On Tue, Mar 04, 2008 at 09:00:34PM +0100, Przemyslaw Kwiatkowski wrote: > md: data-check of RAID array md0 > md: minimum _guaranteed_ speed: 1000 KB/sec/disk. > md: using maximum available idle IO bandwidth (but not more than 200000 > KB/sec) for data-check. > md: using 128k window, over a total of 14651136 blocks. > md: delaying data-check of md1 until md0 has finished (they share one or > more physical units) > md: md0: data-check done. > md: data-check of RAID array md1 > md: minimum _guaranteed_ speed: 1000 KB/sec/disk. > md: using maximum available idle IO bandwidth (but not more than 200000 > KB/sec) for data-check. > md: using 128k window, over a total of 961128704 blocks. > RAID1 conf printout: > --- wd:2 rd:2 > disk 0, wo:0, o:1, dev:sda1 > disk 1, wo:0, o:1, dev:sdb1 > md: md1: data-check done. > RAID1 conf printout: > --- wd:2 rd:2 > disk 0, wo:0, o:1, dev:sda3 > disk 1, wo:0, o:1, dev:sdb3 > drivers/usb/class/usblp.c: usblp0: removed > > Any ideas?
These seem normal messages. What else is going on when the box hangs? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
