Package: src
Version: 3.2.21-3
Severity: normal
kerneloops with details included in the (automatic) logs below.
This looks as if it happened after hot plugging a usb stick. This same
usb drive is in regular use (hot plugging) and has not caused problems
before.
---------------------------------------------------------
-- Package-specific info:
** Version:
Linux version 3.2.0-3-686-pae (Debian 3.2.21-3)
(debian-ker...@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP
Thu Jun 28 08:56:46 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-686-pae
root=UUID=b0e0725b-0ebb-4a27-964d-75eb6e73e069 ro elevator=noop
enable_mtrr_cleanup
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[ 5.102296] Registered led device: ath5k-phy0::rx
[ 5.102401] Registered led device: ath5k-phy0::tx
[ 5.102439] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 5.194918] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 5.225612] cfg80211: World regulatory domain updated:
[ 5.230158] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 5.234784] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 5.234932] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 5.234998] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 5.240783] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 5.246249] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might
be trying access hardware directly.
[ 5.251748] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 5.257212] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 5.262559] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 5.267919] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 5.304918] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input8
[ 5.321331] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.328278] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.444060] psmouse serio2: synaptics: Advanced gesture mode init failed.
[ 6.257307] input: PS/2 Synaptics TouchPad as
/devices/platform/i8042/serio2/input/input11
[ 6.556673] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 7.422742] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 7.496649] device-mapper: uevent: version 1.0.3
[ 7.500764] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
dm-de...@redhat.com
[ 7.760765] loop: module loaded
[ 9.637697] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts:
(null)
[ 10.847127] RPC: Registered named UNIX socket transport module.
[ 10.850790] RPC: Registered udp transport module.
[ 10.854408] RPC: Registered tcp transport module.
[ 10.858020] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.882933] FS-Cache: Loaded
[ 10.917937] FS-Cache: Netfs 'nfs' registered for caching
[ 10.937952] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 11.431238] fuse init (API version 7.17)
[ 13.765447] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input12
[ 17.168772] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x208
[ 17.183496] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x208
[ 17.199047] microcode: Microcode Update Driver: v2.00
<tig...@aivazian.fsnet.co.uk>, Peter Oruba
[ 17.356010] microcode: CPU0 updated to revision 0x218, date = 2009-04-10
[ 17.364848] microcode: CPU1 updated to revision 0x218, date = 2009-04-10
[ 17.905074] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 17.909371] NFSD: starting 90-second grace period
[ 18.985582] r8169 0000:02:00.0: PME# enabled
[ 19.496466] ata2.00: configured for UDMA/100
[ 19.503404] ata2: EH complete
[ 19.511257] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 53.240305] r8169 0000:02:00.0: PME# disabled
[ 108.628100] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[ 108.763693] usb 1-2: New USB device found, idVendor=090c, idProduct=1000
[ 108.763714] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 108.763728] usb 1-2: Product: USB 2.0 Flash Drive
[ 108.763738] usb 1-2: Manufacturer: Super Talent Flash
[ 108.763749] usb 1-2: SerialNumber: 13000000000000005672
[ 108.795534] usbcore: registered new interface driver uas
[ 108.805971] Initializing USB Mass Storage driver...
[ 108.806334] scsi2 : usb-storage 1-2:1.0
[ 108.806641] usbcore: registered new interface driver usb-storage
[ 108.806650] USB Mass Storage support registered.
[ 109.805263] scsi 2:0:0:0: Direct-Access Flash/SM Super Talent 2.0 2040
PQ: 0 ANSI: 0 CCS
[ 109.814369] sd 2:0:0:0: [sdb] 1014784 512-byte logical blocks: (519 MB/495
MiB)
[ 109.815359] sd 2:0:0:0: [sdb] Write Protect is off
[ 109.815386] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 109.816404] sd 2:0:0:0: [sdb] No Caching mode page present
[ 109.816426] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 109.826063] sd 2:0:0:0: [sdb] No Caching mode page present
[ 109.826076] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 109.877082] sdb: sdb1 sdb2
[ 109.883216] sd 2:0:0:0: [sdb] No Caching mode page present
[ 109.883236] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 109.883252] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 110.230228] ------------[ cut here ]------------
[ 110.230248] WARNING: at
/build/buildd-linux_3.2.21-3-i386-vEohn4/linux-3.2.21/block/genhd.c:1573
disk_clear_events+0xa7/0xd6()
[ 110.230255] Hardware name: AOA110
[ 110.230259] Modules linked in: usb_storage uas snd_hrtimer microcode
cpufreq_powersave cpufreq_userspace cpufreq_stats cpufreq_conservative uinput
fuse nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc loop dm_crypt dm_mod
snd_hda_codec_realtek snd_hda_intel snd_hda_codec i2c_i801 snd_hwdep
snd_pcm_oss snd_mixer_oss snd_pcm arc4 snd_page_alloc snd_seq_midi
snd_seq_midi_event snd_rawmidi uvcvideo videodev sparse_keymap ath5k media ath
snd_seq mac80211 acerhdf snd_seq_device coretemp snd_timer pcspkr cfg80211
psmouse serio_raw evdev rfkill iTCO_wdt iTCO_vendor_support jmb38x_ms rng_core
memstick snd i915 soundcore drm_kms_helper drm battery i2c_algo_bit wmi
acpi_cpufreq mperf i2c_core video ac power_supply button processor thermal_sys
ext4 crc16 jbd2 mbcache mmc_block sd_mod crc_t10dif ata_generic ata_piix libata
scsi_mod uhci_hcd ehci_hcd sdhci_pci sdhci usbcore r8169 mmc_core mii
usb_common [last unloaded: scsi_wait_scan]
[ 110.230440] Pid: 3968, comm: blkid Not tainted 3.2.0-3-686-pae #1
[ 110.230445] Call Trace:
[ 110.230457] [<c1037fcc>] ? warn_slowpath_common+0x68/0x79
[ 110.230466] [<c1154145>] ? disk_clear_events+0xa7/0xd6
[ 110.230475] [<c1037fea>] ? warn_slowpath_null+0xd/0x10
[ 110.230483] [<c1154145>] ? disk_clear_events+0xa7/0xd6
[ 110.230501] [<c10ed4e6>] ? check_disk_change+0x1a/0x40
[ 110.230520] [<f826328e>] ? sd_open+0xc6/0x164 [sd_mod]
[ 110.230528] [<c10ee298>] ? __blkdev_get+0x23e/0x334
[ 110.230540] [<c10ee517>] ? blkdev_get+0x189/0x253
[ 110.230550] [<c1120824>] ? fsnotify_perm+0x4e/0x5a
[ 110.230558] [<c10edc1f>] ? bd_acquire+0x20/0x89
[ 110.230567] [<c10ca6bf>] ? __dentry_open+0x17a/0x253
[ 110.230575] [<c10cb403>] ? nameidata_to_filp+0x3a/0x45
[ 110.230583] [<c10ee5e1>] ? blkdev_get+0x253/0x253
[ 110.230591] [<c10d54be>] ? do_last+0x4f8/0x513
[ 110.230599] [<c10d5780>] ? path_openat+0xa1/0x287
[ 110.230607] [<c10d5a0f>] ? do_filp_open+0x23/0x5c
[ 110.230616] [<c1029ee0>] ? should_resched+0x5/0x1e
[ 110.230626] [<c12be8b1>] ? _cond_resched+0x5/0x18
[ 110.230634] [<c10cb462>] ? do_sys_open+0x54/0xcd
[ 110.230642] [<c10cb4f9>] ? sys_open+0x1e/0x23
[ 110.230651] [<c12c409f>] ? sysenter_do_call+0x12/0x28
[ 110.230657] ---[ end trace e9bff05c2b56e4a3 ]---
[ 203.036585] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id:
0x1c0b1, caps: 0xd04773/0xa40000/0xa0000
[ 203.092812] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio2/input/input13
** Model information
not available
** Loaded modules:
joydev
psmouse
usb_storage
uas
snd_hrtimer
microcode
cpufreq_powersave
cpufreq_userspace
cpufreq_stats
cpufreq_conservative
uinput
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
dm_crypt
dm_mod
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
i2c_i801
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
arc4
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
uvcvideo
videodev
sparse_keymap
ath5k
media
ath
snd_seq
mac80211
acerhdf
snd_seq_device
coretemp
snd_timer
pcspkr
cfg80211
serio_raw
evdev
rfkill
iTCO_wdt
iTCO_vendor_support
jmb38x_ms
rng_core
memstick
snd
i915
soundcore
drm_kms_helper
drm
battery
i2c_algo_bit
wmi
acpi_cpufreq
mperf
i2c_core
video
ac
power_supply
button
processor
thermal_sys
ext4
crc16
jbd2
mbcache
mmc_block
sd_mod
crc_t10dif
ata_generic
ata_piix
libata
scsi_mod
uhci_hcd
ehci_hcd
sdhci_pci
sdhci
usbcore
r8169
mmc_core
mii
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GSE Express Memory
Controller Hub [8086:27ac] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GSE
Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA
controller])
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 78480000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 60c0 [size=8]
Region 2: Memory at 60000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at 78500000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at 78400000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition
Audio Controller [8086:27d8] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at 78540000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: 77300000-783fffff
Prefetchable memory behind bridge: 0000000070000000-0000000070ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: 76300000-772fffff
Prefetchable memory behind bridge: 0000000071000000-00000000720fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 75200000-762fffff
Prefetchable memory behind bridge: 0000000072100000-00000000730fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 74100000-751fffff
Prefetchable memory behind bridge: 0000000073100000-00000000740fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 6080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 6060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 6040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 6020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI
Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 78544400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [8086:27b9] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7-M Family)
SATA Controller [IDE mode] [8086:27c4] (rev 02) (prog-if 80 [Master])
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 60a0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller
[8086:27da] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 6000 [size=32]
Kernel driver in use: i801_smbus
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: I/O ports at 3000 [size=256]
Region 2: Memory at 71010000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at 71000000 (64-bit, prefetchable) [size=64K]
Expansion ROM at 71020000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x
Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
Subsystem: Foxconn International, Inc. Device [105b:e008]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 75200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath5k
04:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host
Controller [197b:2382]
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Physical Slot: 1-1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 74100300 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 73100000 [disabled] [size=32K]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
04:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host
Controller [197b:2381] (prog-if 01)
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Physical Slot: 1-1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 74100200 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
04:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller
[197b:2383]
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Physical Slot: 1-1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 74100100 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: jmb38x_ms
04:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller
[197b:2384]
Subsystem: Acer Incorporated [ALI] Device [1025:015b]
Physical Slot: 1-1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 74100000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 064e:d101 Suyin Corp. Acer CrystalEye Webcam
Bus 001 Device 003: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya
Technology Corp.) 64MB QDI U2 DISK
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-3-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-3-686-pae depends on:
ii debconf [debconf-2.0] 1.5.44
ii initramfs-tools [linux-initramfs-tool] 0.107
ii kmod 8-2
ii linux-base 3.5
ii module-init-tools 8-2
Versions of packages linux-image-3.2.0-3-686-pae recommends:
ii firmware-linux-free 3.1
ii libc6-i686 2.13-33
Versions of packages linux-image-3.2.0-3-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-22.1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-3-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.36
ii firmware-linux-nonfree 0.36
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-3-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-3-686-pae/prerm/removing-running-kernel-3.2.0-3-686-pae:
true
linux-image-3.2.0-3-686-pae/postinst/depmod-error-initrd-3.2.0-3-686-pae:
false
linux-image-3.2.0-3-686-pae/postinst/missing-firmware-3.2.0-3-686-pae:
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
