On Mon, 19 May 2014 08:33:07 -0400 "Lennart Sorensen" <[email protected]> wrote:
> On Mon, May 19, 2014 at 09:54:38AM +0100, RichardBown wrote: > > On Sun, 18 May 2014 19:55:11 -0400 > > "Lennart Sorensen" <[email protected]> wrote: > > > > > On Mon, May 19, 2014 at 12:49:44AM +0100, RichardBown wrote: > > > > On Sun, 18 May 2014 19:44:22 -0400 > > > > "Lennart Sorensen" <[email protected]> wrote: > > > > > > > > > On Mon, May 19, 2014 at 12:24:33AM +0100, RichardBown wrote: > > > > > > Hi > > > > > > > > > > > > As the squeeze version of debootstrap is sitting in the > > > > > > flash and cant be over written > > > > > > I've edited the kirwood.debian-wheezy.sh > > > > > > > > > > > > DEB_MIRROR="http://cdn.debian.net/debian"; > > > > > > > > > > > > MKE2FS_URL="$MIRROR/debian/mke2fs" > > > > > > PKGDETAILS_URL="$MIRROR/debian/pkgdetails" > > > > > > URL_UBOOT="http://projects.doozan.com/uboot/install_uboot_mtd0.sh"; > > > > > > #DEBOOTSTRAP_VERSION=$(wget -q > > > > > > "$DEB_MIRROR/pool/main/d/debootstrap/?C=M;O=D" -O- | grep -o > > > > > > 'debootstrap[^"]*all.deb' | head -n1) > > > > > > #DEBOOTSTRAP_VERSION=$(wget -q > > > > > > "$DEB_MIRROR/pool/main/d/debootstrap/?C=M;O=D" -O- | grep -v > > > > > > squeeze | grep -o 'debootstrap[^"]*all.deb' | head -n1 ) > > > > > > #URL_DEBOOTSTRAP="$DEB_MIRROR/pool/main/d/debootstrap/$DEBOOTSTRAP_VERSION" > > > > > > URL_DEBOOTSTRAP="$DEB_MIRROR/pool/main/d/debootstrap/debootstrap_1.0.60_all.deb" > > > > > > > > > > > > # > > > > > > # Download debootstrap > > > > > > # > > > > > > ########## > > > > > > ########## > > > > > > > > > > > > #if [ ! -e /usr/sbin/debootstrap ]; then > > > > > > mkdir /tmp/debootstrap > > > > > > cd /tmp/debootstrap > > > > > > wget -O debootstrap.deb $URL_DEBOOTSTRAP > > > > > > ar xv debootstrap.deb > > > > > > tar xzvf data.tar.gz > > > > > > > > > > > > if [ "$RO_ROOT" = "1" ]; then > > > > > > mount -o remount,rw / > > > > > > fi > > > > > > # mv ./usr/sbin/debootstrap /usr/sbin > > > > > > # mv ./usr/share/debootstrap /usr/share > > > > > > > > > > You need those two lines to extract the new version though. > > > > > > > > > > > install "$PKGDETAILS" "$PKGDETAILS_URL" 755 > > > > > > > > > > > > if [ "$RO_ROOT" = "1" ]; then > > > > > > mount -o remount,ro / > > > > > > fi > > > > > > #fi > > > > > > > > > > That should do it. Just removing the if should fix it for > > > > > you. > > > > > > > > > > > > > Thanks > > > > nearly there, just what decompresses data.tar.xz ? > > > > > > > > tar doesn't like it > > > > > > > > Many thanks for the help so far, must get to bed > > > > > > Oh crap, that's a modern deb format with xz compression. Does > > > that also happen if you leave it at using the 1.0.48 wheezy > > > version? As far as I can tell the wheezy version is a > > > data.tar.gz so it should work with the script, which the new > > > debootstrap version won't. > > > > > > > Yes going back to 1.0.48 allows decompression of the file. > > > > But then hits another problem > > > > ## Valid uBoot detected: [pinkpogo davygravy-2012-02-20-current] > > ## The newest uBoot is already installed on mtd0. > > > > # uBoot installation has completed successfully. > > Setting up swapspace version 1, size = 407715840 bytes > > Connecting to cdn.debian.net (83.142.228.128:80) > > debootstrap.deb 100% |*****************************| 60598 > > --:--:-- ETA rw-r--r-- 0/0 4 Jun 3 15:00 2013 debian-binary > > rw-r--r-- 0/0 1190 Jun 3 15:00 2013 control.tar.gz > > rw-r--r-- 0/0 59215 Jun 3 15:00 2013 data.tar.gz > > ./ > > ./usr/ > > ./usr/sbin/ > > ./usr/sbin/debootstrap > > ./usr/share/ > > ./usr/share/doc/ > > ./usr/share/doc/debootstrap/ > > ./usr/share/doc/debootstrap/README > > ./usr/share/doc/debootstrap/copyright > > ./usr/share/doc/debootstrap/changelog.gz > > ./usr/share/man/ > > ./usr/share/man/man8/ > > ./usr/share/man/man8/debootstrap.8.gz > > ./usr/share/debootstrap/ > > ./usr/share/debootstrap/scripts/ > > ./usr/share/debootstrap/scripts/sarge.buildd > > ./usr/share/debootstrap/scripts/dapper > > ./usr/share/debootstrap/scripts/feisty > > ./usr/share/debootstrap/scripts/woody > > ./usr/share/debootstrap/scripts/hoary.buildd > > ./usr/share/debootstrap/scripts/potato > > ./usr/share/debootstrap/scripts/warty.buildd > > ./usr/share/debootstrap/scripts/breezy > > ./usr/share/debootstrap/scripts/sid > > ./usr/share/debootstrap/scripts/gutsy > > ./usr/share/debootstrap/scripts/sarge > > ./usr/share/debootstrap/scripts/edgy > > ./usr/share/debootstrap/scripts/hoary > > ./usr/share/debootstrap/scripts/warty > > ./usr/share/debootstrap/scripts/sarge.fakechroot > > ./usr/share/debootstrap/scripts/woody.buildd > > ./usr/share/debootstrap/functions > > ./usr/share/debootstrap/devices.tar.gz > > ./usr/share/debootstrap/scripts/raring > > ./usr/share/debootstrap/scripts/intrepid > > ./usr/share/debootstrap/scripts/stable > > ./usr/share/debootstrap/scripts/wheezy > > ./usr/share/debootstrap/scripts/etch-m68k > > ./usr/share/debootstrap/scripts/unstable > > ./usr/share/debootstrap/scripts/oldstable > > ./usr/share/debootstrap/scripts/jaunty > > ./usr/share/debootstrap/scripts/lenny > > ./usr/share/debootstrap/scripts/precise > > ./usr/share/debootstrap/scripts/hardy > > ./usr/share/debootstrap/scripts/maverick > > ./usr/share/debootstrap/scripts/quantal > > ./usr/share/debootstrap/scripts/squeeze > > ./usr/share/debootstrap/scripts/lucid > > ./usr/share/debootstrap/scripts/karmic > > ./usr/share/debootstrap/scripts/jessie > > ./usr/share/debootstrap/scripts/oneiric > > ./usr/share/debootstrap/scripts/testing > > ./usr/share/debootstrap/scripts/natty > > ./usr/share/debootstrap/scripts/etch > > mv: cannot remove '/usr/share/debootstrap': Is a directory > > # checking for /usr/share/debootstrap/pkgdetails... > > > > > > # Starting debootstrap installation > > ./kirkwood.debian-wheezy8.sh: line 358: /tmp/bootstrap/debootstrap: > > No such file or directory debootstrap failed. > > > > > > I can see why, as it chroots, it cant see /tmp any more :( > > I suspect the answer may be to force uboot to be reinstalled, which > > maybe will flush out /usr/bin/. may also turn it in to a brick. > > > > or to add a path statement to get /tmp/bootstrap found ???? > > Hmm, I think the cleanup before trying the script again may have to > be: > > rm -rf /usr/sbin/debootstrap /usr/share/debootstrap > > I think it is failing to install the new debootstrap because the > directory already exists in /usr/share and it won't overwrite it. > HI Len, You are up early , I thing the hardware is OK, I can still plug in the USB stick with Arch linux on it and it boots and runs. I wish I could erase whats in the flash in both /usr/sbin and usr/share but rm -f fails, with RO file system message. I've rebooted several times, and checked whats there, Strangely running the uboot installer allowed the debootstrap to be up dated from 1.026 to 1.0.48. I've pasted it below:_ # Version 1.1 [6/2/2012] Download files from download.doozan.com VALID_UBOOT_MD5=http://jeff.doozan.com/uboot/valid-uboot.md5 # It is NOT a good idea to start your own mirror # You should leave this as-is MIRROR=http://download.doozan.com/uboot UBOOT_MTD0_BASE_URL=$MIRROR/files/uboot/uboot.mtd0 # .platform.version.kwb will be appended to this UBOOT_ENV_URL=$MIRROR/files/environment/uboot.environment BLPARAM_URL=$MIRROR/blparam NANDDUMP_URL=$MIRROR/nanddump NANDWRITE_URL=$MIRROR/nandwrite FLASH_ERASE_URL=$MIRROR/flash_erase FW_PRINTENV_URL=$MIRROR/fw_printenv FW_CONFIG_URL=$MIRROR/fw_env.config UBOOT_MTD0=/tmp/uboot.mtd0.kwb UBOOT_ORIGINAL=/uboot-original-mtd0.kwb UBOOT_ENV=/tmp/uboot.environment BLPARAM=/usr/sbin/blparam NANDDUMP=/usr/sbin/nanddump NANDWRITE=/usr/sbin/nandwrite FLASH_ERASE=/usr/sbin/flash_erase FW_PRINTENV=/usr/sbin/fw_printenv FW_SETENV=/usr/sbin/fw_setenv FW_CONFIG=/etc/fw_env.config verify_md5 () { local file=$1 local md5=$2 local check_md5=$(cat "$md5" | cut -d' ' -f1) local file_md5=$(md5sum "$file" | cut -d' ' -f1) if [ "$check_md5" = "$file_md5" ]; then return 0 else return 1 fi } download_and_verify () { local file_dest=$1 local file_url=$2 local md5_dest="$file_dest.md5" local md5_url="$file_url.md5" # Always download a fresh MD5, in case a newer version is available if [ -f "$md5_dest" ]; then rm -f "$md5_dest"; fi wget -O "$md5_dest" "$md5_url" # retry the download if it failed if [ ! -f "$md5_dest" ]; then wget -O "$md5_dest" "$md5_url" if [ ! -f "$md5_dest" ]; then return 1 # Could not get md5 fi fi # If the file already exists, check the MD5 if [ -f "$file_dest" ]; then verify_md5 "$file_dest" "$md5_dest" if [ "$?" -ne "0" ]; then rm -f "$md5_dest" return 0 else rm -f "$file_dest" fi fi # Download the file wget -O "$file_dest" "$file_url" # retry the download if it failed verify_md5 "$file_dest" "$md5_dest" if [ "$?" -ne "0" ]; then # Download failed or MD5 did not match, try again if [ -f "$file_dest" ]; then rm -f "$file_dest"; fi wget -O "$file_dest" "$file_url" verify_md5 "$file_dest" "$md5_dest" if [ "$?" -ne "0" ]; then rm -f "$md5_dest" return 1 fi fi rm -f "$md5_dest" return 0 } install () { local file_dest=$1 local file_url=$2 local file_pmask=$3 # Permissions mask echo "# checking for $file_dest..." # Install target file if it doesn't already exist if [ ! -s "$file_dest" ]; then echo "" echo "# Installing $file_dest..." # Check for read-only filesystem by testing # if we can delete the existing 0 byte file # or, if we can create a 0 byte file local is_readonly=0 if [ -f "$file_dest" ]; then rm -f "$file_dest" 2> /dev/null else touch "$file_dest" 2> /dev/null fi if [ "$?" -ne "0" ]; then local is_readonly=0 mount -o remount,rw / fi rm -f "$file_dest" 2> /dev/null download_and_verify "$file_dest" "$file_url" if [ "$?" -ne "0" ]; then echo "## Could not install $file_dest from $file_url, exiting." if [ "$is_readonly" = "1" ]; then mount -o remount,ro / fi exit 1 fi chmod $file_pmask "$file_dest" chmod $file_pmask "$file_dest" if [ "$is_readonly" = "1" ]; then mount -o remount,ro / fi echo "# Successfully installed $file_dest." fi return 0 } # Parse command line for i in $* do case $i in --force-platform=*) FORCE_PLATFORM=`echo $i | sed 's/[-a-zA-Z0-9]*=//'` echo "Forcing platform to [$FORCE_PLATFORM]" ;; --no-uboot-check) NO_UBOOT_CHECK=1 ;; *) ;; esac done if [ "$NOPROMPT" != "1" ]; then echo "" echo "" echo "!!!!!! DANGER DANGER DANGER DANGER DANGER DANGER !!!!!!" echo "" echo "If you lose power to your device while running this script," echo "it could be left in an unusable state." echo "" echo "This script will replace the bootloader on /dev/mtd0." echo "" echo "This installer will only work on the following devices:" echo " Seagate Dockstar" echo " Seagate GoFlex Net" echo " Seagate GoFlex Home" echo " Pogoplug v1" echo " Pogoplug Pink (v2)" echo "Do not run this installer on any other device." echo "" echo "By typing ok, you agree to assume all liabilities and risks " echo "associated with running this installer." echo "" echo -n "If you agree, type 'ok' and press ENTER to continue: " read IS_OK if [ "$IS_OK" != "OK" -a "$IS_OK" != "Ok" -a "$IS_OK" != "ok" ]; then echo "Exiting. uBoot was not installed." exit 1 fi fi install "$NANDWRITE" "$NANDWRITE_URL" 755 install "$NANDDUMP" "$NANDDUMP_URL" 755 install "$FLASH_ERASE" "$FLASH_ERASE_URL" 755 install "$FW_PRINTENV" "$FW_PRINTENV_URL" 755 install "$FW_CONFIG" "$FW_CONFIG_URL" 644 if [ ! -f "$FW_SETENV" ]; then ln -s "$FW_PRINTENV" "$FW_SETENV" 2> /dev/null if [ "$?" -ne "0" ]; then mount -o remount,rw / ln -s "$FW_PRINTENV" "$FW_SETENV" mount -o remount,ro / fi fi # Dump existing uBoot and compare it to a database of known versions echo "" echo "# Validating existing uBoot..." # dump the first 512k of mtd0 to /tmp $NANDDUMP --noecc --omitoob -l 0x80000 -f /tmp/uboot-mtd0-dump /dev/mtd0 wget -O "/tmp/valid-uboot.md5" "$VALID_UBOOT_MD5" UPDATE_UBOOT=1 UBOOT_PLATFORM= CURRENT_UBOOT_MD5=$(md5sum "/tmp/uboot-mtd0-dump" | cut -d' ' -f1) UBOOT_DETAILS=$(grep $CURRENT_UBOOT_MD5 /tmp/valid-uboot.md5 | head -1) if [ "$UBOOT_DETAILS" != "" ]; then UBOOT_PLATFORM=$(echo $UBOOT_DETAILS | sed 's/^\w* \(\w*\) .*$/\1/') UBOOT_VERSION=$(echo $UBOOT_DETAILS | sed 's/^\w* \w* \(.*\)$/\1/') echo "## Valid uBoot detected: [$UBOOT_PLATFORM $UBOOT_VERSION]" else echo "## Unknown uBoot detected on mtd0: $CURRENT_UBOOT_MD5" echo "##" if [ "$NO_UBOOT_CHECK" != "1" ]; then echo "## The installer could not detect the version of your current uBoot" echo "## This may happen if you have installed a different uBoot on" echo "## /dev/mtd0 or if you have bad blocks on /dev/mtd0" echo "##" echo "## If you have bad blocks on mtd0, you should not try to install uBoo t." # echo "##" # echo "## If you have installed a diffirent uBoot on mtd0, and understand t he" # echo "## risks, you can re-run the installer with the --no-uboot-check par ameter" echo "##" echo "## Installation cancelled." rm "/tmp/valid-uboot.md5" exit 1 else echo "## --no-uboot-check flag detected, continuing installation" while [ "$UBOOT_PLATFORM" = "" ]; do echo "" echo "############################################" echo "Your device could not be auto-detected." echo "" echo "You must be using a device listed below to run this installer." echo "" echo "What device are you using? Type the number of your device and press ENTER." echo "1 - Seagate Dockstar" echo "2 - Seagate GoFlex Net" echo "3 - Seagate GoFlex Home" echo "4 - Pogoplug v1" echo "5 - Pogoplug v2 - Pink" echo "6 - Other" read device if [ "$device" = "1" ]; then echo "Selected Dockstar" UBOOT_PLATFORM="dockstar" UBOOT_VERSION="unknown" elif [ "$device" = "2" ]; then echo "Selected Seagate GoFlex Net" UBOOT_PLATFORM="goflexnet" UBOOT_VERSION="unknown" elif [ "$device" = "3" ]; then echo "Selected Seagate GoFlex Home" UBOOT_PLATFORM="goflexhome" UBOOT_VERSION="unknown" elif [ "$device" = "4" ]; then echo "Selected Pogoplug v1" UBOOT_PLATFORM="pogov1" UBOOT_VERSION="unknown" elif [ "$device" = "5" ]; then echo "Selected Pogoplug v2 - Pink" UBOOT_PLATFORM="pinkpogo" UBOOT_VERSION="unknown" elif [ "$device" = "6" ]; then echo "Selected Other Device, exiting" echo "This installer is only compatible with the listed devices." exit 1 else echo "Invalid Input" fi done fi fi if [ "$FORCE_PLATFORM" != "" -a "$FORCE_PLATFORM" != "$UBOOT_PLATFORM" ]; then echo "## --force-platform paramater [$FORCE_PLATFORM] does not match detected platform [$UBOOT_PLATFORM]." echo -n "Are you sure your device is a "$FORCE_PLATFORM"? [y/N] " read FORCE if [ "$FORCE" = "y" -o "$FORCE" = "Y" ]; then echo "## Forcing installation of [$FORCE_PLATFORM] platform" UBOOT_PLATFORM=$FORCE_PLATFORM UBOOT_VERSION="unknown" else echo "## Exiting. No changes were made to mtd0." exit 1 fi fi UBOOT_IS_CURRENT=$(echo $UBOOT_VERSION | grep -c current) if [ "$UBOOT_IS_CURRENT" = "1" ]; then echo "## The newest uBoot is already installed on mtd0." UPDATE_UBOOT=0 else UBOOT_CURRENT=$(grep $UBOOT_PLATFORM /tmp/valid-uboot.md5 | grep current | he ad -1 | sed 's/^\w* \w* \(.*\)-current$/\1/') fi rm "/tmp/valid-uboot.md5" # If this is the first time this installer has been run in the # original Pogoplug enviroment, check if the user wants to disable # the Pogoplug services if [ -d /usr/local/cloudengines/ -a ! -e $UBOOT_ORIGINAL ]; then killall hbwd echo "" echo "" echo "" echo "DISABLE POGOPLUG SERVICES" echo "" echo "The pogoplug service includes an auto-update feature which could" echo "be used to cripple or disable your device. It is recommended" echo "that you disable this service." echo "" echo "NOTE: The pogoplug service is proprietary software" echo "created by Cloud Engines. It is not available for use" echo "in other distributions and will not be available in" echo "your new linux installation even if you choose not to disable it." echo "" echo -n "Would you like to disable the pogoplug services? [Y/n] " read DISABLE if [ "$DISABLE" = "" -o "$DISABLE" = "y" -o "$DISABLE" = "Y" ]; then echo "Applying fixes to the pogoplug environment..." mount -o rw,remount / # Add /sbin to the path and cleanup the shell prompt if [ ! -f /root/.bash_profile ]; then echo -e \ " export PATH='/usr/bin:/bin:/sbin' " > /root/.bash_profile fi chmod go+w /dev/null # Re-enable dropbear (updated dockstars only) sed -i 's/^#\/usr\/sbin\/dropbear/\/usr\/sbin\/dropbear/' /etc/init.d/db > /dev/null 2>&1 echo "Disabling the pogoplug service..." # Comment out the line that starts hmbgr.sh sed -i 's/^\/etc\/init.d\/hbmgr.sh start/#Uncomment the line below to enabl e the pogoplug service\n#\/etc\/init.d\/hbmgr.sh start/' /etc/init.d/rcS mount -o ro,remount / echo "Done fixing pogoplug environment." echo "" fi UBOOT_ORIGINAL_URL="$UBOOT_MTD0_BASE_URL.$UBOOT_PLATFORM.original.kwb" export PS1='\h:\w\$ ' install "$UBOOT_ORIGINAL" "$UBOOT_ORIGINAL_URL" 644 install "$BLPARAM" "$BLPARAM_URL" 755 if [ "$UBOOT_PLATFORM" = "pinkpogo" ]; then BOOTCMD='nand read.e 0x800000 0x100000 0x200000; setenv bootargs $(console) $(bootargs_root); bootm 0x800000' # dockstar, goflex, and pogov1 have the same bootcmd else BOOTCMD='nand read.e 0x800000 0x100000 0x300000; setenv bootargs $(conso le) $(bootargs_root); bootm 0x800000' fi $BLPARAM "bootcmd=$BOOTCMD" > /dev/null 2>&1 # Preserve the MAC address ENV_ETHADDR=`$BLPARAM | grep "^ethaddr=" | cut -d'=' -f 2-` fi # Download and install the latest uBoot if [ "$UPDATE_UBOOT" = "1" ]; then echo "" echo "# Installing uBoot" UBOOT_MTD0_URL="$UBOOT_MTD0_BASE_URL.$UBOOT_PLATFORM.$UBOOT_CURRENT.kwb" echo "## Installing $UBOOT_PLATFORM $UBOOT_CURRENT" if [ -f "$UBOOT_MTD0" ]; then rm "$UBOOT_MTD0"; fi download_and_verify "$UBOOT_MTD0" "$UBOOT_MTD0_URL" if [ "$?" -ne "0" ]; then echo "## uBoot could not be downloaded, or the MD5 does not match." echo "## Exiting. No changes were made to mtd0." exit 1 fi # Write new uBoot to mtd0 # Erase the first 512k $FLASH_ERASE /dev/mtd0 0 4 $NANDWRITE /dev/mtd0 $UBOOT_MTD0 # dump mtd0 and compare the checksum, to make sure it installed properly $NANDDUMP --noecc --omitoob -l 0x80000 -f /tmp/mtd0.uboot /dev/mtd0 echo "## Verifying new uBoot..." if [ -f "$UBOOT_MTD0.md5" ]; then rm "$UBOOT_MTD0.md5"; fi wget -O "$UBOOT_MTD0.md5" "$UBOOT_MTD0_URL.md5" verify_md5 "/tmp/mtd0.uboot" "$UBOOT_MTD0.md5" if [ "$?" -ne "0" ]; then rm -f "$UBOOT.md5" echo "##" echo "##" echo "## VERIFICATION FAILED!" echo "##" echo "## uBoot was not properly installed to mtd0." echo "##" echo "##" echo "## YOUR DEVICE MAY BE IN AN UNUSABLE STATE." echo "## DO NOT REBOOT OR POWER OFF YOUR DEVICE" echo "##" echo "##" echo "## Make a backup of /tmp/uboot-mtd0-dump someplace safe and" echo "## then re-run this installer." exit 1 else echo "# Verified successfully!" fi rm -f "$UBOOT_MTD0.md5" fi if [ "$UPDATE_UBOOT" = "0" ]; then UPDATE_UBOOT_ENVIRONMENT=0 elif [ "$UBOOT_VERSION" = "original" -o "$UBOOT_VERSION" = "unknown" ]; then UPDATE_UBOOT_ENVIRONMENT=1 else # Updating uboot, but it's from a known "new" uboot, no need to reset the environment UPDATE_UBOOT_ENVIRONMENT=0 fi if [ "$UPDATE_UBOOT_ENVIRONMENT" = "0" -a "$1" != "--noprompt" ]; then echo "" echo "" if [ "$UPDATE_UBOOT" = "0" ]; then echo "You are already running the latest uBoot." else echo "You are already running a modern uBoot." fi echo "Your current uBoot environment should be reasonable. However, if you'r e having" echo "any probems booting, you can reset the environment variables to know go od values." echo -n "Would you like to reset the uBoot environment? [N/y] " read PROMPT if [ "$PROMPT" = "y" -o "$PROMPT" = "Y" ]; then UPDATE_UBOOT_ENVIRONMENT=1 fi fi if [ "$UPDATE_UBOOT_ENVIRONMENT" = "1" ]; then echo "" echo "# Installing uBoot environment" # Preserve the MAC address if [ "$ENV_ETHADDR" = "" ]; then ENV_ETHADDR=`$FW_PRINTENV ethaddr 2> /dev/null | cut -d'=' -f 2-` fi # Preserve the 'rescue_installed' setting ENV_RESCUE_INSTALLED=`$FW_PRINTENV rescue_installed 2> /dev/null | cut -d'=' -f 2-` if [ "$ENV_RESCUE_INSTALLED" = "" ]; then ENV_BOOTCMD_RESCUE=`$FW_PRINTENV bootcmd_rescue 2> /dev/null` if [ "$ENV_BOOTCMD_RESCUE" != "" ]; then ENV_RESCUE_INSTALLED=1 fi fi # Preserve the arcNumber value ENV_ARCNUMBER=`$FW_PRINTENV arcNumber 2> /dev/null | cut -d'=' -f 2-` # Preserve the custom kernel parameters ENV_RESCUE_CUSTOM=`$FW_PRINTENV rescue_custom_params 2> /dev/null | cut -d'=' -f 2-` ENV_USB_CUSTOM=`$FW_PRINTENV usb_custom_params 2> /dev/null | cut -d'=' -f 2- ` ENV_UBIFS_CUSTOM=`$FW_PRINTENV ubifs_custom_params 2> /dev/null | cut -d'=' - f 2-` # Install the uBoot environment download_and_verify "$UBOOT_ENV" "$UBOOT_ENV_URL" if [ "$?" -ne "0" ]; then echo "## Could not install uBoot environment, exiting" exit 1 fi echo "" echo "# Verifying uBoot environment" # Verify the uBoot environment $NANDDUMP --noecc --omitoob -f "/tmp/uboot.environment" -s 0xc0000 -l 0x20000 /dev/mtd0 wget -O "$UBOOT_ENV.md5" "$UBOOT_ENV_URL.md5" verify_md5 "/tmp/uboot.environment" "$UBOOT_ENV.md5" if [ "$?" -ne "0" ]; then rm -f "$UBOOT_ENV.md5" echo "## VERIFICATION FAILED!" echo "## uBoot environment was not properly written to mtd0. Please re-run this installer." exit 1 fi rm -f "$UBOOT_ENV.md5" $FW_SETENV ethaddr $ENV_ETHADDR if [ "$ENV_RESCUE_INSTALLED" = "1" ]; then $FW_SETENV rescue_installed $ENV_R ESCUE_INSTALLED; fi if [ "$ENV_RESCUE_CUSTOM" != "" ]; then $FW_SETENV rescue_custom_params $ENV_ RESCUE_CUSTOM; fi if [ "$ENV_USB_CUSTOM" != "" ]; then $FW_SETENV usb_custom_params $ENV_USB_CU STOM; fi if [ "$ENV_UBIFS_CUSTOM" != "" ]; then $FW_SETENV ubifs_custom_params $ENV_UB IFS_CUSTOM; fi if [ "$ENV_ARCNUMBER" != "" ]; then $FW_SETENV arcNumber $ENV_ARCNUMBER # If there was no arcNumber set, then this is probably a new install. # Set the default arcNumber for the platform # Note: As of 10/24/2010 everything will default to the SHEEVAPLUG arcNumber (2097) # at some point, they should start using the newer dockstar ID (2998) but cur rently the most # common kernels do not support the Dockstar machine ID else $FW_SETENV arcNumber 2097 echo "" echo "" echo "# Setting arcNumber to 2097 (SheevaPlug)" echo "# Note: if you have a kernel that supports your platform, you should use the proper arcNumber." echo "# You can set the correct arcNumber by running the following command: " if [ "$UBOOT_PLATFORM" = "dockstar" ]; then echo $FW_SETENV arcNumber 29 98 elif [ "$UBOOT_PLATFORM" = "goflexhome" ]; then echo $FW_SETENV arcNumber 3 089 elif [ "$UBOOT_PLATFORM" = "goflexnet" ]; then echo $FW_SETENV arcNumber 30 89 elif [ "$UBOOT_PLATFORM" = "pinkpogo" ]; then echo $FW_SETENV arcNumber 29 98 elif [ "$UBOOT_PLATFORM" = "pogov1" ]; then echo $FW_SETENV arcNumber 29 98 fi fi fi echo "" echo "# uBoot installation has completed successfully." Sorry there's a bit of line wrapping there contents of /usr/sbin:- Pogoplug:/usr/sbin$ ls -l -rwxr-xr-x 1 root root 14168 Jan 1 00:54 blparam lrwxrwxrwx 1 root root 17 Nov 4 2009 chpasswd -> ../../bin/busybox lrwxrwxrwx 1 root root 17 Nov 4 2009 chroot -> ../../bin/busybox lrwxrwxrwx 1 root root 17 Nov 4 2009 crond -> ../../bin/busybox -rwxr-xr-x 1 root root 18677 Jun 3 2013 debootstrap lrwxrwxrwx 1 root root 17 Nov 4 2009 dhcprelay -> ../../bin/busybox lrwxrwxrwx 1 root root 17 Nov 4 2009 dnsd -> ../../bin/busybox -rwxr-xr-x 1 root root 242462 Mar 10 2009 dropbear lrwxrwxrwx 1 root root 17 Nov 4 2009 fakeidentd -> ../../bin/busybox lrwxrwxrwx 1 root root 17 Nov 4 2009 fbset -> ../../bin/busybox -rwxr-xr-x 1 root root 12819 Jan 1 00:54 flash_erase -rwxr-xr-x 1 root root 668497 Jan 1 00:54 fw_printenv lrwxrwxrwx 1 root root 21 Jan 1 00:54 fw_setenv -> /usr/sbin/fw_printenv lrwxrwxrwx 1 root root 17 Nov 4 2009 httpd -> ../../bin/busybox lrwxrwxrwx 1 root root 17 Nov 4 2009 inetd -> ../../bin/busybox -rwxr-xr-x 1 root root 21286 Jan 1 00:54 nanddump -rwxr-xr-x 1 root root 11500 Jan 1 00:54 nandwrite lrwxrwxrwx 1 root root 17 Nov 4 2009 rdate -> ../../bin/busybox lrwxrwxrwx 1 root root 17 Nov 4 2009 readprofile -> ../../bin/busybox lrwxrwxrwx 1 root root 17 Nov 4 2009 setlogcons -> ../../bin/busybox lrwxrwxrwx 1 root root 17 Nov 4 2009 telnetd -> ../../bin/busybox lrwxrwxrwx 1 root root 17 Nov 4 2009 udhcpd -> ../../bin/busybox Pogoplug:/usr/sbin$ chmod +x ./debootstrap chmod: ./debootstrap: Read-only file system Pogoplug:/usr/sbin$ cd .. Pogoplug:/usr$ rm -rf sbin/ rm: cannot remove 'sbin/nanddump': Read-only file system rm: cannot remove 'sbin/dnsd': Read-only file system rm: cannot remove 'sbin/nandwrite': Read-only file system rm: cannot remove 'sbin/crond': Read-only file system rm: cannot remove 'sbin/fbset': Read-only file system rm: cannot remove 'sbin/httpd': Read-only file system rm: cannot remove 'sbin/inetd': Read-only file system rm: cannot remove 'sbin/rdate': Read-only file system rm: cannot remove 'sbin/dhcprelay': Read-only file system rm: cannot remove 'sbin/fakeidentd': Read-only file system rm: cannot remove 'sbin/telnetd': Read-only file system rm: cannot remove 'sbin/setlogcons': Read-only file system rm: cannot remove 'sbin/dropbear': Read-only file system rm: cannot remove 'sbin/fw_setenv': Read-only file system rm: cannot remove 'sbin/flash_erase': Read-only file system rm: cannot remove 'sbin/chroot': Read-only file system rm: cannot remove 'sbin/chpasswd': Read-only file system rm: cannot remove 'sbin/debootstrap': Read-only file system rm: cannot remove 'sbin/readprofile': Read-only file system rm: cannot remove 'sbin/udhcpd': Read-only file system rm: cannot remove 'sbin/fw_printenv': Read-only file system rm: cannot remove 'sbin/blparam': Read-only file system rm: cannot remove 'sbin': Read-only file system I'm not sure how to use flash_erase . I'll change the repo to the main debian site, run the uboot installer , then the install script, and if it doesn't play then , it can stay as a webcam server running Arch. I'm not even sure installing squeeze and a distribution upgrade will run properly.. Many thanks for the help Len -- -- Best wishes /73 Richard Bown Email : [email protected] HTTP : http://www.g8jvm.com nil carborundum a illegitemis ################################################################################## Ham Call G8JVM . OS Linux Mint 16 x86_64 on a Dell Inspiron N5030 laptop Maidenhead QRA: IO82SP38, LAT. 52 39.720' N LONG. 2 28.171 W QRV VHF 6mtrs 200W, 4 mtrs 150W, 2mtrs 400W, 70cms 200W Microwave 23 cms 140W, 13 cms 100W, 6 cms 0W & 3cms 5W ################################################################################## -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: https://lists.debian.org/20140519150202.23b32728@richard-laptop
