Package: mtpfs
Version: 1.1-2
Severity: normal

Dear Maintainer,
*** Please consider answering these questions, where appropriate ***

   * What led up to the situation?

try mounting the device

   * What exactly did you do (or not do) that was effective (or
     ineffective)?

mount.mtpfs /mnt/android/

   * What was the outcome of this action?

Listing raw device(s)
Device 0 (VID=17ef and PID=74cc) is UNKNOWN.
Please report this VID/PID and the device model to the libmtp
development team
   Found 1 device(s):
   17ef:74cc @ bus 2, dev 13
Attempting to connect device
PTP_ERROR_IO: failed to open session, trying again after resetting USB
interface
LIBMTP libusb: Attempt to reset device
LIBMTP PANIC: failed to open session on second attempt
Unable to open raw device 0


usbview shows:

shows following data:

LIFETAB_S9512
Manufacturer: LENOVO
Serial Number: FD00026216
Speed: 480Mb/s (high)
USB Version:  2.00
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 64
Number of Configurations: 1
Vendor Id: 17ef
Product Id: 74cc
Revision Number:  2.16

Config Number: 1
        Number of Interfaces: 2
        Attributes: c0
        MaxPower Needed: 500mA

        Interface Number: 0
                Name: usbfs
                Alternate Number: 0
                Class: ff(vend.)
                Sub Class: ff
                Protocol: 00
                Number of Endpoints: 3

                        Endpoint Address: 81
                        Direction: in
                        Attribute: 2
                        Type: Bulk
                        Max Packet Size: 512
                        Interval: 0ms

                        Endpoint Address: 02
                        Direction: out
                        Attribute: 2
                        Type: Bulk
                        Max Packet Size: 512
                        Interval: 0ms

                        Endpoint Address: 82
                        Direction: in
                        Attribute: 3
                        Type: Int.
                        Max Packet Size: 28
                        Interval: 4ms

        Interface Number: 1
                Name: usb-storage
                Alternate Number: 0
                Class: 08(stor.)
                Sub Class: 06
                Protocol: 50
                Number of Endpoints: 2

                        Endpoint Address: 83
                        Direction: in
                        Attribute: 2
                        Type: Bulk
                        Max Packet Size: 512
                        Interval: 0ms

                        Endpoint Address: 03
                        Direction: out
                        Attribute: 2
                        Type: Bulk
                        Max Packet Size: 512
                        Interval: 125us

dmesg shows:

usb-storage: *** thread sleeping.
usb-storage: queuecommand_lck called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage:  00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x5c1a L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x5c1a R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.



   * What outcome did you expect instead?

correct mount ;-)




-- System Information:
Debian Release: wheezy/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 
'experimental')
Architecture: i386 (i686)

Kernel: Linux 3.4.0 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) (ignored: LC_ALL 
set to de_DE.UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages mtpfs depends on:
ii  fuse-utils    2.9.0-1
ii  libc6         2.13-33
ii  libfuse2      2.9.0-1
ii  libglib2.0-0  2.32.3-1
ii  libid3tag0    0.15.1b-10
ii  libmad0       0.15.1b-7
ii  libmtp9       1.1.3-2
ii  libusb-1.0-0  2:1.0.11-1
ii  zlib1g        1:1.2.7.dfsg-11

mtpfs recommends no packages.

mtpfs suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Reply via email to