Package: kernel-package
Version: 12.036+nmu1
Severity: normal
Tags: upstream
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-45)
(da...@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6
04:00:17 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID
=4c11f13a-c06a-458f-bfab-c862c8ea1418 ro quiet nomodeset
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000100 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cefb5000 (usable)
[ 0.000000] BIOS-e820: 00000000cefb5000 - 00000000cf009000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf009000 - 00000000cf5a4000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf5a4000 - 00000000cf5b5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf5b5000 - 00000000cf5cc000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf5cc000 - 00000000cf5ce000 (usable)
[ 0.000000] BIOS-e820: 00000000cf5ce000 - 00000000cf5d6000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf5d6000 - 00000000cf5e1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf5e1000 - 00000000cf63d000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf63d000 - 00000000cf680000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf680000 - 00000000cf800000 (usable)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000042f800000 (usable)
[ 0.000000] DMI 2.6 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0x42f800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FC0000000 write-back
[ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 base 42F800000 mask FFF800000 uncachable
[ 0.000000] 5 base 430000000 mask FF0000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf800000
[ 0.000000] 0000000000 - 00cf800000 page 2M
[ 0.000000] kernel direct mapping tables up to cf800000 @ 10000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-000000042f800000
[ 0.000000] 0100000000 - 042f800000 page 2M
[ 0.000000] kernel direct mapping tables up to 42f800000 @ 13000-25000
[ 0.000000] RAMDISK: 7f547000 - 7fff3061
[ 0.000000] ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000cf000068 0004C (v01 ALASKA A M I 01072009
AMI 00010013)
[ 0.000000] ACPI: FACP 00000000cf008a50 000F4 (v04 ALASKA A M I 01072009
AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000cf000140 0890C (v02 ALASKA A M I 00000000
INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cf5d8f80 00040
[ 0.000000] ACPI: APIC 00000000cf008b48 00072 (v03 ALASKA A M I 01072009
AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000cf008bc0 00102 (v01 AMICPU PROC 00000001
MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000cf008cc8 0003C (v01 ALASKA A M I 01072009
MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cf008d08 00038 (v01 ALASKA A M I 01072009
AMI. 00000004)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000042f800000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000042f800000
[ 0.000000] NODE_DATA [0000000000020000 - 0000000000027fff]
[ 0.000000] bootmap [0000000000100000 - 0000000000185eff] pages 86
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 042f800000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000
- 0000008000]
[ 0.000000] #2 [0001000000 - 00016d95c4] TEXT DATA BSS ==> [0001000000
- 00016d95c4]
[ 0.000000] #3 [007f547000 - 007fff3061] RAMDISK ==> [007f547000
- 007fff3061]
[ 0.000000] #4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800
- 0000100000]
[ 0.000000] #5 [00016da000 - 00016da27e] BRK ==> [00016da000
- 00016da27e]
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000
- 0000013000]
[ 0.000000] #7 [0000013000 - 0000020000] PGTABLE ==> [0000013000
- 0000020000]
[ 0.000000] found SMP MP-table at [ffff8800000fce70] fce70
[ 0.000000] [ffffea0000000000-ffffea000ebfffff] PMD ->
[ffff880001800000-ffff88000f9fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0042f800
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000cefb5
[ 0.000000] 0: 0x000cf5cc -> 0x000cf5ce
[ 0.000000] 0: 0x000cf680 -> 0x000cf800
[ 0.000000] 0: 0x00100000 -> 0x0042f800
[ 0.000000] On node 0 totalpages: 4188356
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 117 pages reserved
[ 0.000000] DMA zone: 3808 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 829807 pages, LIFO batch:31
[ 0.000000] Normal zone: 45668 pages used for memmap
[ 0.000000] Normal zone: 3294620 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009d000 -
000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cefb5000 -
00000000cf009000
[ 0.000000] PM: Registered nosave memory: 00000000cf009000 -
00000000cf5a4000
[ 0.000000] PM: Registered nosave memory: 00000000cf5a4000 -
00000000cf5b5000
[ 0.000000] PM: Registered nosave memory: 00000000cf5b5000 -
00000000cf5cc000
[ 0.000000] PM: Registered nosave memory: 00000000cf5ce000 -
00000000cf5d6000
[ 0.000000] PM: Registered nosave memory: 00000000cf5d6000 -
00000000cf5e1000
[ 0.000000] PM: Registered nosave memory: 00000000cf5e1000 -
00000000cf63d000
[ 0.000000] PM: Registered nosave memory: 00000000cf63d000 -
00000000cf680000
[ 0.000000] PM: Registered nosave memory: 00000000cf800000 -
00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 -
00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 -
00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at cf800000 (gap:
cf800000:2f51c000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88000fc00000 s90328 r8192
d24360 u524288
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 4128235
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64
root=UUID=4c11f13a-c06a-458f-bfab-c862c8ea1418 ro quiet nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff88000fd9e000 -
ffff880013d9e000
[ 0.000000] software IO TLB at phys 0xfd9e000 - 0x13d9e000
[ 0.000000] Memory: 16437140k/17555456k available (3083k kernel code,
802032k absent, 316284k reserved, 2048k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.004000] Fast TSC calibration using PIT
[ 0.008000] Detected 3310.297 MHz processor.
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer
frequency.. 6620.59 BogoMIPS (lpj=13241188)
[ 0.000010] Security Framework initialized
[ 0.000012] SELinux: Disabled at boot.
[ 0.000671] Dentry cache hash table entries: 2097152 (order: 12, 16777216
bytes)
[ 0.002772] Inode-cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.003660] Mount-cache hash table entries: 256
[ 0.003722] Initializing cgroup subsys ns
[ 0.003723] Initializing cgroup subsys cpuacct
[ 0.003725] Initializing cgroup subsys devices
[ 0.003726] Initializing cgroup subsys freezer
[ 0.003727] Initializing cgroup subsys net_cls
[ 0.003739] CPU: Physical Processor ID: 0
[ 0.003739] CPU: Processor Core ID: 0
[ 0.003741] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003742] CPU: L2 cache: 256K
[ 0.003743] CPU: L3 cache: 6144K
[ 0.003745] CPU 0/0x0 -> Node 0
[ 0.003747] mce: CPU supports 9 MCE banks
[ 0.003753] CPU0: Thermal LVT vector (0xfa) already installed
[ 0.003755] CPU 0 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8
[ 0.003760] using mwait in idle threads.
[ 0.003761] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.003763] ... version: 3
[ 0.003764] ... bit width: 48
[ 0.003765] ... generic registers: 8
[ 0.003766] ... value mask: 0000ffffffffffff
[ 0.003766] ... max period: 000000007fffffff
[ 0.003767] ... fixed-purpose events: 3
[ 0.003768] ... event mask: 00000007000000ff
[ 0.004396] ACPI: Core revision 20090903
[ 0.009121] Not enabling x2apic, Intr-remapping init failed.
[ 0.009122] Setting APIC routing to flat
[ 0.009455] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.049095] CPU0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz stepping 07
[ 0.156073] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.166240] Initializing CPU#1
[ 0.243937] CPU: Physical Processor ID: 0
[ 0.243938] CPU: Processor Core ID: 1
[ 0.243939] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.243940] CPU: L2 cache: 256K
[ 0.243941] CPU: L3 cache: 6144K
[ 0.243942] CPU 1/0x2 -> Node 0
[ 0.243950] CPU1: Thermal LVT vector (0xfa) already installed
[ 0.243951] CPU 1 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8
[ 0.243997] CPU1: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz stepping 07
[ 0.244003] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.264028] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.274214] Initializing CPU#2
[ 0.351833] CPU: Physical Processor ID: 0
[ 0.351833] CPU: Processor Core ID: 2
[ 0.351835] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.351836] CPU: L2 cache: 256K
[ 0.351836] CPU: L3 cache: 6144K
[ 0.351838] CPU 2/0x4 -> Node 0
[ 0.351845] CPU2: Thermal LVT vector (0xfa) already installed
[ 0.351846] CPU 2 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8
[ 0.351853] CPU2: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz stepping 07
[ 0.351858] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.371883] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.382069] Initializing CPU#3
[ 0.459727] CPU: Physical Processor ID: 0
[ 0.459728] CPU: Processor Core ID: 3
[ 0.459730] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.459730] CPU: L2 cache: 256K
[ 0.459731] CPU: L3 cache: 6144K
[ 0.459733] CPU 3/0x6 -> Node 0
[ 0.459740] CPU3: Thermal LVT vector (0xfa) already installed
[ 0.459741] CPU 3 MCA banks SHD:0 SHD:1 SHD:3 SHD:5 SHD:6 SHD:7 SHD:8
[ 0.459807] CPU3: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz stepping 07
[ 0.459813] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.479806] Brought up 4 CPUs
[ 0.479807] Total of 4 processors activated (26484.86 BogoMIPS).
[ 0.481117] CPU0 attaching sched-domain:
[ 0.481119] domain 0: span 0-3 level MC
[ 0.481120] groups: group ffff88000fc0fbf0 cpus 0 group ffff88000fc8fbf0
cpus 1 group ffff88000fd0fbf0 cpus 2 group ffff88000fd8fbf0 cpus 3
[ 0.481126] CPU1 attaching sched-domain:
[ 0.481127] domain 0: span 0-3 level MC
[ 0.481128] groups: group ffff88000fc8fbf0 cpus 1 group ffff88000fd0fbf0
cpus 2 group ffff88000fd8fbf0 cpus 3 group ffff88000fc0fbf0 cpus 0
[ 0.481131] CPU2 attaching sched-domain:
[ 0.481132] domain 0: span 0-3 level MC
[ 0.481133] groups: group ffff88000fd0fbf0 cpus 2 group ffff88000fd8fbf0
cpus 3 group ffff88000fc0fbf0 cpus 0 group ffff88000fc8fbf0 cpus 1
[ 0.481137] CPU3 attaching sched-domain:
[ 0.481137] domain 0: span 0-3 level MC
[ 0.481138] groups: group ffff88000fd8fbf0 cpus 3 group ffff88000fc0fbf0
cpus 0 group ffff88000fc8fbf0 cpus 1 group ffff88000fd0fbf0 cpus 2
[ 0.481302] devtmpfs: initialized
[ 0.483689] regulator: core version 0.5
[ 0.483718] NET: Registered protocol family 16
[ 0.483763] ACPI: bus type pci registered
[ 0.483803] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[ 0.483805] PCI: Not using MMCONFIG.
[ 0.483806] PCI: Using configuration type 1 for base access
[ 0.484281] bio: create slab <bio-0> at 0
[ 0.484742] ACPI: EC: Look up EC in DSDT
[ 0.485086] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.487536] ACPI Error (psargs-0359): [RAMB] Namespace lookup failure,
AE_NOT_FOUND
[ 0.487538] ACPI Exception: AE_NOT_FOUND, Could not execute arguments for
[RAMW] (Region) (20090903/nsinit-338)
[ 0.489015] ACPI: Interpreter enabled
[ 0.489016] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.489028] ACPI: Using IOAPIC for interrupt routing
[ 0.489057] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[ 0.489148] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
[ 0.490453] PCI: Using MMCONFIG at e0000000 - e3ffffff
[ 0.490600] ACPI: BIOS _OSI(Linux) query ignored
[ 0.494498] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.494614] ACPI: No dock devices found.
[ 0.494830] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.494888] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.494890] pci 0000:00:01.0: PME# disabled
[ 0.494947] pci 0000:00:16.0: reg 10 64bit mmio: [0xfb425000-0xfb42500f]
[ 0.495001] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.495004] pci 0000:00:16.0: PME# disabled
[ 0.495047] pci 0000:00:19.0: reg 10 32bit mmio: [0xfb400000-0xfb41ffff]
[ 0.495052] pci 0000:00:19.0: reg 14 32bit mmio: [0xfb424000-0xfb424fff]
[ 0.495057] pci 0000:00:19.0: reg 18 io port: [0xf040-0xf05f]
[ 0.495103] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.495106] pci 0000:00:19.0: PME# disabled
[ 0.495149] pci 0000:00:1a.0: reg 10 32bit mmio: [0xfb423000-0xfb4233ff]
[ 0.495213] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.495216] pci 0000:00:1a.0: PME# disabled
[ 0.495293] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.495296] pci 0000:00:1c.0: PME# disabled
[ 0.495374] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.495377] pci 0000:00:1c.1: PME# disabled
[ 0.495455] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.495458] pci 0000:00:1c.2: PME# disabled
[ 0.495537] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.495540] pci 0000:00:1c.4: PME# disabled
[ 0.495618] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.495622] pci 0000:00:1c.6: PME# disabled
[ 0.495668] pci 0000:00:1d.0: reg 10 32bit mmio: [0xfb422000-0xfb4223ff]
[ 0.495735] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.495738] pci 0000:00:1d.0: PME# disabled
[ 0.495872] pci 0000:00:1f.2: reg 10 io port: [0xf090-0xf097]
[ 0.495876] pci 0000:00:1f.2: reg 14 io port: [0xf080-0xf083]
[ 0.495881] pci 0000:00:1f.2: reg 18 io port: [0xf070-0xf077]
[ 0.495885] pci 0000:00:1f.2: reg 1c io port: [0xf060-0xf063]
[ 0.495890] pci 0000:00:1f.2: reg 20 io port: [0xf020-0xf03f]
[ 0.495895] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfb421000-0xfb4217ff]
[ 0.495932] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.495935] pci 0000:00:1f.2: PME# disabled
[ 0.495958] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfb420000-0xfb4200ff]
[ 0.495970] pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f]
[ 0.496003] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.496008] pci 0000:01:00.0: reg 14 64bit mmio pref:
[0xd0000000-0xdfffffff]
[ 0.496012] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 0.496015] pci 0000:01:00.0: reg 24 io port: [0xe000-0xe07f]
[ 0.496018] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]
[ 0.503728] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[ 0.503731] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfb0fffff]
[ 0.503736] pci 0000:00:01.0: bridge 64bit mmio pref:
[0xd0000000-0xdfffffff]
[ 0.503883] pci 0000:03:00.0: reg 10 64bit mmio: [0xfb300000-0xfb307fff]
[ 0.503996] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.504001] pci 0000:03:00.0: PME# disabled
[ 0.511819] pci 0000:00:1c.1: bridge 32bit mmio: [0xfb300000-0xfb3fffff]
[ 0.511929] pci 0000:05:00.0: reg 10 64bit mmio: [0xfb200000-0xfb207fff]
[ 0.512043] pci 0000:05:00.0: PME# supported from D3hot D3cold
[ 0.512048] pci 0000:05:00.0: PME# disabled
[ 0.519808] pci 0000:00:1c.4: bridge 32bit mmio: [0xfb200000-0xfb2fffff]
[ 0.519988] pci 0000:00:1c.6: transparent bridge
[ 0.519991] pci 0000:00:1c.6: bridge io port: [0xd000-0xdfff]
[ 0.519994] pci 0000:00:1c.6: bridge 32bit mmio: [0xfb100000-0xfb1fffff]
[ 0.520055] pci 0000:07:01.0: reg 10 io port: [0xd000-0xd0ff]
[ 0.520156] pci 0000:07:01.0: supports D1 D2
[ 0.520224] pci 0000:07:03.0: reg 10 32bit mmio: [0xfb100000-0xfb1007ff]
[ 0.520235] pci 0000:07:03.0: reg 14 io port: [0xd100-0xd17f]
[ 0.520329] pci 0000:07:03.0: supports D2
[ 0.520330] pci 0000:07:03.0: PME# supported from D2 D3hot D3cold
[ 0.520335] pci 0000:07:03.0: PME# disabled
[ 0.520415] pci 0000:06:00.0: transparent bridge
[ 0.520424] pci 0000:06:00.0: bridge io port: [0xd000-0xdfff]
[ 0.520430] pci 0000:06:00.0: bridge 32bit mmio: [0xfb100000-0xfb1fffff]
[ 0.520471] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.520552] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.520583] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.520612] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.520642] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.520672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.520702] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
[ 0.520733] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.BR24._PRT]
[ 0.523382] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14
15), disabled.
[ 0.523444] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14
15), disabled.
[ 0.523504] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15),
disabled.
[ 0.523564] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15),
disabled.
[ 0.523624] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14
15), disabled.
[ 0.523687] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14
15), disabled.
[ 0.523747] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 0.523808] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14
15), disabled.
[ 0.523858] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.523860] vgaarb: loaded
[ 0.523883] PCI: Using ACPI for IRQ routing
[ 0.523992] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.523995] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.526004] Switching to clocksource tsc
[ 0.526585] pnp: PnP ACPI init
[ 0.526589] ACPI: bus type pnp registered
[ 0.527867] pnp: PnP ACPI: found 12 devices
[ 0.527868] ACPI: ACPI bus type pnp unregistered
[ 0.527873] system 00:01: iomem range 0xfed10000-0xfed19fff has been
reserved
[ 0.527874] system 00:01: iomem range 0xe0000000-0xe3ffffff has been
reserved
[ 0.527876] system 00:01: iomem range 0xfed90000-0xfed93fff has been
reserved
[ 0.527877] system 00:01: iomem range 0xfed20000-0xfed3ffff has been
reserved
[ 0.527878] system 00:01: iomem range 0xfee00000-0xfee0ffff has been
reserved
[ 0.527881] system 00:02: ioport range 0x290-0x29f has been reserved
[ 0.527884] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.527887] system 00:09: ioport range 0x400-0x453 has been reserved
[ 0.527888] system 00:09: ioport range 0x458-0x47f has been reserved
[ 0.527889] system 00:09: ioport range 0x500-0x57f has been reserved
[ 0.527891] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.527892] system 00:09: iomem range 0xfec00000-0xfecfffff could not be
reserved
[ 0.527894] system 00:09: iomem range 0xfed08000-0xfed08fff has been
reserved
[ 0.527895] system 00:09: iomem range 0xff000000-0xffffffff has been
reserved
[ 0.527898] system 00:0a: ioport range 0x454-0x457 has been reserved
[ 0.532531] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.532533] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 0.532535] pci 0000:00:01.0: MEM window: 0xf8000000-0xfb0fffff
[ 0.532537] pci 0000:00:01.0: PREFETCH window:
0x000000d0000000-0x000000dfffffff
[ 0.532539] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.532540] pci 0000:00:1c.0: IO window: disabled
[ 0.532544] pci 0000:00:1c.0: MEM window: disabled
[ 0.532547] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.532552] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.532553] pci 0000:00:1c.1: IO window: disabled
[ 0.532557] pci 0000:00:1c.1: MEM window: 0xfb300000-0xfb3fffff
[ 0.532560] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.532565] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.532566] pci 0000:00:1c.2: IO window: disabled
[ 0.532570] pci 0000:00:1c.2: MEM window: disabled
[ 0.532573] pci 0000:00:1c.2: PREFETCH window: disabled
[ 0.532578] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05
[ 0.532579] pci 0000:00:1c.4: IO window: disabled
[ 0.532583] pci 0000:00:1c.4: MEM window: 0xfb200000-0xfb2fffff
[ 0.532587] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.532592] pci 0000:06:00.0: PCI bridge, secondary bus 0000:07
[ 0.532595] pci 0000:06:00.0: IO window: 0xd000-0xdfff
[ 0.532602] pci 0000:06:00.0: MEM window: 0xfb100000-0xfb1fffff
[ 0.532607] pci 0000:06:00.0: PREFETCH window: disabled
[ 0.532616] pci 0000:00:1c.6: PCI bridge, secondary bus 0000:06
[ 0.532619] pci 0000:00:1c.6: IO window: 0xd000-0xdfff
[ 0.532623] pci 0000:00:1c.6: MEM window: 0xfb100000-0xfb1fffff
[ 0.532626] pci 0000:00:1c.6: PREFETCH window: disabled
[ 0.532634] alloc irq_desc for 16 on node -1
[ 0.532635] alloc kstat_irqs on node -1
[ 0.532638] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.532639] pci 0000:00:01.0: setting latency timer to 64
[ 0.532645] alloc irq_desc for 17 on node -1
[ 0.532646] alloc kstat_irqs on node -1
[ 0.532648] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.532651] pci 0000:00:1c.0: setting latency timer to 64
[ 0.532657] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.532661] pci 0000:00:1c.1: setting latency timer to 64
[ 0.532667] alloc irq_desc for 18 on node -1
[ 0.532668] alloc kstat_irqs on node -1
[ 0.532669] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.532673] pci 0000:00:1c.2: setting latency timer to 64
[ 0.532679] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.532682] pci 0000:00:1c.4: setting latency timer to 64
[ 0.532689] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.532692] pci 0000:00:1c.6: setting latency timer to 64
[ 0.532696] pci 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.532702] pci 0000:06:00.0: setting latency timer to 64
[ 0.532706] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.532707] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.532708] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.532709] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfb0fffff]
[ 0.532710] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.532712] pci_bus 0000:03: resource 1 mem: [0xfb300000-0xfb3fffff]
[ 0.532713] pci_bus 0000:05: resource 1 mem: [0xfb200000-0xfb2fffff]
[ 0.532714] pci_bus 0000:06: resource 0 io: [0xd000-0xdfff]
[ 0.532715] pci_bus 0000:06: resource 1 mem: [0xfb100000-0xfb1fffff]
[ 0.532716] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.532717] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.532718] pci_bus 0000:07: resource 0 io: [0xd000-0xdfff]
[ 0.532719] pci_bus 0000:07: resource 1 mem: [0xfb100000-0xfb1fffff]
[ 0.532720] pci_bus 0000:07: resource 3 io: [0xd000-0xdfff]
[ 0.532721] pci_bus 0000:07: resource 4 mem: [0xfb100000-0xfb1fffff]
[ 0.532722] pci_bus 0000:07: resource 6 io: [0x00-0xffff]
[ 0.532723] pci_bus 0000:07: resource 7 mem: [0x000000-0xffffffffffffffff]
[ 0.532735] NET: Registered protocol family 2
[ 0.532934] IP route cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.533531] TCP established hash table entries: 524288 (order: 11, 8388608
bytes)
[ 0.534360] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.534454] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.534455] TCP reno registered
[ 0.534500] NET: Registered protocol family 1
[ 0.534518] alloc irq_desc for 23 on node -1
[ 0.534519] alloc kstat_irqs on node -1
[ 0.534523] pci 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.534541] pci 0000:00:1a.0: PCI INT A disabled
[ 0.534551] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.534568] pci 0000:00:1d.0: PCI INT A disabled
[ 0.534577] pci 0000:01:00.0: Boot video device
[ 0.534588] pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.534608] pci 0000:03:00.0: PCI INT A disabled
[ 0.534619] pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.534639] pci 0000:05:00.0: PCI INT A disabled
[ 0.534664] Unpacking initramfs...
[ 0.667197] Freeing initrd memory: 10928k freed
[ 0.668273] audit: initializing netlink socket (disabled)
[ 0.668279] type=2000 audit(1340837346.521:1): initialized
[ 0.670299] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.670975] VFS: Disk quotas dquot_6.5.2
[ 0.671023] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.671062] msgmni has been set to 32125
[ 0.671196] alg: No test for stdrng (krng)
[ 0.671248] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.671249] io scheduler noop registered
[ 0.671250] io scheduler anticipatory registered
[ 0.671251] io scheduler deadline registered
[ 0.671276] io scheduler cfq registered (default)
[ 0.671328] alloc irq_desc for 24 on node -1
[ 0.671329] alloc kstat_irqs on node -1
[ 0.671333] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.671336] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.671401] alloc irq_desc for 25 on node -1
[ 0.671402] alloc kstat_irqs on node -1
[ 0.671408] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.671415] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.671499] alloc irq_desc for 26 on node -1
[ 0.671500] alloc kstat_irqs on node -1
[ 0.671505] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.671512] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.671640] alloc irq_desc for 27 on node -1
[ 0.671641] alloc kstat_irqs on node -1
[ 0.671647] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 0.671654] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.671738] alloc irq_desc for 28 on node -1
[ 0.671738] alloc kstat_irqs on node -1
[ 0.671744] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
[ 0.671751] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.672412] Linux agpgart interface v0.103
[ 0.672429] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.672513] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.672725] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.672790] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 0.672817] PNP: No PS/2 controller found. Probing ports directly.
[ 0.675296] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.675298] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.675331] mice: PS/2 mouse device common for all mice
[ 0.675351] rtc_cmos 00:04: RTC can wake from S4
[ 0.675366] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.675390] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.675397] cpuidle: using governor ladder
[ 0.675398] cpuidle: using governor menu
[ 0.675400] No iBFT detected.
[ 0.675523] TCP cubic registered
[ 0.675574] NET: Registered protocol family 10
[ 0.675855] Mobile IPv6
[ 0.675857] NET: Registered protocol family 17
[ 0.675888] PM: Resume from disk failed.
[ 0.675895] registered taskstats version 1
[ 0.676278] rtc_cmos 00:04: setting system clock to 2012-06-27 22:49:06 UTC
(1340837346)
[ 0.676309] Initalizing network drop monitor service
[ 0.676322] Freeing unused kernel memory: 592k freed
[ 0.676368] Write protecting the kernel read-only data: 4240k
[ 0.689356] udev[76]: starting version 164
[ 0.694857] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
[ 0.694858] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 0.694878] e1000e 0000:00:19.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.694885] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.694950] alloc irq_desc for 29 on node -1
[ 0.694951] alloc kstat_irqs on node -1
[ 0.694960] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 0.710195] usbcore: registered new interface driver usbfs
[ 0.710209] usbcore: registered new interface driver hub
[ 0.712189] usbcore: registered new device driver usb
[ 0.713972] SCSI subsystem initialized
[ 0.714354] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.714758] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ
17
[ 0.714780] xhci_hcd 0000:03:00.0: setting latency timer to 64
[ 0.714784] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.714794] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus
number 1
[ 0.721767] xhci_hcd 0000:03:00.0: irq 17, io mem 0xfb300000
[ 0.722391] libata version 3.00 loaded.
[ 0.726003] firewire_ohci 0000:07:03.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 0.726968] usb usb1: config 1 interface 0 altsetting 0 endpoint 0x81 has no
SuperSpeed companion descriptor
[ 0.726978] usb usb1: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.726981] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.726983] usb usb1: Product: xHCI Host Controller
[ 0.726985] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 xhci_hcd
[ 0.726987] usb usb1: SerialNumber: 0000:03:00.0
[ 0.727071] usb usb1: configuration #1 chosen from 1 choice
[ 0.727075] xHCI xhci_add_endpoint called for root hub
[ 0.727077] xHCI xhci_check_bandwidth called for root hub
[ 0.727108] hub 1-0:1.0: USB hub found
[ 0.727114] hub 1-0:1.0: 4 ports detected
[ 0.727183] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 0.727205] xhci_hcd 0000:05:00.0: setting latency timer to 64
[ 0.727210] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 0.727218] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus
number 2
[ 0.734248] xhci_hcd 0000:05:00.0: irq 16, io mem 0xfb200000
[ 0.739385] usb usb2: config 1 interface 0 altsetting 0 endpoint 0x81 has no
SuperSpeed companion descriptor
[ 0.739393] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.739396] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.739398] usb usb2: Product: xHCI Host Controller
[ 0.739400] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 xhci_hcd
[ 0.739402] usb usb2: SerialNumber: 0000:05:00.0
[ 0.739463] usb usb2: configuration #1 chosen from 1 choice
[ 0.739466] xHCI xhci_add_endpoint called for root hub
[ 0.739468] xHCI xhci_check_bandwidth called for root hub
[ 0.739501] hub 2-0:1.0: USB hub found
[ 0.739507] hub 2-0:1.0: 4 ports detected
[ 0.803491] firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI version
1.10
[ 0.968182] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1)
14:da:e9:da:89:ae
[ 0.968186] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 0.968223] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 0.968246] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 0.968274] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.968278] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.968290] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[ 0.968329] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.972198] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[ 0.972216] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfb423000
[ 0.987292] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.987310] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.987313] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.987315] usb usb3: Product: EHCI Host Controller
[ 0.987317] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.987319] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.987388] usb usb3: configuration #1 chosen from 1 choice
[ 0.987420] hub 3-0:1.0: USB hub found
[ 0.987426] hub 3-0:1.0: 2 ports detected
[ 0.987475] ahci 0000:00:1f.2: version 3.0
[ 0.987494] alloc irq_desc for 20 on node -1
[ 0.987496] alloc kstat_irqs on node -1
[ 0.987503] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 0.987544] alloc irq_desc for 30 on node -1
[ 0.987546] alloc kstat_irqs on node -1
[ 0.987557] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
[ 1.003223] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x38
impl SATA mode
[ 1.003228] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum
part ems apst
[ 1.003233] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.019231] scsi0 : ahci
[ 1.019328] scsi1 : ahci
[ 1.019367] scsi2 : ahci
[ 1.019393] scsi3 : ahci
[ 1.019421] scsi4 : ahci
[ 1.019447] scsi5 : ahci
[ 1.019530] ata1: DUMMY
[ 1.019530] ata2: DUMMY
[ 1.019531] ata3: DUMMY
[ 1.019533] ata4: SATA max UDMA/133 abar m2048@0xfb421000 port 0xfb421280
irq 30
[ 1.019535] ata5: SATA max UDMA/133 abar m2048@0xfb421000 port 0xfb421300
irq 30
[ 1.019537] ata6: SATA max UDMA/133 abar m2048@0xfb421000 port 0xfb421380
irq 30
[ 1.019551] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 1.019561] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.019564] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.019579] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 4
[ 1.019614] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.023482] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 1.023488] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfb422000
[ 1.039201] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.039218] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.039221] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.039223] usb usb4: Product: EHCI Host Controller
[ 1.039225] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.039227] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.039294] usb usb4: configuration #1 chosen from 1 choice
[ 1.039326] hub 4-0:1.0: USB hub found
[ 1.039332] hub 4-0:1.0: 2 ports detected
[ 1.301223] usb 3-1: new high speed USB device using ehci_hcd and address 2
[ 1.305265] firewire_core: created device fw0: GUID 001fc6000018ca0f, S400
[ 1.342683] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.342704] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.342721] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.342971] ata4.00: ATA-8: INTEL SSDSA2CW080G3, 4PC10362, max UDMA/133
[ 1.342974] ata4.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.343324] ata4.00: configured for UDMA/133
[ 1.344367] ata5.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[ 1.344370] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.345727] ata6.00: ATAPI: HL-DT-ST BDDVDRW CH08LS10, 2.00, max UDMA/133
[ 1.346126] ata5.00: configured for UDMA/133
[ 1.349718] ata6.00: configured for UDMA/133
[ 1.357251] scsi 3:0:0:0: Direct-Access ATA INTEL SSDSA2CW08 4PC1
PQ: 0 ANSI: 5
[ 1.361252] scsi 4:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0
PQ: 0 ANSI: 5
[ 1.376744] scsi 5:0:0:0: CD-ROM HL-DT-ST BDDVDRW CH08LS10 2.00
PQ: 0 ANSI: 5
[ 1.379765] sd 3:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0
GB/74.5 GiB)
[ 1.379793] sd 3:0:0:0: [sda] Write Protect is off
[ 1.379794] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.379803] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 1.379804] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.379826] sd 4:0:0:0: [sdb] Write Protect is off
[ 1.379827] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.379839] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.379902] sda:
[ 1.379938] sdb: sda1 sda2 < sda5 >
[ 1.380436] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.394487] sdb1
[ 1.394692] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 1.403106] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 1.403110] Uniform CD-ROM driver Revision: 3.20
[ 1.403196] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 1.405756] sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 1.405794] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 1.405817] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 1.437448] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.437452] usb 3-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 1.437522] usb 3-1: configuration #1 chosen from 1 choice
[ 1.437601] hub 3-1:1.0: USB hub found
[ 1.437695] hub 3-1:1.0: 6 ports detected
[ 1.548951] usb 4-1: new high speed USB device using ehci_hcd and address 2
[ 1.596443] PM: Starting manual resume from disk
[ 1.596446] PM: Resume from partition 8:5
[ 1.596448] PM: Checking hibernation image.
[ 1.596653] PM: Error -22 checking image file
[ 1.596655] PM: Resume from disk failed.
[ 1.609134] kjournald starting. Commit interval 5 seconds
[ 1.609141] EXT3-fs: mounted filesystem with ordered data mode.
[ 1.681218] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.681222] usb 4-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 1.681311] usb 4-1: configuration #1 chosen from 1 choice
[ 1.681496] hub 4-1:1.0: USB hub found
[ 1.681588] hub 4-1:1.0: 8 ports detected
[ 1.788900] udev[473]: starting version 164
[ 1.826689] ACPI: SSDT 00000000cf5d7918 003E0 (v01 AMI IST 00000001
MSFT 03000001)
[ 1.826855] ACPI: SSDT 00000000cf5d6d98 00120 (v01 AMI CST 00000001
MSFT 03000001)
[ 1.829358] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.829365] ACPI: Power Button [PWRB]
[ 1.834771] Monitor-Mwait will be used to enter C-1 state
[ 1.837477] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 1.838233] Monitor-Mwait will be used to enter C-2 state
[ 1.848666] Monitor-Mwait will be used to enter C-3 state
[ 1.848720] processor LNXCPU:00: registered as cooling_device0
[ 1.848755] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.848776] ACPI: Power Button [PWRF]
[ 1.849770] processor LNXCPU:01: registered as cooling_device1
[ 1.850408] processor LNXCPU:02: registered as cooling_device2
[ 1.851180] processor LNXCPU:03: registered as cooling_device3
[ 1.952598] usb 4-1.1: new full speed USB device using ehci_hcd and address
3
[ 1.999629] nvidia: module license 'NVIDIA' taints kernel.
[ 1.999631] Disabling lock debugging due to kernel taint
[ 2.047892] usb 4-1.1: New USB device found, idVendor=046d, idProduct=c52b
[ 2.047894] usb 4-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.047895] usb 4-1.1: Product: USB Receiver
[ 2.047896] usb 4-1.1: Manufacturer: Logitech
[ 2.047945] usb 4-1.1: configuration #1 chosen from 1 choice
[ 2.098890] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.098895] nvidia 0000:01:00.0: setting latency timer to 64
[ 2.098898] vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.099000] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.59 Wed Jun
6 21:19:40 PDT 2012
[ 2.100120] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 2.100509] ACPI: WMI: Mapper loaded
[ 2.121440] usb 4-1.2: new full speed USB device using ehci_hcd and address
4
[ 2.122771] usbcore: registered new interface driver hiddev
[ 2.123692] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/input/input4
[ 2.123733] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11
Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0
[ 2.125586] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.1/input/input5
[ 2.125673] generic-usb 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID
v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1
[ 2.127947] generic-usb 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11
Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input2
[ 2.127956] usbcore: registered new interface driver usbhid
[ 2.127958] usbhid: v2.6:USB HID core driver
[ 2.185476] alloc irq_desc for 19 on node -1
[ 2.185478] alloc kstat_irqs on node -1
[ 2.185482] AV200 0000:07:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.214758] usb 4-1.2: New USB device found, idVendor=046d, idProduct=c22d
[ 2.214762] usb 4-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.214765] usb 4-1.2: Product: G510 Gaming Keyboard
[ 2.214767] usb 4-1.2: Manufacturer: Logitech
[ 2.214856] usb 4-1.2: configuration #1 chosen from 1 choice
[ 2.216643] input: Logitech G510 Gaming Keyboard as
/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.0/input/input6
[ 2.216685] generic-usb 0003:046D:C22D.0004: input,hidraw3: USB HID v1.11
Keyboard [Logitech G510 Gaming Keyboard] on usb-0000:00:1d.0-1.2/input0
[ 2.222449] input: Logitech G510 Gaming Keyboard as
/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.1/input/input7
[ 2.222529] generic-usb 0003:046D:C22D.0005: input,hiddev2,hidraw4: USB HID
v1.11 Device [Logitech G510 Gaming Keyboard] on usb-0000:00:1d.0-1.2/input1
[ 2.292294] usb 4-1.3: new high speed USB device using ehci_hcd and address
5
[ 2.389738] usb 4-1.3: New USB device found, idVendor=1058, idProduct=1100
[ 2.389742] usb 4-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.389745] usb 4-1.3: Product: My Book
[ 2.389747] usb 4-1.3: Manufacturer: Western Digital
[ 2.389749] usb 4-1.3: SerialNumber: 57442D574341553434333036363037
[ 2.389829] usb 4-1.3: configuration #1 chosen from 1 choice
[ 2.406479] Initializing USB Mass Storage driver...
[ 2.406646] scsi6 : SCSI emulation for USB Mass Storage devices
[ 2.406878] usbcore: registered new interface driver usb-storage
[ 2.406882] usb-storage: device found at 5
[ 2.406884] usb-storage: waiting for device to settle before scanning
[ 2.406887] USB Mass Storage support registered.
[ 2.460165] usb 4-1.7: new full speed USB device using ehci_hcd and address
6
[ 2.554151] usb 4-1.7: New USB device found, idVendor=0cf3, idProduct=3000
[ 2.554155] usb 4-1.7: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2.554215] usb 4-1.7: configuration #1 chosen from 1 choice
[ 2.597793] Adding 3212280k swap on /dev/sda5. Priority:-1 extents:1
across:3212280k SS
[ 7.399113] usb-storage: device scan complete
[ 7.399678] scsi 6:0:0:0: Direct-Access WD 10EAVS External 1.65
PQ: 0 ANSI: 4
[ 7.400610] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 7.401417] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 7.402277] sd 6:0:0:0: [sdc] Write Protect is off
[ 7.402279] sd 6:0:0:0: [sdc] Mode Sense: 21 00 00 00
[ 7.402280] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 7.404048] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 7.404129] sdc: sdc1
[ 7.422092] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 7.422163] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 25.912909] EXT3 FS on sda1, internal journal
[ 25.925764] loop: module loaded
[ 25.992871] fuse init (API version 7.13)
[ 26.641666] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 26.697516] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 26.698252] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.278443] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
Rx/Tx
[ 30.279147] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 33.098630] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input8
[ 33.166023] Bluetooth: Core ver 2.15
[ 33.166050] NET: Registered protocol family 31
[ 33.166051] Bluetooth: HCI device and connection manager initialized
[ 33.166053] Bluetooth: HCI socket layer initialized
[ 33.211370] vboxdrv: Found 4 processor cores.
[ 33.211662] VBoxDrv: dbg - g_abExecMemory=ffffffffa0f2fa40
[ 33.211702] vboxdrv: fAsync=0 offMin=0x1dd offMax=0x73d3
[ 33.211727] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 33.211728] vboxdrv: Successfully loaded version 4.1.18 (interface
0x00190000).
[ 33.240495] Bluetooth: L2CAP ver 2.14
[ 33.240496] Bluetooth: L2CAP socket layer initialized
[ 33.242542] Bluetooth: RFCOMM TTY layer initialized
[ 33.242544] Bluetooth: RFCOMM socket layer initialized
[ 33.242545] Bluetooth: RFCOMM ver 1.11
[ 33.267642] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 33.267643] Bluetooth: BNEP filters: protocol multicast
[ 33.277051] Bridge firewalling registered
[ 33.303809] Bluetooth: SCO (Voice Link) ver 0.6
[ 33.303810] Bluetooth: SCO socket layer initialized
[ 33.320180] lp: driver loaded but no devices found
[ 33.340132] ppdev: user-space parallel port driver
[ 33.474916] vboxpci: IOMMU not found (not compiled)
[ 40.702138] eth0: no IPv6 routers present
[ 921.793455] warning: `VirtualBox' uses 32-bit capabilities (legacy support
in use)
[ 1142.500109] irq 19: nobody cared (try booting with the "irqpoll" option)
[ 1142.500113] Pid: 0, comm: swapper Tainted: P 2.6.32-5-amd64 #1
[ 1142.500114] Call Trace:
[ 1142.500115] <IRQ> [<ffffffff81095da1>] ? __report_bad_irq+0x30/0x7d
[ 1142.500121] [<ffffffff81095ef3>] ? note_interrupt+0x105/0x16e
[ 1142.500123] [<ffffffff81096558>] ? handle_fasteoi_irq+0x93/0xb5
[ 1142.500126] [<ffffffff8101327f>] ? handle_irq+0x17/0x1d
[ 1142.500127] [<ffffffff810128d9>] ? do_IRQ+0x57/0xb6
[ 1142.500129] [<ffffffff810114d3>] ? ret_from_intr+0x0/0x11
[ 1142.500130] <EOI> [<ffffffffa0159271>] ? acpi_idle_enter_c1+0x9d/0xb8
[processor]
[ 1142.500140] [<ffffffffa015924c>] ? acpi_idle_enter_c1+0x78/0xb8 [processor]
[ 1142.500143] [<ffffffff8123a2c6>] ? cpuidle_idle_call+0x94/0xee
[ 1142.500145] [<ffffffff8100fe97>] ? cpu_idle+0xa2/0xda
[ 1142.500147] [<ffffffff8151c140>] ? early_idt_handler+0x0/0x71
[ 1142.500149] [<ffffffff8151ccdd>] ? start_kernel+0x3dc/0x3e8
[ 1142.500151] [<ffffffff8151c3b7>] ? x86_64_start_kernel+0xf9/0x106
[ 1142.500152] handlers:
[ 1142.500152] [<ffffffffa0e875a4>] (oxygen_interrupt+0x0/0x1f2
[snd_oxygen_lib])
[ 1142.500155] Disabling IRQ #19
[ 1460.529263] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
------------------------------------------------------------------------------------------------------
CPU0 CPU1 CPU2 CPU3
0: 61 0 0 0 IO-APIC-edge timer
1: 2 0 0 0 IO-APIC-edge i8042
4: 2 0 0 0 IO-APIC-edge
8: 1 0 0 0 IO-APIC-edge rtc0
9: 0 0 0 0 IO-APIC-fasteoi acpi
12: 4 0 0 0 IO-APIC-edge i8042
16: 5590 0 0 0 IO-APIC-fasteoi
xhci_hcd:usb2, nvidia
17: 89 0 0 0 IO-APIC-fasteoi
xhci_hcd:usb1, firewire_ohci
19: 200001 0 0 0 IO-APIC-fasteoi oxygen
23: 81220 0 0 0 IO-APIC-fasteoi
ehci_hcd:usb3, ehci_hcd:usb4
29: 688879 0 0 0 PCI-MSI-edge eth0
30: 280923 0 0 0 PCI-MSI-edge ahci
NMI: 0 0 0 0 Non-maskable interrupts
LOC: 2487646 2284475 3570627 3294945 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 Performance monitoring
interrupts
PND: 0 0 0 0 Performance pending work
RES: 9069 10521 5857 4078 Rescheduling interrupts
CAL: 31949 35977 64674 113922 Function call interrupts
TLB: 26162 17927 59238 77548 TLB shootdowns
TRM: 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 20 20 20 20 Machine check polls
ERR: 0
MIS: 0
-- System Information:
Debian Release: 6.0.5
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages kernel-package depends on:
ii binutils 2.20.1-16 The GNU assembler, linker and bina
ii build-essential 11.5 Informational list of build-essent
ii debianutils 3.4 Miscellaneous utilities specific t
ii file 5.04-5+squeeze2 Determines file type using "magic"
ii gettext 0.18.1.1-3 GNU Internationalization utilities
ii make 3.81-8 An utility for Directing compilati
ii module-init-tools 3.12-2 tools for managing Linux kernel mo
ii po-debconf 1.0.16+nmu1 tool for managing templates file t
ii util-linux 2.17.2-9 Miscellaneous system utilities
Versions of packages kernel-package recommends:
ii cpio 2.11-4 GNU cpio -- a program to manage ar
Versions of packages kernel-package suggests:
pn btrfs-tools <none> (no description available)
ii bzip2 1.0.5-6+squeeze1 high-quality block-sorting file co
pn docbook-utils <none> (no description available)
ii e2fsprogs 1.41.12-4stable1 ext2/ext3/ext4 file system utiliti
pn grub | grub2 <none> (no description available)
ii initramfs-tools [linux 0.98.8 tools for generating an initramfs
pn jfsutils <none> (no description available)
ii libncurses5-dev [libnc 5.7+20100313-5 developer's libraries and docs for
pn linux-source | kernel- <none> (no description available)
pn mcelog <none> (no description available)
pn oprofile <none> (no description available)
ii pcmciautils 015-1 PCMCIA utilities for Linux 2.6
ii ppp 2.4.5-4 Point-to-Point Protocol (PPP) - da
ii procps 1:3.2.8-9squeeze1 /proc file system utilities
pn quota <none> (no description available)
pn reiserfsprogs <none> (no description available)
pn squashfs-tools <none> (no description available)
ii udev 164-3 /dev/ and hotplug management daemo
pn xfsprogs <none> (no description available)
pn xmlto <none> (no description available)
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
