUNG ELECTRONICS CO., LTD.
board_name: SAMSUNG_NP1234567890
board_version: FAB1
** Loaded modules:
parport_pc
ppdev
lp
parport
bnep
rfcomm
uinput
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
snd_hda_codec_hdmi
snd_hda_codec_realtek
joydev
uvcvideo
videodev
v4l2_compat_ioctl32
media
arc4
coretemp
crc32c_intel
ghash_clmulni_intel
iwlwifi
aesni_intel
snd_hda_intel
snd_hda_codec
mac80211
snd_hwdep
cfg80211
snd_pcm
snd_page_alloc
i915
snd_seq
btusb
aes_x86_64
snd_seq_device
bluetooth
snd_timer
aes_generic
evdev
cryptd
samsung_laptop
drm_kms_helper
psmouse
pcspkr
iTCO_wdt
snd
rfkill
drm
iTCO_vendor_support
serio_raw
i2c_i801
soundcore
i2c_algo_bit
i2c_core
battery
acpi_cpufreq
video
mperf
processor
button
ac
power_supply
ext4
crc16
jbd2
mbcache
usbhid
hid
sg
sd_mod
crc_t10dif
xhci_hcd
ahci
libahci
libata
r8169
mii
thermal
scsi_mod
fan
thermal_sys
ehci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM
Controller [8086:0154] (rev 09)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core
processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series
Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0705000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset
Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at f0700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f0600000-f06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Prefetchable memory behind bridge: 00000000f0400000-00000000f04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 5 [8086:1e18] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f0500000-f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f0709000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation HM75 Express Chipset LPC
Controller [8086:1e5d] (rev 04)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family
6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 46
Region 0: I/O ports at 3088 [size=8]
Region 1: I/O ports at 3094 [size=4]
Region 2: I/O ports at 3080 [size=8]
Region 3: I/O ports at 3090 [size=4]
Region 4: I/O ports at 3060 [size=32]
Region 5: Memory at f0708000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family
SMBus Controller [8086:1e22] (rev 04)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f0704000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
01:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6235
[8086:088e] (rev 24)
Subsystem: Intel Corporation Centrino Advanced-N 6235 AGN [8086:4060]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f0600000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: Samsung Electronics Co Ltd Device [144d:c0d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at f0404000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0400000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:00.0 USB controller [0c03]: Renesas Technology Corp. Device [1912:0015] (rev
02) (prog-if 30 [XHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c0cd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
** USB devices:
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 8087:07da Intel Corp.
Bus 001 Device 004: ID 2232:1024
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.46
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.1
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-23
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.36
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36
pn xen-hypervisor <none>
-- debconf information excluded
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
