> Here you go...
> 
>> root@sheeva:~# rmmod mv_cesa
>> root@sheeva:~# modprobe marvell_cesa allhwsupport=1
>> root@sheeva:~# dmesg | tail -n 20
>> [   16.730426] systemd[1]: Mounted Debug File System.
>> [   16.756783] systemd[1]: Started Load Kernel Modules.
>> [   16.776948] systemd[1]: Started Create list of required static device 
>> nodes for the current kernel.
>> [   16.804146] systemd[1]: Started LSB: Set console font and keymap.
>> [   17.023950] systemd[1]: Started Journal Service.
>> [   18.514731] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
>> [   19.804133] orion_wdt: Initial timeout 21 sec
>> [   19.848469] MV-CESA:Could not register sha1 driver
>> [   19.848485] MV-CESA:Could not register hmac-sha1 driver
>> [   20.379009] systemd-journald[180]: Received request to flush runtime 
>> journal from PID 1
>> [   20.386082] sd 0:0:0:0: Attached scsi generic sg0 type 0
>> [   20.386886] ses 0:0:0:1: Attached scsi generic sg1 type 13
>> [   21.518406] EXT4-fs (mmcblk0p1): mounting ext2 file system using the ext4 
>> subsystem
>> [   21.682097] EXT4-fs (mmcblk0p1): mounted filesystem without journal. 
>> Opts: (null)
>> [   22.402713] Adding 9764860k swap on /dev/mapper/sheeva-swap.  Priority:-1 
>> extents:1 across:9764860k FS
>> [   22.938703] EXT4-fs (dm-2): mounted filesystem with ordered data mode. 
>> Opts: (null)
>> [   23.631978] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>> [   27.662122] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, 
>> full duplex, flow control disabled
>> [   27.662180] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>> [   37.350057] warning: process `colord-sane' used the deprecated sysctl 
>> system call with 8.1.2.
>> root@sheeva:~# uname -a
>> Linux sheeva 4.4.0-trunk-marvell #1 Debian 4.4.1-1~exp1 (2016-02-10) 
>> armv5tel GNU/Linux
>> root@sheeva:~# 
> 
> For what it's worth, the system boots fine and appears to run OK with the 4.4 
> kernel.
> 
> Hope it helps!
> 
> Rick

A bit more info, incase it helps...

Rick

> root@sheeva:~# cat /proc/cpuinfo 
> processor     : 0
> model name    : Feroceon 88FR131 rev 1 (v5l)
> BogoMIPS      : 1185.79
> Features      : swp half thumb fastmult edsp 
> CPU implementer       : 0x56
> CPU architecture: 5TE
> CPU variant   : 0x2
> CPU part      : 0x131
> CPU revision  : 1
> 
> Hardware      : Marvell Kirkwood (Flattened Device Tree)
> Revision      : 0000
> Serial                : 0000000000000000
> root@sheeva:~# 

Reply via email to