On Thu, Sep 29, 2005 at 07:03:02PM +0200, [EMAIL PROTECTED] wrote: > Package: installation-reports > > Debian-installer-version: 24.9.2005 from different mirrors (downloaded by > "Free Download manager) Is this the testing/unstable installer from that date?
> md5 sum was correct > uname -a: no shell prompt, didn't even get this far Available by switching to console 2 at almost any point during install. > Date: 29.9.2005 > Method: Booted from DVD-ROM (Secondary Master) > no boot parameters > > Machine: selfconstructed What motherboard/chipset? > Processor: Intel P4 3000 Mhz HT > Memory: 1GB in dual mode (Kingtson HyperX) > Root Device: Seagate SATA 80GB > Root Size/partition table: n/a > Disk configuration: 1. device: Seagate SATA 80GB > (2 Windows partitions) > 2. device: Seagate IDE 120GB > (first 15GB free, 2 further Windows partitions) > Output of lspci and lspci -n: n/a > > Base System Installation Checklist: > [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it > > Initial boot worked: [O] > Configure network HW: [O] > Config network: [O] > Detect CD: [O] > Load installer modules: [O] > Detect hard drives: [E] > Partition hard drives: [ ] > Create file systems: [ ] > Mount partitions: [ ] > Install base system: [ ] > Install boot loader: [ ] > Reboot: [ ] > > Comments/Problems: > > Installer stops at "Lade Programm f?r die Partitionierung" > status bar at 38% > "Durchsuche Festplatten..." Any chance the sata drive is on a sil3112 controller and having the known seagate sata+sil3112 problem? Len Sorensen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
