can i change description of error ? to
mii-tool: show wrong speed (ethtool show norm)
eth0 1000baseT-HD error (100Mb/s ok)
#mii-tool
eth0: negotiated 1000baseT-HD flow-control, link ok
eth1: negotiated 1000baseT-FD flow-control, link ok
eth2: negotiated 100baseTx-FD, link ok
eth3: negotiated 1000baseT-FD flow-control, link ok
eth4: negotiated 100baseTx-FD flow-control, link ok
#ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: d
Wake-on: d
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes
#lspci
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub
Interface (rev 02)
00:01.0 PCI bridge: Intel Corporation 82865G/PE/P AGP Bridge (rev 02)
00:06.0 System peripheral: Intel Corporation 82865G/PE/P Processor to I/O
Memory Interface (rev 02)
00:1d.0 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI
Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface
Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller
(rev 02)
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev
02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R)
AC'97 Audio Controller (rev 02)
02:00.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100
(rev 02)
02:01.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)
02:02.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet
Adapter (rev 11) (rev 11)
02:03.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast
Decoder (rev 01)
02:04.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet
Adapter (rev 11) (rev 11)
02:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Ethernet
Controller (rev 01)
# dmesg | grep -i eth
[ 3.045864] e100 0000:02:00.0: eth0: addr 0xfc000000, irq 21, MAC addr
00:60:94:a5:1e:df
[ 3.046936] skge 0000:02:02.0: eth1: addr 00:17:9a:b3:95:8d
[ 3.070853] skge 0000:02:04.0: eth3: addr 00:1c:f0:98:37:c3
[ 3.097066] e100 0000:02:08.0: eth4: addr 0xff968000, irq 20, MAC addr
00:13:20:3d:7a:50
[ 21.329036] i2c-core: driver [tuner] using legacy suspend method
[ 21.329050] i2c-core: driver [tuner] using legacy resume method
[ 24.002392] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 27.289917] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.292277] e100 0000:02:00.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[ 27.292565] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 27.541254] skge 0000:02:02.0: eth1: enabling interface
[ 27.795876] eth2: setting full-duplex.
[ 28.045712] skge 0000:02:04.0: eth3: enabling interface
[ 28.285135] ADDRCONF(NETDEV_UP): eth4: link is not ready
[ 28.288159] e100 0000:02:08.0: eth4: NIC Link is Up 100 Mbps Full Duplex
[ 28.288420] ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
[ 29.885987] skge 0000:02:02.0: eth1: Link is up at 1000 Mbps, full duplex,
flow control both
[ 30.427087] skge 0000:02:04.0: eth3: Link is up at 1000 Mbps, full duplex,
flow control none
[ 37.696011] eth0: no IPv6 routers present
[ 37.864023] eth2: no IPv6 routers present
[ 38.272023] eth1: no IPv6 routers present
[ 38.608026] eth3: no IPv6 routers present
[ 39.104023] eth4: no IPv6 routers present
[ 64.843041] device eth1 entered promiscuous mode
[ 64.857312] device eth2 entered promiscuous mode
[ 64.861023] device eth0 entered promiscuous mode
# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:60:94:a5:1e:df
inet addr:192.168.2.40 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::260:94ff:fea5:1edf/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1521677 errors:0 dropped:0 overruns:0 frame:0
TX packets:2121714 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:182353133 (173.9 MiB) TX bytes:2352676461 (2.1 GiB)
--
Г‘ óâà æåГГЁГҐГ¬,
Petr mailto:unicor...@hotbox.ru
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
