Verified problem does still exist with linux-image-3.5-trunk-amd64
from experimental.
$ uname -a
Linux dancer 3.5-trunk-amd64 #1 SMP Debian 3.5.5-1~experimental.1 x86_64
GNU/Linux
I'm still seeing flickering.
gnome-control-center still says the display is "Unknown".
"xrandr --verbose" output:
-------------------------------------------------------------------------
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 400, current 1600 x 1200, maximum 1920 x 1440
default connected 1600x1200+0+0 (0x13b) normal (normal) 0mm x 0mm
Identifier: 0x137
Timestamp: 40607
Subpixel: no subpixels
Clones:
CRTC: 0
CRTCs: 0
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
1920x1440 (0x138) 0.0MHz
h: width 1920 start 0 end 0 total 1920 skew 0 clock 0.0KHz
v: height 1440 start 0 end 0 total 1440 clock 0.0Hz
1856x1392 (0x139) 0.0MHz
h: width 1856 start 0 end 0 total 1856 skew 0 clock 0.0KHz
v: height 1392 start 0 end 0 total 1392 clock 0.0Hz
1792x1344 (0x13a) 0.0MHz
h: width 1792 start 0 end 0 total 1792 skew 0 clock 0.0KHz
v: height 1344 start 0 end 0 total 1344 clock 0.0Hz
1600x1200 (0x13b) 0.0MHz *current
h: width 1600 start 0 end 0 total 1600 skew 0 clock 0.0KHz
v: height 1200 start 0 end 0 total 1200 clock 0.0Hz
1280x1024 (0x13c) 0.0MHz
h: width 1280 start 0 end 0 total 1280 skew 0 clock 0.0KHz
v: height 1024 start 0 end 0 total 1024 clock 0.0Hz
1152x864 (0x13d) 0.0MHz
h: width 1152 start 0 end 0 total 1152 skew 0 clock 0.0KHz
v: height 864 start 0 end 0 total 864 clock 0.0Hz
1024x768 (0x13e) 0.0MHz
h: width 1024 start 0 end 0 total 1024 skew 0 clock 0.0KHz
v: height 768 start 0 end 0 total 768 clock 0.0Hz
800x600 (0x13f) 0.0MHz
h: width 800 start 0 end 0 total 800 skew 0 clock 0.0KHz
v: height 600 start 0 end 0 total 600 clock 0.0Hz
640x480 (0x140) 0.0MHz
h: width 640 start 0 end 0 total 640 skew 0 clock 0.0KHz
v: height 480 start 0 end 0 total 480 clock 0.0Hz
720x400 (0x141) 0.0MHz
h: width 720 start 0 end 0 total 720 skew 0 clock 0.0KHz
v: height 400 start 0 end 0 total 400 clock 0.0Hz
-------------------------------------------------------------------------
"get-edid 2>&1 | parse-edid > get-parse-edid.txt 2>&1" output:
-------------------------------------------------------------------------
parse-edid: parse-edid version 2.0.0
parse-edid: EDID checksum failed - data is corrupt. Continuing anyway.
parse-edid: first bytes don't match EDID version 1 header
parse-edid: do not trust output (if any).
# EDID version 32 revision 118
Section "Monitor"
Identifier "NQ@:6765"
VendorName "NQ@"
ModelName "NQ@:6765"
# DPMS capabilities: Active off:yes Suspend:yes Standby:no
Mode "1110x1568" # vfreq 17.559Hz, hfreq 33.766kHz
DotClock 82.930000
HTimings 1110 1218 1326 2456
VTimings 1568 1600 1626 1923
EndMode
Mode "884x888" # vfreq 335.422Hz, hfreq 314.290kHz
DotClock 287.890000
HTimings 884 916 1029 916
VTimings 888 943 967 937
EndMode
Mode "888x632" # vfreq 389.264Hz, hfreq 264.700kHz
DotClock 251.200000
HTimings 888 987 1107 949
VTimings 632 635 648 680
EndMode
Mode "1652x1902" # vfreq 16.831Hz, hfreq 45.478kHz
DotClock 254.540000
HTimings 1652 1769 1881 5597
VTimings 1902 1957 2005 2702
EndMode
EndSection
-------------------------------------------------------------------------
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
