Hi!
Sorry for reply delay.
There is not a bug, so all we can do - add some information about this
case into README.Debian.
You can try one of next workarounds:
1. Allow bacula-fd to listen on all addresses - remove line "FDAddress
= .." or change it to "FDAddress = 0.0.0.0"
2. If you always get the same IP-address from dhcp, then you can add
record for faerun.epperly.home into /etc/hosts or specify IP address in
bacula-fd.conf.
In such case bacula-fd correctly start and will be available on this
address after actual network configuration.
3. You can disable autostart of bacula-fd service (update-rc.d
bacula-fd disable) and start it later after network configuration by
dhclient or network-manager.
If network interface configured from /etc/network/interfaces and you
use dhclient (not udcpc or other), than create executable
/etc/dhcp/dhclient-exit-hooks.d/bacula with content
invoke-rc.d bacula-fd restart
(see man dhclient-script for details)
If network interface configured by NetworkManager directly, than create
executable /etc/NetworkManager/dispatcher.d/bacula with content
if [ "$1" = "eth1" -a "$2" = "up" ]; then invoke-rc.d bacula-fd
restart; fi
(see man network-manager for details)
On Thu, 28 Jun 2012 20:32:04 -0700, Tom Epperly wrote:
Package: bacula-fd
Version: 5.2.6+dfsg-1
Severity: normal
Dear Maintainer,
bacula-fd does not start when I boot my machine. I am not sure which
upgrade stopped bacula-fd, but it hasn't been working for a while.
My machine used to use ifup/ifdown to manage initializing eth1 and
initiating
DHCP to get the IP address etc. Some upgrade switched it to use
NetworkManager to initiate DHCP.
This is the error message flashes on the screen during boot up.
[....] Starting Bacula File daemon...:28-Jun 20:20 bacula-fd: ERROR
TERMINATION
at address_conf.c:521
Config error: can't add port (faerun.epperly.home) to (can't resolve
hostname(fa
erun.epperly.home) Non-authoritative for host not found, or
ServerFail.)
: line 49, col 33 of file /etc/bacula/bacula-fd.conf
FDAddress = faerun.epperly.home
failed!
This happens no my home desktop, and it also happens on my Ubuntu
laptop at work.
I tried adding $network to the Required-Start for the
init.d/bacula-fd
script, but it didn't fix the problem.
I can "service bacula-fd start" just fine from a terminal window once
the network is initialized.
Tom
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages bacula-fd depends on:
ii bacula-common 5.2.6+dfsg-1
ii libacl1 2.2.51-8
ii libc6 2.13-33
ii libgcc1 1:4.7.1-1
ii libpython2.7 2.7.3-1
ii libssl1.0.0 1.0.1c-3
ii libstdc++6 4.7.1-1
ii libwrap0 7.6.q-23
ii lsb-base 4.1+Debian7
ii ucf 3.0025+nmu3
ii zlib1g 1:1.2.7.dfsg-11
bacula-fd recommends no packages.
Versions of packages bacula-fd suggests:
ii bacula-traymonitor 5.2.6+dfsg-1
-- Configuration Files:
/etc/init.d/bacula-fd changed:
set -e
PATH=/sbin:/bin:/usr/sbin:/usr/bin
DAEMON=/usr/sbin/bacula-fd
NAME="bacula-fd"
PORT=9102
DESC="Bacula File daemon"
test -f $DAEMON || exit 0
if [ -n "`getent services bacula-fd`" ]; then
PORT=`getent services bacula-fd | awk '{ gsub("/tcp","",$2);
print $2; }
'`
fi
. /lib/lsb/init-functions
. /usr/share/bacula-common/common-functions.init
if [ -r /etc/default/$NAME ]; then
. /etc/default/$NAME
fi
CONFIG="${CONFIG:-/etc/bacula/$NAME.conf}"
create_var_run_dir
PIDFILE=/var/run/bacula/$NAME.$PORT.pid
do_start()
{
start-stop-daemon --start --quiet --pidfile $PIDFILE \
--oknodo --exec $DAEMON -- -c $CONFIG $ARGS
}
do_stop()
{
start-stop-daemon --oknodo --stop --quiet --pidfile $PIDFILE
\
--exec $DAEMON -- -c $CONFIG $ARGS
}
case "$1" in
start)
if [ "$ENABLED" = "no" ]; then
log_failure_msg "Not starting $DESC: disabled via
/etc/default/$
NAME"
exit 0
fi
log_daemon_msg "Starting $DESC..."
if do_start ; then
log_end_msg 0
else
log_end_msg 1
fi
;;
stop)
log_daemon_msg "Stopping $DESC..."
if do_stop ; then
log_end_msg 0
else
log_end_msg 1
fi
;;
restart|force-reload)
$0 stop
sleep 1
$0 start
;;
status)
status_of_proc -p $PIDFILE $DAEMON $NAME
;;
*)
N=/etc/init.d/$NAME
echo "Usage: $N {start|stop|restart|force-reload|status}" >&2
exit 1
;;
esac
exit 0
-- no debconf information
_______________________________________________
pkg-bacula-devel mailing list
pkg-bacula-de...@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pkg-bacula-devel
--
with best regards,
Alexander Golovko
email: alexan...@ankalagon.ru
xmpp: alexan...@ankalagon.ru
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
