Package: sl-modem-daemon Version: 2.9.11~20110321-8 Severity: important Dear Maintainer,
* What led up to the situation? Installing Debian Wheezy (testing) on a new HD. In Lenny the modem was working fine. It was used mostly as an answering machine. The packages sl-modem-daemon-daemon, sl-modem-dkms and sl-modem-source were installed. First, the wrong driver was loaded. This is the modem I have (per lspci): 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01) This page: http://wiki.debian.org/slmodem says slamr is the correct modem, instead snd-atiixp-modem was loaded. Per the instructions in reportbug, I changed SLMODEMD_DEVICE=slamr and tried again, but slamr doesn't load: modprobe: ../tools/modprobe.c:550: print_action: Assertion `kmod_module_get_initstate(m) == KMOD_MODULE_BUILTIN' failed. Aborted install /sbin/modprobe -qb ungrab-winmodem; /sbin/modprobe --ignore-install slamr; test -e /dev/slamr0 && (chmod 660 /dev/slamr0 && chgrp dialout /dev/slamr0) || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0) sl-modem-daemon start gives the following: Starting SmartLink Modem driver for: slamr. Creating /dev/modem symlink, pointing to: /dev/ttySL0. But lsmod shows no such driver, or ungrab-winmodem. Stopping: Shutting down SmartLink Modem driver normally ... no slmodemd daemon running. Unloading modem driver from kernel ... none found. After booting, it works even worse now. vgetty is respawing too quickly and stop claims that it's unloading snd-intel8x0m. So it looks like the SLMODEMD_DEVICE setting has no effect. At least with the snd-atiixp-modem the /dev/ttySL0 device was created and I once could get an OK out of the modem before it locked up kermit. Like I said, it looks like something doesn't agree with the new kernel way of doing things. Or have I missed a step? I'll test whatever you tell me to test. Thanks a bunch for maintaining this package. -- Package-specific info: Problem with dialup Problem with fax ============ /proc/version_signature =============== ============ /etc/default/sl-modem-daemon =============== # NOTE: settings in /etc/defautls/slmodemd are used too # set this to 1 to never run the daemon from the init script # you can set it if you have an USB device, than the init script won't # be started at boot (but when the USB device is plugged on) DONTSTART=0 # This is the default configuration for the slmodem driver daemon # running on Debian systems. # # Edit device node and country code here ... # # possible country codes are: # # USA # GERMANY # BELGIUM # etc. # # use 'slmodemd --countrylist' to check out other countries # # #SLMODEMD_DEVICE=slamr0 #SLMODEMD_COUNTRY=GERMANY #SLMODEMD_DEVICE=auto SLMODEMD_DEVICE=slamr SLMODEMD_COUNTRY=USA # # Additional options for slmodemd, see "slmodemd -h" output for details. # Do NOT set country or device name here! OPTS="" # force the start of the daemon even if old type modules seem to be # installed (set it to 1) FORCESTART=0 # set this to not see any hints of the init script on startup # BEQUIET=1 # set this to not create the /dev/modem symlink # NOSYMLINK=1 ============ /proc/asound/I82801DBICH4 =============== ============ /proc/asound/card0 =============== ============ /proc/asound/cards =============== 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 Intel 82801DB-ICH4 with STAC9750,51 at irq 5 ============ /proc/asound/devices =============== 1: : sequencer 5: [ 0- 4]: digital audio playback 6: [ 0- 3]: digital audio capture 7: [ 0- 2]: digital audio capture 8: [ 0- 1]: digital audio capture 9: [ 0- 0]: digital audio playback 10: [ 0- 0]: digital audio capture 11: [ 0] : control 33: : timer ============ /proc/asound/modules =============== 0 snd_intel8x0 ============ /proc/asound/oss =============== ============ /proc/asound/pcm =============== 00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1 00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1 00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1 00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1 00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1 ============ /proc/asound/seq =============== ============ /proc/asound/timers =============== G0: system timer : 4000.000us (10000000 ticks) P0-0-0: PCM playback 0-0-0 : SLAVE P0-0-1: PCM capture 0-0-1 : SLAVE P0-1-1: PCM capture 0-1-1 : SLAVE P0-2-1: PCM capture 0-2-1 : SLAVE P0-3-1: PCM capture 0-3-1 : SLAVE P0-4-0: PCM playback 0-4-0 : SLAVE ============ /proc/asound/version =============== Advanced Linux Sound Architecture Driver Version 1.0.24. ============ /var/log/slmodem.log =============== ============ lspci -vvnn =============== 00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O Controller [8086:3340] (rev 03) Subsystem: Dell Device [1028:016a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M] Capabilities: [e4] Vendor Specific Information: Len=04 <?> Capabilities: [a0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+ Rate=x4 Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP Controller [8086:3341] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fc000000-fdffffff Prefetchable memory behind bridge: f0000000-f3ffffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:1d.0 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:016a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 4: I/O ports at bf80 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:016a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at bf40 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:016a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 11 Region 4: I/O ports at bf20 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:016a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 11 Region 0: Memory at f4fffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+ Capabilities: [58] Debug port: BAR=1 offset=0080 Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 81) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=06, sec-latency=32 I/O behind bridge: 0000d000-0000efff Memory behind bridge: f6000000-fbffffff Prefetchable memory behind bridge: 84000000-87ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Dell Device [1028:016a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at bfa0 [size=16] Region 5: Memory at 80000000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: ata_piix 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01) Subsystem: Dell Device [1028:016a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 5 Region 0: I/O ports at b800 [size=256] Region 1: I/O ports at bc40 [size=64] Region 2: Memory at f4fff800 (32-bit, non-prefetchable) [size=512] Region 3: Memory at f4fff400 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: snd_intel8x0 00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 01) (prog-if 00 [Generic]) Subsystem: PCTel Inc Latitude D500 [134d:4c21] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 0: I/O ports at b400 [size=256] Region 1: I/O ports at b080 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV28 [GeForce4 Ti 4200 Go AGP 8x] [10de:0286] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:0179] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at f0000000 (32-bit, prefetchable) [size=64M] Expansion ROM at fd000000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 3.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+ Rate=x4 Kernel driver in use: nouveau 02:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401 100Base-T [14e4:4401] (rev 01) Subsystem: Dell Device [1028:8127] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 11 Region 0: Memory at faffe000 (32-bit, non-prefetchable) [size=8K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME- Kernel driver in use: b44 02:01.0 CardBus bridge [0607]: Texas Instruments PCI4510 PC card Cardbus Controller [104c:ac44] (rev 02) Subsystem: Dell Device [1028:016a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 Memory window 0: 84000000-87ffffff (prefetchable) Memory window 1: 88000000-8bffffff I/O window 0: 0000d400-0000d4ff I/O window 1: 0000d000-0000d0ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus 02:01.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCI4510 IEEE-1394 Controller [104c:8029] (prog-if 10 [OHCI]) Subsystem: Dell Device [1028:016a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at faffd800 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at faff8000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+ Kernel driver in use: firewire_ohci 02:03.0 Network controller [0280]: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter [8086:1043] (rev 04) Subsystem: Intel Corporation Device [8086:2565] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 5 Region 0: Memory at faffc000 (32-bit, non-prefetchable) [size=4K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- ============ lsmod =============== Module Size Used by ext3 133836 1 jbd 42496 1 ext3 usb_storage 35245 1 uas 13175 0 ip6table_filter 12492 0 ip6_tables 17185 1 ip6table_filter iptable_filter 12488 0 ip_tables 17079 1 iptable_filter ebtable_nat 12516 0 ebtables 17060 1 ebtable_nat x_tables 18092 5 ebtables,ip_tables,iptable_filter,ip6_tables,ip6table_filter ppdev 12651 0 lp 12797 0 bnep 17288 2 rfcomm 28412 0 bluetooth 99189 8 rfcomm,bnep ch7006 21549 1 nouveau 490603 2 mxm_wmi 12433 1 nouveau wmi 13051 1 mxm_wmi ttm 42957 1 nouveau drm_kms_helper 22699 2 nouveau,ch7006 drm 130103 5 drm_kms_helper,ttm,nouveau,ch7006 i2c_algo_bit 12713 1 nouveau i2c_core 19116 5 i2c_algo_bit,drm,drm_kms_helper,nouveau,ch7006 binfmt_misc 12778 1 uinput 12991 1 nfsd 173500 2 nfs 256619 0 nfs_acl 12463 2 nfs,nfsd auth_rpcgss 32012 2 nfs,nfsd fscache 27566 1 nfs lockd 57192 2 nfs,nfsd sunrpc 143211 6 lockd,auth_rpcgss,nfs_acl,nfs,nfsd nls_utf8 12416 1 nls_cp437 12417 1 vfat 17117 1 fat 40365 1 vfat loop 17851 0 joydev 12959 0 snd_intel8x0 22457 0 snd_ac97_codec 84245 1 snd_intel8x0 snd_pcm 53402 2 snd_ac97_codec,snd_intel8x0 snd_page_alloc 12867 2 snd_pcm,snd_intel8x0 ipw2100 63345 0 libipw 26059 1 ipw2100 lib80211 12950 1 libipw snd_seq 39764 0 cfg80211 117608 2 libipw,ipw2100 rfkill 18715 3 cfg80211,bluetooth snd_seq_device 13016 1 snd_seq iTCO_wdt 16945 0 snd_timer 22478 2 snd_seq,snd_pcm iTCO_vendor_support 12632 1 iTCO_wdt psmouse 59795 0 pcspkr 12554 0 serio_raw 12848 0 evdev 13175 6 yenta_socket 22402 0 rng_core 12580 0 dcdbas 13193 0 pcmcia_rsrc 17380 1 yenta_socket snd 38796 6 snd_timer,snd_seq_device,snd_seq,snd_pcm,snd_ac97_codec,snd_intel8x0 soundcore 12921 1 snd acpi_cpufreq 12745 0 ac97_bus 12462 1 snd_ac97_codec video 17412 1 nouveau irda 78967 0 crc_ccitt 12331 1 irda parport_pc 22036 1 mperf 12421 1 acpi_cpufreq parport 31375 3 parport_pc,lp,ppdev processor 23136 2 acpi_cpufreq button 12817 1 nouveau ac 12552 0 battery 12957 0 shpchp 26717 0 ext4 298051 4 crc16 12327 2 ext4,bluetooth jbd2 51542 1 ext4 mbcache 12897 2 ext4,ext3 dm_mod 57354 0 sg 21589 0 sr_mod 17468 0 sd_mod 35425 9 crc_t10dif 12332 1 sd_mod cdrom 34813 1 sr_mod ata_generic 12439 0 ata_piix 21296 6 libata 121219 2 ata_piix,ata_generic uhci_hcd 22506 0 thermal 13103 0 thermal_sys 17752 3 thermal,processor,video b44 23135 0 ssb 43403 1 b44 mmc_core 62122 1 ssb ehci_hcd 35684 0 firewire_ohci 26951 0 usbcore 100493 5 ehci_hcd,uhci_hcd,uas,usb_storage firewire_core 39034 1 firewire_ohci crc_itu_t 12331 1 firewire_core mii 12595 1 b44 pcmcia 32012 1 ssb pcmcia_core 18063 3 pcmcia,pcmcia_rsrc,yenta_socket scsi_mod 135629 6 libata,sd_mod,sr_mod,sg,uas,usb_storage usb_common 12338 1 usbcore ============ lsusb =============== Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 067b:2507 Prolific Technology, Inc. PL2507 Hi-speed USB to IDE bridge controller ============ ls -l /dev/ttySL* /dev/pts/* /dev/slamr* /dev/slusb* =============== c--------- 1 root root 5, 2 Oct 8 09:26 /dev/pts/ptmx crw-rw---- 1 root dialout 242, 0 Oct 8 15:40 /dev/slamr0 lrwxrwxrwx 1 root root 10 Oct 8 15:44 /dev/ttySL0 -> /dev/pts/0 -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 3.2.0-3-486 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages sl-modem-daemon depends on: ii adduser 3.113+nmu3 ii alsa-utils 1.0.25-3 ii debconf [debconf-2.0] 1.5.46 ii libasound2 1.0.25-4 ii libc6 2.13-35 sl-modem-daemon recommends no packages. sl-modem-daemon suggests no packages. Versions of packages sl-modem-daemon is related to: ii sl-modem-dkms 2.9.11~20110321-8 -- debconf information: * sl-modem-daemon/country: USA -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
