Here is the information that 2.6.10 put into the log file:
1 jcc02003-hawk kernel: Linux Kernel Card Services
1 jcc02003-hawk kernel: options: [pci] [cardbus] [pm]
1 jcc02003-hawk kernel: Yenta: CardBus bridge found at 0000:00:07.0
[0000:0000]
1 jcc02003-hawk kernel: Yenta: Enabling burst memory read
transactions
2 jcc02003-hawk kernel: Yenta: Using CSCINT to route CSC interrupts
to PCI
2 jcc02003-hawk kernel: Yenta: Routing CardBus interrupts to PCI
1 jcc02003-hawk kernel: Yenta TI: socket 0000:00:07.0, mfunc
0x0ba43822, devctl 0x62
1 jcc02003-hawk kernel: Yenta: ISA IRQ mask 0x0010, PCI irq 10
2 jcc02003-hawk kernel: Socket status: 30000010
1 jcc02003-hawk kernel: Yenta: CardBus bridge found at 0000:00:07.1
[0000:0000]
1 jcc02003-hawk kernel: Yenta TI: socket 0000:00:07.1, mfunc
0x0ba43822, devctl 0x62
1 jcc02003-hawk kernel: irq 10: nobody cared!
1 jcc02003-hawk kernel: [__report_bad_irq+49/119]
__report_bad_irq+0x31/0x77
1 jcc02003-hawk kernel: [note_interrupt+76/113]
note_interrupt+0x4c/0x71
1 jcc02003-hawk kernel: [__do_IRQ+201/265] __do_IRQ+0xc9/0x109
1 jcc02003-hawk kernel: [do_IRQ+25/36] do_IRQ+0x19/0x24
2 jcc02003-hawk kernel: [common_interrupt+26/32]
common_interrupt+0x1a/0x20
1 jcc02003-hawk kernel: [__do_softirq+44/121] __do_softirq+0x2c/0x79
1 jcc02003-hawk kernel: [do_softirq+34/38] do_softirq+0x22/0x26
1 jcc02003-hawk kernel: [irq_exit+41/52] irq_exit+0x29/0x34
1 jcc02003-hawk kernel: [do_IRQ+30/36] do_IRQ+0x1e/0x24
1 jcc02003-hawk kernel: [msleep+33/53] msleep+0x21/0x35
1 jcc02003-hawk kernel: [pg0+140417944/1070044160]
yenta_probe_cb_irq+0xa7/0xe3 [yenta_socket]
1 jcc02003-hawk kernel: [pg0+140415792/1070044160]
ti12xx_irqroute_func1+0x73/0x1ce [yenta_socket]
1 jcc02003-hawk kernel: [pg0+140416393/1070044160]
ti12xx_override+0xfe/0x10c [yenta_socket]
1 jcc02003-hawk kernel: [pg0+140418614/1070044160]
yenta_probe+0x125/0x1e5 [yenta_socket]
1 jcc02003-hawk kernel: [pci_device_probe_static+46/65]
pci_device_probe_static+0x2e/0x41
1 jcc02003-hawk kernel: [__pci_device_probe+31/50]
__pci_device_probe+0x1f/0x32
1 jcc02003-hawk kernel: [pci_device_probe+28/49]
pci_device_probe+0x1c/0x31
1 jcc02003-hawk kernel: [driver_probe_device+54/84]
driver_probe_device+0x36/0x54
1 jcc02003-hawk kernel: [driver_attach+57/110]
driver_attach+0x39/0x6e
1 jcc02003-hawk kernel: [bus_add_driver+94/128]
bus_add_driver+0x5e/0x80
1 jcc02003-hawk kernel: [driver_register+45/49]
driver_register+0x2d/0x31
1 jcc02003-hawk kernel: [pci_register_driver+87/106]
pci_register_driver+0x57/0x6a
1 jcc02003-hawk kernel: [pg0+139866122/1070044160]
yenta_socket_init+0xa/0xc [yenta_socket]
1 jcc02003-hawk kernel: [sys_init_module+212/451]
sys_init_module+0xd4/0x1c3
1 jcc02003-hawk kernel: [syscall_call+7/11] syscall_call+0x7/0xb
1 jcc02003-hawk kernel: handlers:
1 jcc02003-hawk kernel: [pg0+140412663/1070044160]
(yenta_interrupt+0x0/0x27 [yenta_socket])
1 jcc02003-hawk kernel: Disabling IRQ #10
1 jcc02003-hawk kernel: Yenta TI: socket 0000:00:07.1 no PCI
interrupts. Fish. Please report.
1 jcc02003-hawk kernel: Yenta: ISA IRQ mask 0x0010, PCI irq 0
----------------
Thanks
Jefferson Cowart
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
