Hi,
On Thu, Sep 10, 2009 at 06:28:40PM -0500, Tom Judge wrote: > I have the serial console connected at 115200 bps (cu -s115200 > -lttyS0) using a standard serial connector and null modem cable and > never get anything but junk on the console. I suggest that you try with another standard serial connector, until you find a suitable one. Following instructions, it's a standard serial PC cable, but I have had to test three different cables on my SS4000-E to find one suitable enough. With the first two, I only get garbage in minicom, exactly like you describe. Finaly, all was good with the tird. The settings for minicom are 115200 bps, 8N1 (defaults). > Are there any pointers that you can give me to get this install to > work correctly? Once you'll resolve the serial console problem, you can try to install Debian by loading the installer by tftp if the .pkg doesn't work. I've some notes from before and during my installation if you want. A+ -- J.-F. Straeten --- Mutt 1.5.18 - Debian GNU/Linux -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
