Package: installation-reports INSTALL REPORT
Debian-installer-version: wget http://cdimage.debian.org/pub/cdimage-testing/sid_d-i/sparc/20050128/sarge-sparc-netinst.iso uname -a: Linux ignore 2.4.27-1-sparc64 #1 Mon Aug 23 23:59:55 PDT 2004 sparc64 GNU/Linux Date: 2005-01-31 21:00 pst Method: netinst cd Machine: sun ultra 5 Processor: ultrasparc IIi 333mhz Memory: 256MB Root Device: IDE Root Size/partition table: 6GB Filesystem 1K-blocks Used Available Use% Mounted on /dev/hda2 5803268 169404 5339072 4% / tmpfs 127592 0 127592 0% /dev/shm /dev/hda1 90329 9170 76340 11% /boot Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Sun Microsystems Computer Corp. Ultra IIi 0000:00:01.0 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 13) 0000:00:01.1 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 13) 0000:01:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01) 0000:01:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01) 0000:01:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro 215GP (rev 5c) 0000:01:03.0 IDE interface: Silicon Image, Inc. (formerly CMD Technology Inc) PCI0646 (rev 03) 0000:00:00.0 0600: 108e:a000 0000:00:01.0 0604: 108e:5000 (rev 13) 0000:00:01.1 0604: 108e:5000 (rev 13) 0000:01:01.0 0680: 108e:1000 (rev 01) 0000:01:01.1 0200: 108e:1001 (rev 01) 0000:01:02.0 0300: 1002:4750 (rev 5c) 0000:01:03.0 0101: 1095:0646 (rev 03) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Had to replace hard drive before I could get it to partition. Installer could be nicer than "Could not mount ext3 filesystem" on hard drive errors. -- Blars Blarson [EMAIL PROTECTED] http://www.blars.org/blars.html With Microsoft, failure is not an option. It is a standard feature. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
