Package: capi4hylafax Version: 1:01.02.03-7 Severity: important I do not send faxes very often, so I don't know since when I have this problem.
Hylafax repeatedly sends the fax and always gets SEND INCOMPLETE. When it has reached the limit it tells that it could not send the fax. The receiving station has successfully received the document on every sending attempt. I'm not sure that it's caused by capi4hylafax. syslog extract: Feb 4 12:52:44 hedril FaxQueuer[4151]: JOB 56 (active dest +4940381xxxxx pri 127 tts 0:00 killtime 2:59:57): CMD START /usr/bin/c2faxsend -m faxCAPI sendq/q56 (PID 4176) Feb 4 12:52:44 hedril kernel: kcapi: appl 3 up [... more isdnlog messages ...] Feb 4 12:52:51 laren isdnlog: Feb 04 12:52:51 tei 84 calling +49 40/381xxxxx, Hamburg with +49 8862/98xxxxx, Steingaden Oberbay CONNECT (3.1 kHz audio) [... more isdnlog messages ...] Feb 4 12:52:51 hedril kernel: kcapi: appl 3 ncci 0x10101 up Feb 4 12:53:32 hedril kernel: kcapi: appl 3 ncci 0x10101 down Feb 4 12:53:33 laren isdnlog: Feb 04 12:53:33 tei 84 calling +49 40/381xxxxx, Hamburg with +49 8862/98xxxxx, Steingaden Oberbay Normal call clearing (User) [... more isdnlog messages] Feb 4 12:53:34 laren isdnlog: Feb 04 12:53:33 tei 84 calling +49 40/381xxxxx, Hamburg with +49 8862/98xxxxx, Steingaden Oberbay HANGUP (1 CI 0.027 EUR 0:00:42) Feb 4 12:53:33 hedril kernel: kcapi: appl 3 releasing(1) Feb 4 12:53:33 hedril kernel: kcapi: appl 3 down Feb 4 12:53:33 hedril FaxQueuer[4151]: JOB 56 (active dest +4940381xxxxx pri 127 tts 0:00 killtime 2:59:08): CMD DONE: exit status 0 Feb 4 12:53:33 hedril FaxQueuer[4151]: JOB 56 (sleeping dest +4940381xxxxx pri 126 tts 0:00 killtime 2:59:08): SEND INCOMPLETE: requeue for 7:13; Feb 4 12:53:33 hedril FaxQueuer[4151]: JOB 56 (sleeping dest +4940381xxxxx pri 126 tts 0:00 killtime 2:59:08): SLEEP FOR 7:13 /var/spool/hylafax/log/c00000103: (contents from a retry) Feb 04 13:08:51.04: [ 4256]: SESSION BEGIN 00000056 +49.8862.98xxxxx Feb 04 13:08:51.04: [ 4256]: SEND FAX: JOB 56 DEST 040381xxxxx COMMID 00000103 Feb 04 13:08:51.04: [ 4256]: Try to connect to fax number 040381xxxxx in Hylafax mode on controller 1. Feb 04 13:08:51.04: [ 4256]: Dial and starting transfer of TIFF-File docq/doc60.ps;01 with fine resolution. Feb 04 13:09:04.60: [ 4258]: Connection established. Feb 04 13:09:04.60: [ 4258]: StationID = +49 40 381xxxxx Feb 04 13:09:04.60: [ 4258]: BaudRate = 14400 Feb 04 13:09:04.60: [ 4258]: Flags = HighRes, MR_compr, MMR_compr Feb 04 13:09:22.22: [ 4258]: Page 1 was sended. - Last Page! Feb 04 13:09:23.55: [ 4258]: Fax file completely transfered to CAPI. Feb 04 13:09:39.48: [ 4258]: Connection dropped with Reason 0x3490 (Normal call clearing). Feb 04 13:09:39.48: [ 4256]: SESSION END The current version of c2faxsend doesn't seem to write anything into /var/spool/hylafax/log/capi4hylafax, I only found very old entries with "CapiFaxSend", current entries are all with "c2faxrecv". In config.faxCAPI I have LogTraceLevel: 4 What can I do to debug the problem? Bodo -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (900, 'testing'), (300, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.4.27-2-686-smp Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages capi4hylafax depends on: ii isdnactivecards 1:3.3.0.20041110-1 support for active ISDN cards and ii libc6 2.3.2.ds1-20 GNU C Library: Shared libraries an ii libcapi20-2 1:3.3.0.20041110-1 libraries for CAPI support ii libgcc1 1:3.4.3-6 GCC support library ii libstdc++5 1:3.3.5-5 The GNU Standard C++ Library v3 ii libtiff4 3.7.1-2 Tag Image File Format (TIFF) libra -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
