Package: installation-reports Debian-installer-version: beta3 <http://www.debian.org/devel/debian-installer/> uname -a: Linux darkbox 2.4.25 #1 sab mar 20 18:38:08 CET 2004 i686 GNU/Linux Date: 19 March 2004 at 9 pm Method: just pressing enter at the boot promt and having a base installation from the cd (not from the network)
Machine: Desktop Processor: 800Mhz Memory: 384MB SRAM Root Device: EIDE-ATAPI Vendor: HL-DT-ST Model: CD-RW GCE-8240B Rev: 1.07 Root Size/partition table: Filesystem Dimens. Usati Disp. Uso% Montato su /dev/hda1 1,9G 72M 1,7G 5% / /dev/hda6 7,4G 1,6G 5,5G 22% /usr /dev/hda7 4,6G 551M 3,9G 13% /var /dev/hda8 4,7G 267M 4,4G 6% /home Output of lspci: 00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev 44) 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] (rev 23) 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 10) 00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 11) 00:07.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management (rev 30) 00:09.0 Communication controller: Analog Devices SM56 PCI modem 00:0a.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08) 00:0c.0 Ethernet controller: Winbond Electronics Corp W89C940 (rev 0b) 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS Base System Installation Checklist: Initial boot worked: [O ] Configure network HW: [ O] Config network: [ ] Detect CD: [ O] Load installer modules: [ O] Detect hard drives: [ O] Partition hard drives: [ O] Create file systems: [ O] Mount partitions: [ O] Install base system: [ O] Install boot loader: [ O] Reboot: [ O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: I didn't find any kind of problems during the test on my machine. The problems started after the reboot during the base-config. Great job! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
