Package: k3b Version: 2.0.2-6 Severity: important Tags: upstream
-- Package-specific info: Device was not specified. Trying to find an appropriate drive... Detected CD-R drive: /dev/cdrw Using /dev/cdrom of unknown capabilities Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'Optiarc ' Identification : 'DVD RW AD-7173A ' Revision : '1-02' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.5.0 (SMP w/4 CPU cores; PREEMPT) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages k3b depends on: ii cdparanoia 3.10.2+debian-10.1 ii cdrdao 1:1.2.3-0.3 ii genisoimage 9:1.1.11-2 ii k3b-data 2.0.2-6 ii kde-runtime 4:4.8.4-1 ii libc6 2.13-35 ii libk3b6 2.0.2-6 ii libkcddb4 4:4.8.4-2 ii libkcmutils4 4:4.8.4-3 ii libkde3support4 4:4.8.4-3 ii libkdecore5 4:4.8.4-3 ii libkdeui5 4:4.8.4-3 ii libkfile4 4:4.8.4-3 ii libkio5 4:4.8.4-3 ii libknotifyconfig4 4:4.8.4-3 ii libqt4-qt3support 4:4.8.2+dfsg-2 ii libqt4-xml 4:4.8.2+dfsg-2 ii libqtcore4 4:4.8.2+dfsg-2 ii libqtgui4 4:4.8.2+dfsg-2 ii libqtwebkit4 2.2.1-4+b1 ii libsolid4 4:4.8.4-3 ii libstdc++6 4.7.1-7 ii wodim 9:1.1.11-2 Versions of packages k3b recommends: ii dvd+rw-tools 7.1-10 ii libk3b6-extracodecs 2.0.2-6 ii vcdimager 0.7.24-1+b1 Versions of packages k3b suggests: pn k3b-extrathemes <none> ii k3b-i18n 2.0.2-6 pn movixmaker-2 <none> pn normalize-audio <none> pn sox <none> -- no debconf information If you select "burn ISO-image", then after 10-15 seconds after recording starts an error: Programm cdrecord return unknown error (code 254) Debug output: Devices ----------------------- Optiarc DVD RW AD-7173A 1-02 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, Последовательный DVD-R, Двухслойный последовательный DVD-R, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW с ограниченной перезаписью, Последовательный DVD-RW, DVD+RW, DVD+R, Двухслойный DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96R, RAW/R96R, Ограниченная перезапись, Layer Jump] [%7] System ----------------------- K3b Version: 2.0.2 KDE Version: 4.8.4 (4.8.4) QT Version: 4.8.2 Kernel: 3.5.0 Used versions ----------------------- cdrecord: 1.1.11 cdrecord ----------------------- scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.11 SCSI buffer size: 64512 Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. TOC Type: 1 = CD-ROM Driveropts: 'burnfree' Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'Optiarc ' Identification : 'DVD RW AD-7173A ' Revision : '1-02' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 (CD-R) Profile: 0x002B (DVD+R/DL) Profile: 0x001B (DVD+R) Profile: 0x001A (DVD+RW) Profile: 0x0016 (DVD-R/DL layer jump recording) Profile: 0x0015 (DVD-R/DL sequential recording) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x0012 (DVD-RAM) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0010 (DVD-ROM) Profile: 0x000A (CD-RW) Profile: 0x0009 (CD-R) (current) Profile: 0x0008 (CD-ROM) (current) Profile: 0x0002 (Removable disk) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R Drive buf size : 890880 = 870 KB FIFO size : 12582912 = 12288 KB Speed set to 8467 KB/s Track 01: data 255 MB Total size: 292 MB (29:00.82) = 130562 sectors Lout start: 293 MB (29:02/62) = 130562 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type A, high Beta category (A+) (3) ATIP start of lead in: -11634 (97:26/66) ATIP start of lead out: 359846 (79:59/71) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359846 Blocks current: 359846 Blocks remaining: 229284 Starting to write CD/DVD at speed 48.0 in real TAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Starting new track at sector: 0 Track 01: 0 of 255 MB written. Track 01: 1 of 255 MB written (fifo 100%) [buf 100%] 3.8x. Track 01: 2 of 255 MB written (fifo 100%) [buf 100%] 6.5x. Track 01: 3 of 255 MB written (fifo 100%) [buf 100%] 22.6x. Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 00 00 07 A1 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.020s timeout 40s /usr/bin/wodim: A write error occured. /usr/bin/wodim: Please properly read the error message above. write track data: error after 3999744 bytes Writing time: 26.664s Average write speed 171.5x. Min drive buffer fill was 100% Fixating... Fixating time: 24.603s /usr/bin/wodim: fifo had 254 puts and 64 gets. /usr/bin/wodim: fifo was 0 times empty and 49 times full, min fill was 96%. BURN-Free was 1 times used. cdrecord command: ----------------------- /usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=48 -tao driveropts=burnfree -data -tsize=130560s - -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
