Package: installation-reports
INSTALL REPORT
Debian-installer-version: ~2005-01-11, +- 1 week
uname -a: Linux mailhub 2.6.8-2-686 #1 Sat Jan 8 16:50:08 EST 2005 i686
GNU/Linux
Date: 2005-01-25
Method: network install, using mirror.pacific.net.au, no proxy
Machine: Dell Dimension 4700
Processor: Intel(R) Pentium(R) 4 CPU 3.20GHz
Memory: 1GB
Root Device: SATA (WDC WD800JD-75JN) x 2 (raid-1)
Root Size/partition table: Feel free to paste the full partition
table, with notes on which partitions are mounted where.
/dev/sda1 1 31 248976 82 Linux swap
/dev/sda2 * 32 9726 77875087+ fd Linux raid autodetect
/dev/sdb1 1 31 248976 82 Linux swap
/dev/sdb2 * 32 9726 77875087+ fd Linux raid autodetect
sda2+sdb2 are configured for raid-1 and mounted as /
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 915G/P/GV Processor to I/O Controller
(rev 04)
0000:00:01.0 PCI bridge: Intel Corp. 915G/P/GV PCI Express Root Port (rev 04)
0000:00:02.0 VGA compatible controller: Intel Corp. 82915G Express Chipset
Family Graphics Controller (rev 04)
0000:00:02.1 Display controller: Intel Corp. 82915G Express Chipset Family
Graphics Controller (rev 04)
0000:00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI
Express Port 1 (rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3)
0000:00:1e.2 Multimedia audio controller: Intel Corp. 82801FB/FBM/FR/FW/FRW
(ICH6 Family) AC'97 Audio Controller (rev 03)
0000:00:1f.0 ISA bridge: Intel Corp. 82801FB/FR (ICH6/ICH6R) LPC Interface
Bridge (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE
Controller (rev 03)
0000:00:1f.2 IDE interface: Intel Corp. 82801FB/FW (ICH6/ICH6W) SATA Controller
(rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus
Controller (rev 03)
0000:03:08.0 Ethernet controller: Intel Corp.: Unknown device 1064 (rev 03)
0000:00:00.0 0600: 8086:2580 (rev 04)
0000:00:01.0 0604: 8086:2581 (rev 04)
0000:00:02.0 0300: 8086:2582 (rev 04)
0000:00:02.1 0380: 8086:2782 (rev 04)
0000:00:1c.0 0604: 8086:2660 (rev 03)
0000:00:1d.0 0c03: 8086:2658 (rev 03)
0000:00:1d.1 0c03: 8086:2659 (rev 03)
0000:00:1d.2 0c03: 8086:265a (rev 03)
0000:00:1d.3 0c03: 8086:265b (rev 03)
0000:00:1d.7 0c03: 8086:265c (rev 03)
0000:00:1e.0 0604: 8086:244e (rev d3)
0000:00:1e.2 0401: 8086:266e (rev 03)
0000:00:1f.0 0601: 8086:2640 (rev 03)
0000:00:1f.1 0101: 8086:266f (rev 03)
0000:00:1f.2 0101: 8086:2651 (rev 03)
0000:00:1f.3 0c05: 8086:266a (rev 03)
0000:03:08.0 0200: 8086:1064 (rev 03)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [E]
Comments/Problems:
Install worked great; the raid-1 configuration was a snap :) The only
problem I ran into was that my / was mounted as the 2nd partition, and
grub-installer installed grub using (hd0,0) as the boot partition.
manually changing that to (hd0,1) made everything work again.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
