Your message dated Thu, 01 May 2025 14:22:06 +0200 (CEST) with message-id <20250501122206.74158be2...@eldamar.lan> and subject line Closing this bug (BTS maintenance for src:linux bugs) has caused the Debian Bug report #882368, regarding please enable go7007 driver for x86 arch to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 882368: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=882368 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
--- Begin Message ---Package: src:linux Version: 4.13.4-2 Severity: normal debian/config/kernelarch-x86/config contains manual override for GO7007 media driver family: ## ## file: drivers/media/usb/go7007/Kconfig ## # CONFIG_VIDEO_GO7007 is not set Please reenable this driver for x86 architecture. -- Package-specific info: ** Version: Linux version 4.13.0-1-amd64 (debian-ker...@lists.debian.org) (gcc version 6.4.0 20171010 (Debian 6.4.0-8)) #1 SMP Debian 4.13.4-2 (2017-10-15) ** Command line: BOOT_IMAGE=/vmlinuz-4.13.0-1-amd64 root=/dev/mapper/rhovanion--vg-root ro pcie_port_pm=off quiet ** Tainted: PWO (4609) * Proprietary module has been loaded. * Taint on warning. * Out-of-tree module has been loaded. ** Kernel log: [217149.371629] usb 1-8: reset high-speed USB device number 4 using xhci_hcd [217149.382440] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [217149.382467] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [217149.388891] ata2.00: configured for UDMA/100 [217149.411577] ata1.00: configured for UDMA/100 [217149.631556] usb 1-5: reset high-speed USB device number 47 using xhci_hcd [217149.792849] restoring control 00000000-0000-0000-0000-000000000101/10/5 [217149.792852] restoring control 00000000-0000-0000-0000-000000000101/12/11 [217149.891628] usb 1-6: reset full-speed USB device number 49 using xhci_hcd [217150.031708] usb 1-6: device firmware changed [217150.031957] PM: resume of devices complete after 964.289 msecs [217150.032537] acpi LNXPOWER:04: Turning OFF [217150.032647] PM: Finishing wakeup. [217150.032648] OOM killer enabled. [217150.032649] Restarting tasks ... done. [217150.076940] usb 1-6: USB disconnect, device number 49 [217150.099113] pci_bus 0000:04: Allocating resources [217150.099130] pci_bus 0000:06: Allocating resources [217150.099151] pci_bus 0000:07: Allocating resources [217150.099176] pci_bus 0000:08: Allocating resources [217150.099639] pci_bus 0000:04: Allocating resources [217150.099653] pci_bus 0000:06: Allocating resources [217150.099673] pci_bus 0000:07: Allocating resources [217150.099698] pci_bus 0000:08: Allocating resources [217150.207372] usb 1-6: new full-speed USB device number 50 using xhci_hcd [217150.241432] pci_bus 0000:04: Allocating resources [217150.241446] pci_bus 0000:06: Allocating resources [217150.241464] pci_bus 0000:07: Allocating resources [217150.241483] pci_bus 0000:08: Allocating resources [217150.308682] bbswitch: disabling discrete graphics [217150.308694] ACPI Warning: \_SB.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95) [217150.352412] usb 1-6: New USB device found, idVendor=0cf3, idProduct=e005 [217150.352416] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [217150.353871] usb 1-6: firmware: direct-loading firmware ar3k/AthrBT_0x31010000.dfu [217150.391855] usb 1-6: firmware: direct-loading firmware ar3k/ramps_0x31010000_40.dfu [217150.396905] usb 1-6: USB disconnect, device number 50 [217150.443857] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [217150.459104] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [217150.481992] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [217150.529384] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [217150.699444] usb 1-6: new full-speed USB device number 51 using xhci_hcd [217155.135901] intel_pstate: Turbo disabled by BIOS or unavailable on processor [217155.170292] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [217155.247041] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=0 [217155.293445] r8169 0000:07:00.0 eth0: link down [217155.293536] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [217155.308841] EXT4-fs (sda2): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4 [217155.939367] usb 1-6: device descriptor read/64, error -110 [217161.336106] usb 1-6: New USB device found, idVendor=0cf3, idProduct=e005 [217161.336110] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [217161.530960] intel_pstate: Turbo disabled by BIOS or unavailable on processor [217161.830116] intel_pstate: Turbo disabled by BIOS or unavailable on processor [217162.085427] intel_pstate: Turbo disabled by BIOS or unavailable on processor [217162.387517] intel_pstate: Turbo disabled by BIOS or unavailable on processor [217162.671097] intel_pstate: Turbo disabled by BIOS or unavailable on processor [217162.942542] intel_pstate: Turbo disabled by BIOS or unavailable on processor [217192.454442] usb 1-1: new high-speed USB device number 52 using xhci_hcd [217192.766985] usb 1-1: New USB device found, idVendor=2304, idProduct=021d [217192.766990] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [217192.766993] usb 1-1: Product: DVC 130 [217192.766996] usb 1-1: Manufacturer: Pinnacle Systems, Inc. [217193.050545] intel_pstate: Turbo disabled by BIOS or unavailable on processor [217193.352728] intel_pstate: Turbo disabled by BIOS or unavailable on processor [217480.138951] usb 1-3: new high-speed USB device number 53 using xhci_hcd [217480.279520] usb 1-3: New USB device found, idVendor=15a9, idProduct=002d [217480.279525] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=10 [217480.279528] usb 1-3: Product: Modem YOTA 4G LTE [217480.279531] usb 1-3: Manufacturer: Yota Devices LTD [217480.279533] usb 1-3: SerialNumber: usb_serial_num_0 [217480.284617] cdc_ether 1-3:1.0 eth1: register 'cdc_ether' at usb-0000:00:14.0-3, CDC Ethernet Device, 1c:49:7b:3d:fb:8d [217480.441859] intel_pstate: Turbo disabled by BIOS or unavailable on processor [217480.757670] intel_pstate: Turbo disabled by BIOS or unavailable on processor [217480.875091] cdc_ether 1-3:1.0 enx1c497b3dfb8d: renamed from eth1 [217480.965050] IPv6: ADDRCONF(NETDEV_UP): enx1c497b3dfb8d: link is not ready [217480.965149] cdc_ether 1-3:1.0 enx1c497b3dfb8d: kevent 12 may have been dropped [217480.965160] cdc_ether 1-3:1.0 enx1c497b3dfb8d: kevent 12 may have been dropped [217480.997994] IPv6: ADDRCONF(NETDEV_UP): enx1c497b3dfb8d: link is not ready [217481.028749] intel_pstate: Turbo disabled by BIOS or unavailable on processor [217481.155696] IPv6: ADDRCONF(NETDEV_CHANGE): enx1c497b3dfb8d: link becomes ready [217481.155708] cdc_ether 1-3:1.0 enx1c497b3dfb8d: kevent 12 may have been dropped [217481.157647] cdc_ether 1-3:1.0 enx1c497b3dfb8d: kevent 12 may have been dropped [217495.219646] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [217810.267705] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [218125.260233] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [218440.235573] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [218755.237490] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [219070.227082] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [219385.099528] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [219700.144177] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [219747.373197] go7007: Unknown symbol v4l2_i2c_new_subdev_board (err 0) [219866.891596] go7007_usb: Unknown symbol go7007_read_addr (err 0) [219866.891811] go7007_usb: Unknown symbol go7007_snd_remove (err 0) [219866.891881] go7007_usb: Unknown symbol go7007_boot_encoder (err 0) [219866.891906] go7007_usb: Unknown symbol go7007_update_board (err 0) [219866.891949] go7007_usb: Unknown symbol go7007_parse_video_stream (err 0) [219866.892025] go7007_usb: Unknown symbol go7007_register_encoder (err 0) [219866.892046] go7007_usb: Unknown symbol go7007_alloc (err 0) [219866.892065] go7007_usb: Unknown symbol go7007_read_interrupt (err 0) [219875.582891] usbcore: registered new interface driver go7007 [219882.735399] usbcore: deregistering interface driver go7007 ** Model information sys_vendor: Dell Inc. product_name: Inspiron 5558 product_version: 01 chassis_vendor: Dell Inc. chassis_version: bios_vendor: Dell Inc. bios_version: A14 board_vendor: Dell Inc. board_name: 0745H3 board_version: A00 ** Loaded modules: go7007(O) v4l2_common cpuid cdc_acm snd_seq_dummy hid_generic usbhid snd_usb_audio snd_usbmidi_lib cdc_ether usbnet usbtv cmac snd_hrtimer snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device rfcomm ctr ccm cpufreq_conservative cpufreq_userspace cpufreq_powersave xt_HL xt_hl nft_chain_route_ipv4 ipt_MASQUERADE nf_nat_masquerade_ipv4 nft_compat nft_counter nft_meta nft_chain_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c nf_tables_ipv4 nf_tables nfnetlink bnep bbswitch(O) binfmt_misc nls_ascii nls_cp437 vfat fat ath3k btusb btrtl btbcm btintel bluetooth drbg ansi_cprng ecdh_generic uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 rtsx_usb_ms videobuf2_core videodev memstick media dell_wmi bridge stp llc sparse_keymap joydev iTCO_wdt wmi_bmof iTCO_vendor_support intel_rapl mxm_wmi snd_soc_rt5640 snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp kvm_intel dell_laptop dell_smbios snd_soc_ssm4567 snd_soc_rl6231 kvm dcdbas snd_hda_codec_realtek snd_soc_core dell_smm_hwmon snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core irqbypass snd_compress snd_hwdep snd_pcm_oss intel_cstate snd_mixer_oss efi_pstore snd_pcm intel_uncore i915 efivars snd_timer arc4 intel_rapl_perf ath9k ath9k_common ath9k_hw ath drm_kms_helper drm mac80211 pcspkr cfg80211 evdev serio_raw hid_multitouch dw_dmac snd_soc_sst_acpi sg snd lpc_ich snd_soc_sst_match battery elan_i2c dw_dmac_core dell_rbtn wmi mei_me video acpi_pad button ac mei soundcore spi_pxa2xx_platform rfkill shpchp i2c_algo_bit acpi_als kfifo_buf industrialio nfsd auth_rpcgss nfs_acl lockd grace sunrpc uinput dummy coretemp parport_pc ppdev lp parport efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb algif_skcipher af_alg dm_crypt dm_mod rtsx_usb_sdmmc rtsx_usb mfd_core sr_mod sd_mod cdrom i2c_hid hid crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd psmouse ahci libahci libata scsi_mod i2c_i801 ehci_pci r8169 xhci_pci ehci_hcd mii xhci_hcd usbcore usb_common thermal sdhci_acpi sdhci mmc_core i2c_designware_platform i2c_designware_core ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller [8086:0a04] (rev 0b) Subsystem: Dell Haswell-ULT DRAM Controller [1028:06ad] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: hsw_uncore 00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 0b) (prog-if 00 [VGA controller]) Subsystem: Dell Haswell-ULT Integrated Graphics Controller [1028:06ad] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 44 Region 0: Memory at f7400000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=64] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller [8086:0a0c] (rev 0b) Subsystem: Dell Haswell-ULT HD Audio Controller [1028:06ad] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at f7a14000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04) (prog-if 30 [XHCI]) Subsystem: Dell 8 Series USB xHCI HC [1028:06ad] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 41 Region 0: Memory at f7a00000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:16.0 Communication controller [0780]: Intel Corporation 8 Series HECI #0 [8086:9c3a] (rev 04) Subsystem: Dell 8 Series HECI [1028:06ad] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 45 Region 0: Memory at f7a1c000 (64-bit, non-prefetchable) [size=32] Capabilities: <access denied> Kernel driver in use: mei_me Kernel modules: mei_me 00:1b.0 Audio device [0403]: Intel Corporation 8 Series HD Audio Controller [8086:9c20] (rev 04) Subsystem: Dell 8 Series HD Audio Controller [1028:06ad] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at f7a10000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 1 [8086:9c10] (rev e4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: cf200000-cf3fffff Prefetchable memory behind bridge: 00000000cf400000-00000000cf5fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 3 [8086:9c14] (rev e4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 Memory behind bridge: f7900000-f79fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 4 [8086:9c16] (rev e4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 19 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f7800000-f78fffff Prefetchable memory behind bridge: 00000000f2100000-00000000f21fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.4 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 5 [8086:9c18] (rev e4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f6000000-f70fffff Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation 8 Series USB EHCI #1 [8086:9c26] (rev 04) (prog-if 20 [EHCI]) Subsystem: Dell 8 Series USB EHCI [1028:06ad] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 0: Memory at f7a1a000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1f.0 ISA bridge [0601]: Intel Corporation 8 Series LPC Controller [8086:9c45] (rev 04) Subsystem: Dell 8 Series LPC Controller [1028:06ad] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] [8086:9c03] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Dell 8 Series SATA Controller 1 [AHCI mode] [1028:06ad] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 42 Region 0: I/O ports at f0b0 [size=8] Region 1: I/O ports at f0a0 [size=4] Region 2: I/O ports at f090 [size=8] Region 3: I/O ports at f080 [size=4] Region 4: I/O ports at f060 [size=32] Region 5: Memory at f7a19000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 8 Series SMBus Controller [8086:9c22] (rev 04) Subsystem: Dell 8 Series SMBus Controller [1028:06ad] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f7a18000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f040 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 06:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter [168c:0036] (rev 01) Subsystem: Dell QCA9565 / AR9565 Wireless Network Adapter [1028:020e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f7900000 (64-bit, non-prefetchable) [size=512K] Expansion ROM at f7980000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k Kernel modules: ath9k 07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 07) Subsystem: Dell RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [1028:06ad] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 40 Region 0: I/O ports at e000 [size=256] Region 2: Memory at f7800000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at f2100000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 08:00.0 3D controller [0302]: NVIDIA Corporation GK208M [GeForce 920M] [10de:1299] (rev ff) (prog-if ff) !!! Unknown header type 7f Kernel modules: nvidia ** USB devices: Bus 003 Device 002: ID 8087:8000 Intel Corp. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 051: ID 0cf3:e005 Atheros Communications, Inc. Bus 001 Device 047: ID 064e:920b Suyin Corp. Bus 001 Device 053: ID 15a9:002d Gemtek WLTUBA-107 [Yota 4G LTE] Bus 001 Device 052: ID 2304:021d Pinnacle Systems, Inc. Dazzle DVC130 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.13.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8), LANGUAGE=en_GB:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.13.0-1-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.130 ii kmod 24-1 ii linux-base 4.5 Versions of packages linux-image-4.13.0-1-amd64 recommends: ii firmware-linux-free 3.4 ii irqbalance 1.2.0-0.2 Versions of packages linux-image-4.13.0-1-amd64 suggests: pn debian-kernel-handbook <none> ii extlinux 3:6.03+dfsg1-2 ii grub-efi-amd64 2.02-2 pn linux-doc-4.13 <none> Versions of packages linux-image-4.13.0-1-amd64 is related to: ii firmware-amd-graphics 20170823-1 ii firmware-atheros 20170823-1 pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux-nonfree 20170823-1 ii firmware-misc-nonfree 20170823-1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> ii firmware-realtek 20170823-1 pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---Hi This bug was filed for a (very) old kernel or the bug is old itself without resolution. Maybe it was for a feature enablement which nobody acted on. We are sorry we were not able to timely deal with this issue. There are many open bugs for the src:linux package and thus we are closing older bugs where it's unclear if they still occur in newer versions and are still relevant to the reporter. For an overview see: https://bugs.debian.org/src:linux . If you can reproduce your issue with - the current version in unstable/testing - the latest kernel from backports or, if it was a feature addition/wishlist and still consider it relevant, then: Please reopen the bug, see https://www.debian.org/Bugs/server-control for details. Please try to provide as much fresh details including kernel logs where relevant. In particular were an issue is coupled with specific hardware we might ask you to do additional debugging on your side as the owner of the hardware. Regards, Salvatore
--- End Message ---
