Package: installation-reports Boot method: <How did you boot the installer? CD? floppy? network?> USB Image version: <Full URL to image you downloaded is best> http://cdimage.debian.org/cdimage/wheezy_di_beta3/amd64/iso-cd/debian-wheezy-DI-b3-amd64-netinst.iso Date: <Date and time of the install> Nov 04, 2012
Machine: <Description of machine (eg, IBM Thinkpad R32)> Assembled
Machine with ASUS mother board
Processor: AMP
Sempron 1GHz
Memory: 1GB
Partitions: <df -Tl will do; the raw partition table is preferred> 500GB
HDD with 160GB partitioned for root /
Filesystem Type 1K-blocks
Used Available Use% Mounted on
rootfs rootfs 163199520
5997792 148911388 4% /
udev devtmpfs 10240
0 10240 0% /dev
tmpfs tmpfs 89536
628 88908 1% /run
/dev/disk/by-uuid/f496b538-7099-45bc-8cf7-956acdf19ee9 ext4 163199520
5997792 148911388 4% /
tmpfs tmpfs 5120
0 5120 0% /run/lock
tmpfs tmpfs 222420
88 222332 1% /run/shm
/dev/sda5 fuseblk 46829440
10345948 36483492 23% /media/KRISHNA
/dev/sda7 fuseblk 50050472
14111480 35938992 29% /media/KRISHNA_
/dev/sda9 fuseblk 75152036
41163364 33988672 55% /media/KRISHNA__
/dev/sda8 fuseblk 150328204
32220356 118107848 22% /media/KRISHNA___
Output of lspci -knn (or lspci -nn):
root@gml:~# lspci -knn
00:00.0 RAM memory [0500]: NVIDIA Corporation MCP61 Memory Controller
[10de:03ea] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8234]
00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP61 LPC Bridge [10de:03e0] (rev
a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:8234]
00:01.1 SMBus [0c05]: NVIDIA Corporation MCP61 SMBus [10de:03eb] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:8234]
Kernel driver in use: nForce2_smbus
00:01.2 RAM memory [0500]: NVIDIA Corporation MCP61 Memory Controller
[10de:03f5] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:8234]
00:02.0 USB controller [0c03]: NVIDIA Corporation MCP61 USB 1.1 Controller
[10de:03f1] (rev a3)
Subsystem: ASUSTeK Computer Inc. Device [1043:8234]
Kernel driver in use: ohci_hcd
00:02.1 USB controller [0c03]: NVIDIA Corporation MCP61 USB 2.0 Controller
[10de:03f2] (rev a3)
Subsystem: ASUSTeK Computer Inc. Device [1043:8234]
Kernel driver in use: ehci_hcd
00:04.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI bridge [10de:03f3] (rev
a1)
00:05.0 Audio device [0403]: NVIDIA Corporation MCP61 High Definition Audio
[10de:03f0] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:8290]
Kernel driver in use: snd_hda_intel
00:06.0 IDE interface [0101]: NVIDIA Corporation MCP61 IDE [10de:03ec] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:8234]
Kernel driver in use: pata_amd
00:07.0 Bridge [0680]: NVIDIA Corporation MCP61 Ethernet [10de:03ef] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:8234]
Kernel driver in use: forcedeth
00:08.0 IDE interface [0101]: NVIDIA Corporation MCP61 SATA Controller
[10de:03f6] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:8234]
Kernel driver in use: sata_nv
00:09.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge
[10de:03e8] (rev a2)
Kernel driver in use: pcieport
00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge
[10de:03e9] (rev a2)
Kernel driver in use: pcieport
00:0c.0 PCI bridge [0604]: NVIDIA Corporation MCP61 PCI Express bridge
[10de:03e9] (rev a2)
Kernel driver in use: pcieport
00:0d.0 VGA compatible controller [0300]: NVIDIA Corporation C61 [GeForce
6150SE nForce 430] [10de:03d0] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:8234]
Kernel driver in use: nouveau
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Kernel driver in use: k8temp
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [ ]-NO CD-drive in the system
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]-Why should you erase the old system? It took
nearly 6 hours to erase 160GB. Is there any way to avoid it?
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
I had to do the installation twice as the first install went in to the USB
stick.
Some indication to user that may avoid such a mistake would be better.
There should be one selection for root partition and it should be confirmed.
Rest of the task should happen automatically.
I had read somewhere that the default desktop environment is xfce. It turned
out to be gnome. Is is intentional?
<<attachment: krishna.vcf>>
