--- Begin Message ---
Package: linux-2.6
Version: 2.6.26-24lenny1
Severity: normal
Install of package reported an error - failed to preconfigure - due to
/tmp being mounted as noexec.
This was during an attempted upgrade to latest
linux-image-2.6.26-2-amd64 from lenny updates (recently).
Install log:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
Reading task descriptions... Done
The following packages will be upgraded:
linux-headers-2.6.26-2-amd64 linux-headers-2.6.26-2-common
linux-image-2.6.26-2-amd64 linux-libc-dev
4 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 25.8MB of archives. After unpacking 0B will be used.
Do you want to continue? [Y/n/?] y
Writing extended state information... Done
Get:1 http://security.debian.org lenny/updates/main linux-image-2.6.26-2-amd64
2.6.26-24lenny1 [20.9MB]
Get:2 http://security.debian.org lenny/updates/main
linux-headers-2.6.26-2-amd64 2.6.26-24lenny1 [392kB]
Get:3 http://security.debian.org lenny/updates/main
linux-headers-2.6.26-2-common 2.6.26-24lenny1 [3726kB]
Get:4 http://security.debian.org lenny/updates/main linux-libc-dev
2.6.26-24lenny1 [754kB]
Fetched 25.8MB in 23s (1084kB/s)
Preconfiguring packages ...
Can't exec "/tmp/linux-image-2.6.26-2-amd64.config.225381": Permission denied
at /usr/share/perl/5.10/IPC/Open3.pm line 168.
open2: exec of /tmp/linux-image-2.6.26-2-amd64.config.225381 configure
2.6.26-24 failed at /usr/share/perl5/Debconf/ConfModule.pm line 59
linux-image-2.6.26-2-amd64 failed to preconfigure, with exit status 255
(Reading database ... 159229 files and directories currently installed.)
Preparing to replace linux-image-2.6.26-2-amd64 2.6.26-24 (using
.../linux-image-2.6.26-2-amd64_2.6.26-24lenny1_amd64.deb) ...
The directory /lib/modules/2.6.26-2-amd64 still exists. Continuing as directed.
Done.
Unpacking replacement linux-image-2.6.26-2-amd64 ...
Running postrm hook script /sbin/update-grub.
Searching for GRUB installation directory ... found: /boot/grub
Searching for default file ... found: /boot/grub/default
Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst
Searching for splash image ... none found, skipping ...
Found kernel: /vmlinuz-2.6.26-2-amd64
Updating /boot/grub/menu.lst ... done
Preparing to replace linux-headers-2.6.26-2-amd64 2.6.26-24 (using
.../linux-headers-2.6.26-2-amd64_2.6.26-24lenny1_amd64.deb) ...
Unpacking replacement linux-headers-2.6.26-2-amd64 ...
Preparing to replace linux-headers-2.6.26-2-common 2.6.26-24 (using
.../linux-headers-2.6.26-2-common_2.6.26-24lenny1_amd64.deb) ...
Unpacking replacement linux-headers-2.6.26-2-common ...
Preparing to replace linux-libc-dev 2.6.26-24 (using
.../linux-libc-dev_2.6.26-24lenny1_amd64.deb) ...
Unpacking replacement linux-libc-dev ...
Setting up linux-image-2.6.26-2-amd64 (2.6.26-24lenny1) ...
Running depmod.
Running mkinitramfs-kpkg.
Not updating initrd symbolic links since we are being updated/reinstalled
(2.6.26-24 was configured last, according to dpkg)
Not updating image symbolic links since we are being updated/reinstalled
(2.6.26-24 was configured last, according to dpkg)
Running postinst hook script update-grub.
Searching for GRUB installation directory ... found: /boot/grub
Searching for default file ... found: /boot/grub/default
Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst
Searching for splash image ... none found, skipping ...
Found kernel: /vmlinuz-2.6.26-2-amd64
Updating /boot/grub/menu.lst ... done
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/dkms
Setting up linux-headers-2.6.26-2-common (2.6.26-24lenny1) ...
Setting up linux-headers-2.6.26-2-amd64 (2.6.26-24lenny1) ...
Setting up linux-libc-dev (2.6.26-24lenny1) ...
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
Reading task descriptions... Done
Current status: 0 updates [-4].
-- Package-specific info:
** Version:
Linux version 2.6.26-2-amd64 (Debian 2.6.26-24) (da...@debian.org) (gcc version
4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Sun Jun 20 20:16:30 UTC
2010
** Command line:
root=/dev/sda8 ro quiet
** Tainted: P (1)
* Proprietary module has been loaded.
** Kernel log:
[428245.811590] sd 9:0:0:0: [sdd] Mode Sense: 21 00 00 00
[428245.811590] sd 9:0:0:0: [sdd] Assuming drive cache: write through
[428245.811590] sdd: sdd1
[428245.823587] sd 9:0:0:0: [sdd] Attached SCSI disk
[441170.847475] hda: ide_cd_check_ireason: wrong transfer direction!
[443020.806449] kjournald starting. Commit interval 5 seconds
[443020.810080] EXT3 FS on sdd1, internal journal
[443020.810088] EXT3-fs: mounted filesystem with ordered data mode.
[443867.928164] hda: ide_cd_check_ireason: wrong transfer direction!
[465642.389073] kjournald starting. Commit interval 5 seconds
[465642.397592] EXT3 FS on sdd1, internal journal
[465642.397599] EXT3-fs: mounted filesystem with ordered data mode.
[465697.493292] kjournald starting. Commit interval 5 seconds
[465697.494317] EXT3 FS on sdd1, internal journal
[465697.494324] EXT3-fs: mounted filesystem with ordered data mode.
[465763.901264] kjournald starting. Commit interval 5 seconds
[465763.904937] EXT3 FS on sdd1, internal journal
[465763.904946] EXT3-fs: mounted filesystem with ordered data mode.
[466696.323813] npviewer.bin[19055]: segfault at 0 ip f64037d3 sp ffffca2c
error 4 in libflashplayer.so[f6135000+b2c000]
[466915.870509] kjournald starting. Commit interval 5 seconds
[466915.876450] EXT3 FS on sdd1, internal journal
[466915.876450] EXT3-fs: mounted filesystem with ordered data mode.
[466966.944640] kjournald starting. Commit interval 5 seconds
[466966.948641] EXT3 FS on sdd1, internal journal
[466966.948641] EXT3-fs: mounted filesystem with ordered data mode.
[467963.594329] kjournald starting. Commit interval 5 seconds
[467963.595151] EXT3 FS on sdd1, internal journal
[467963.595151] EXT3-fs: mounted filesystem with ordered data mode.
[516913.534770] kjournald starting. Commit interval 5 seconds
[516913.535090] EXT3 FS on sdd1, internal journal
[516913.535090] EXT3-fs: mounted filesystem with ordered data mode.
[547438.648692] hda: packet command error: status=0xd0 { Busy }
[547438.648692] ide: failed opcode was: unknown
[586111.102657] kjournald starting. Commit interval 5 seconds
[586111.109071] EXT3 FS on sdd1, internal journal
[586111.109078] EXT3-fs: mounted filesystem with ordered data mode.
[626046.346344] npviewer.bin[14521]: segfault at ff0a0000 ip ff0a0000 sp
ff0a0000 error 14
[651555.250125] kjournald starting. Commit interval 5 seconds
[651555.250125] EXT3 FS on sdd1, internal journal
[651555.250125] EXT3-fs: mounted filesystem with ordered data mode.
[676264.524445] kjournald starting. Commit interval 5 seconds
[676264.530983] EXT3 FS on sdd1, internal journal
[676264.530991] EXT3-fs: mounted filesystem with ordered data mode.
[685392.782217] r8169: eth0: link down
[685395.251761] r8169: eth0: link up
[685395.251761] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[685406.088050] eth0: no IPv6 routers present
[685429.026316] r8169: eth0: link down
[685431.010992] r8169: eth0: link up
[685431.010992] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[685452.220409] eth0: no IPv6 routers present
[685606.828213] r8169: eth0: link up
[685694.240366] r8169: eth0: link down
[685696.540874] r8169: eth0: link up
[685696.541392] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[685712.749765] eth0: no IPv6 routers present
[685835.116593] r8169: eth0: link down
[685837.327084] r8169: eth0: link up
[685837.327552] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[685856.234594] eth0: no IPv6 routers present
[770395.189681] kjournald starting. Commit interval 5 seconds
[770395.192012] EXT3 FS on sdd1, internal journal
[770395.192012] EXT3-fs: mounted filesystem with ordered data mode.
[812573.314305] npviewer.bin[2558]: segfault at ff0a0000 ip ff0a0000 sp
ff0a0000 error 14
[812856.935279] npviewer.bin[3241]: segfault at ff0a0000 ip ff0a0000 sp
ff0a0000 error 14
[814116.926739] hda: ide_cd_check_ireason: wrong transfer direction!
[815764.897706] npviewer.bin[8588]: segfault at c ip f5f3a313 sp ffff9360 error
4 in libplds4.so.0d[f5f39000+2000]
[830288.382136] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[830288.382142] vboxdrv: Successfully done.
[830288.382145] vboxdrv: Found 2 processor cores.
[830288.382182] VBoxDrv: dbg - g_abExecMemory=ffffffffa0c57000
[830288.382215] vboxdrv: fAsync=0 offMin=0x35c offMax=0xbcc
[830288.382283] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[830288.382287] vboxdrv: Successfully loaded version 3.2.4_OSE (interface
0x00140001).
[862921.934194] kjournald starting. Commit interval 5 seconds
[862921.940000] EXT3 FS on sdd1, internal journal
[862921.940000] EXT3-fs: mounted filesystem with ordered data mode.
[875842.443999] hda: ide_cd_check_ireason: wrong transfer direction!
[951659.529407] kjournald starting. Commit interval 5 seconds
[951659.536729] EXT3 FS on sdd1, internal journal
[951659.536737] EXT3-fs: mounted filesystem with ordered data mode.
[956406.347213] hda: packet command error: status=0xd0 { Busy }
[956406.347213] ide: failed opcode was: unknown
[964331.551317] npviewer.bin[22405]: segfault at c ip f5fe0313 sp ffff9410
error 4 in libplds4.so.0d[f5fdf000+2000]
[965806.048786] usb 4-4.2.4: new full speed USB device using ehci_hcd and
address 7
[965806.121026] usb 4-4.2.4: device descriptor read/64, error -32
[965806.244776] hub 4-4.2:1.0: unable to enumerate USB device on port 4
[965806.489037] usb 4-4.2.4: new high speed USB device using ehci_hcd and
address 8
[965806.612946] usb 4-4.2.4: configuration #1 chosen from 1 choice
[965806.616207] scsi10 : SCSI emulation for USB Mass Storage devices
[965806.616207] usb-storage: device found at 8
[965806.616207] usb-storage: waiting for device to settle before scanning
[965806.619995] usb 4-4.2.4: New USB device found, idVendor=0bb4, idProduct=0ff9
[965806.620000] usb 4-4.2.4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[965806.620004] usb 4-4.2.4: Product: Android Phone
[965806.620007] usb 4-4.2.4: Manufacturer: HTC
[965806.620010] usb 4-4.2.4: SerialNumber: HT97ML906878
[965812.153980] usb-storage: device scan complete
[965812.153980] scsi 10:0:0:0: Direct-Access HTC Android Phone 0100
PQ: 0 ANSI: 2
[965812.174513] sd 10:0:0:0: [sde] Attached SCSI removable disk
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: P35-S3
product_version:
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:
bios_vendor: Award Software International, Inc.
bios_version: F8
board_vendor: Gigabyte Technology Co., Ltd.
board_name: P35-S3
board_version: x.x
** Loaded modules:
Module Size Used by
vboxnetadp 9920 0
vboxnetflt 19472 0
vboxdrv 1789516 2 vboxnetadp,vboxnetflt
nvidia 9626312 28
ppdev 11656 0
parport_pc 31016 0
lp 14724 0
parport 41776 3 ppdev,parport_pc,lp
acpi_cpufreq 11792 0
cpufreq_conservative 11784 0
cpufreq_userspace 8452 0
cpufreq_powersave 6400 0
cpufreq_ondemand 11792 2
cpufreq_stats 9120 0
freq_table 9344 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
ipv6 288456 37
fuse 53184 1
coretemp 11008 0
it87 28952 0
hwmon_vid 7296 1 it87
loop 19468 0
snd_hda_intel 436696 1
snd_pcm_oss 41760 0
snd_mixer_oss 18816 1 snd_pcm_oss
snd_pcm 81800 2 snd_hda_intel,snd_pcm_oss
i2c_i801 13596 0
pcspkr 7040 0
i2c_core 27936 2 nvidia,i2c_i801
snd_seq_dummy 7428 0
snd_seq_oss 33152 0
snd_seq_midi 11072 0
snd_rawmidi 26784 1 snd_seq_midi
snd_seq_midi_event 11904 2 snd_seq_oss,snd_seq_midi
snd_seq 54304 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 25744 2 snd_pcm,snd_seq
snd_seq_device 11668 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 63688 11
snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 12064 1 snd
snd_page_alloc 13072 2 snd_hda_intel,snd_pcm
button 11680 0
intel_agp 31856 0
evdev 14208 3
ext3 125072 8
jbd 51240 1 ext3
mbcache 12804 1 ext3
ide_cd_mod 36360 0
cdrom 37928 1 ide_cd_mod
jmicron 6912 0 [permanent]
sd_mod 29376 12
ide_pci_generic 9220 0 [permanent]
ide_core 128284 3 ide_cd_mod,jmicron,ide_pci_generic
usbhid 45792 0
hid 41792 1 usbhid
ff_memless 9224 1 usbhid
usb_storage 95936 0
floppy 61800 0
ata_generic 10116 0
ahci 33036 9
r8169 36100 0
ehci_hcd 36108 0
libata 165600 2 ata_generic,ahci
scsi_mod 161016 3 sd_mod,usb_storage,libata
dock 14112 1 libata
uhci_hcd 25760 0
thermal 22688 0
processor 42304 2 acpi_cpufreq,thermal
fan 9352 0
thermal_sys 17728 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM
Controller [8086:29c0] (rev 02)
Subsystem: Giga-byte Technology Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI
Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f4000000-f7ffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e100 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e200 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fa104000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller [8086:293e] (rev 02)
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fa100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 4 [8086:2946] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fa000000-fa0fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 0000000080000000-00000000800fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e300 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e500 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fa105000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 00009000-00009fff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface
Controller [8086:2918] (rev 02)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 SATA controller [0106]: Intel Corporation 82801IB (ICH9) 4 port SATA
AHCI Controller [8086:2923] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Device [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 1275
Region 0: I/O ports at e600 [size=8]
Region 1: I/O ports at e700 [size=4]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e900 [size=4]
Region 4: I/O ports at ea00 [size=32]
Region 5: Memory at fa106000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller
[8086:2930] (rev 02)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fa107000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:0640]
(rev a1) (prog-if 00 [VGA controller])
Subsystem: CardExpert Technology Device [10b0:1401]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f4000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at b000 [size=128]
[virtual] Expansion ROM at f7000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia
03:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Device [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 5: Memory at fa000000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
03:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b000]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at c100 [size=4]
Region 2: I/O ports at c200 [size=8]
Region 3: I/O ports at c300 [size=4]
Region 4: I/O ports at c400 [size=16]
Capabilities: <access denied>
Kernel driver in use: JMicron IDE
Kernel modules: ata_generic, jmicron, ide-pci-generic
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Giga-byte Technology Device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 1274
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at f9000000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 80000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
** USB devices:
Bus 004 Device 008: ID 0bb4:0ff9 High Tech Computer Corp.
Bus 004 Device 006: ID 1058:1001 Western Digital Technologies, Inc. External
Hard Disk [Elements]
Bus 004 Device 005: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 004 Device 004: ID 046d:c062 Logitech, Inc.
Bus 004 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 5.0.5
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-2-amd64 recommends no packages.
Versions of packages linux-image-2.6.26-2-amd64 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
Versions of packages linux-image-2.6.26-2-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information excluded
--- End Message ---
