Anonymized nm-tool output attached. (Though it may look peculiar, AP #2
is indeed my router and I did not mix things up while anonymizing,
despite #3 having higher strength.
NetworkManager Tool
State: connected (global)
- Device: eth1 [[AP #2]] --------------------------------------------------
Type: 802.11 WiFi
Driver: ipw2200
State: connected
Default: yes
HW Address: [eth1 MAC]
Capabilities:
Wireless Properties
Wireless Access Points
[AP #1]: Infra, [AP #1 BSSID], Freq 2437 MHz, Rate 54 Mb/s,
Strength 67 WPA WPA2
[AP #2]: Infra, [AP #2 BSSID], Freq 2462 MHz, Rate 54 Mb/s,
Strength 70 WPA2
[AP #3]: Infra, [AP #3 BSSID], Freq 2437 MHz, Rate 54 Mb/s,
Strength 80 WEP
IPv4 Settings:
Address: 192.168.2.[???]
Prefix: 24 (255.255.255.0)
Gateway: 192.168.2.1
DNS: 192.168.2.1
- Device: eth0 -----------------------------------------------------------------
Type: Wired
Driver: b44
State: unavailable
Default: no
HW Address: [eth0 MAC]
Capabilities:
Carrier Detect: yes
Wired Properties
Carrier: off
