Where did You get the old version from? I didn't find any older versions on the cygwin site. It should be a site, that kept a snapshot of the old releases as complete as possible.
Am Freitag, den 21.01.2005, 06:51 -0800 schrieb Waiss, Garrett: > Good luck. I gave up and "downgraded" to cygwin 1.5.10-3. If you are > running any release after that on XP SP2, there is a piping issue that > has not been addressed. > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf > Of Neven Luetic > Sent: Friday, January 21, 2005 2:48 AM > To: cygwin@cygwin.com > Subject: ssh problem on Windows XP > > > Hello, > > I know, problems have been reported concerning the use of ssh on windows > xp ("ssh hangs"). I would just like to confirm, if this is, what I'm > dealing with. And perhaps somebody knows some workaround until there is > a fix. > > I have a cygwin installation on XP at my customers and on W2K at home. > My aim was to make some shellscripts I wrote available to some of the > windows users via a php-interface for administrative tasks on their > linux internet servers. > > I am using ssh with public keys to connect to the linux-servers. > What works: > I can ssh from my linux box to the linux servers. > I can call "system(ssh [EMAIL PROTECTED] command)" from php on > linux. > I can do all this on my W2K box (Vmware), when I start the apache > service as the same user, that has the public key. > However on the XP computers, I can only use ssh from the command line, > calling some script containing ssh via PHP hangs. > > This is the client's errorlog (-vvv): > > OpenSSH_3.9p1, OpenSSL 0.9.7e 25 Oct 2004 > debug2: ssh_connect: needpriv 0 > debug1: Connecting to xxx.xxx.xxx [xxx.xxx.xxx.xxx] port 22. > debug1: Connection established. > debug1: identity file /home/xxx/.ssh/identity type -1 > debug1: identity file /home/xxx/.ssh/id_rsa type -1 > debug3: Not a RSA1 key file /home/xxx/.ssh/id_dsa. > debug2: key_type_from_name: unknown key type '-----BEGIN' > debug3: key_read: missing keytype > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug2: key_type_from_name: unknown key type '-----END' > debug3: key_read: missing keytype > debug1: identity file /home/xxx/.ssh/id_dsa type 2 > debug1: Remote protocol version 2.0, remote software version > OpenSSH_3.4p1 > debug1: match: OpenSSH_3.4p1 pat OpenSSH* > debug1: Enabling compatibility mode for protocol 2.0 > debug1: Local version string SSH-2.0-OpenSSH_3.9p1 > debug2: fd 3 setting O_NONBLOCK > debug1: SSH2_MSG_KEXINIT sent > debug1: SSH2_MSG_KEXINIT received > debug2: kex_parse_kexinit: > diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-he > llman-group1-sha1 > debug2: kex_parse_kexinit: ssh-rsa,ssh-dss > debug2: kex_parse_kexinit: > aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-c > bc,[EMAIL PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr > debug2: kex_parse_kexinit: > aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-c > bc,[EMAIL PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr > debug2: kex_parse_kexinit: > hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-9 > 6,hmac-md5-96 > debug2: kex_parse_kexinit: > hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-9 > 6,hmac-md5-96 > debug2: kex_parse_kexinit: none,zlib > debug2: kex_parse_kexinit: none,zlib > debug2: kex_parse_kexinit: > debug2: kex_parse_kexinit: > debug2: kex_parse_kexinit: first_kex_follows 0 > debug2: kex_parse_kexinit: reserved 0 > debug2: kex_parse_kexinit: > diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1 > debug2: kex_parse_kexinit: ssh-rsa,ssh-dss > debug2: kex_parse_kexinit: > aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-c > bc,[EMAIL PROTECTED] > debug2: kex_parse_kexinit: > aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-c > bc,[EMAIL PROTECTED] > debug2: kex_parse_kexinit: > hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-9 > 6,hmac-md5-96 > debug2: kex_parse_kexinit: > hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-9 > 6,hmac-md5-96 > debug2: kex_parse_kexinit: none,zlib > debug2: kex_parse_kexinit: none,zlib > debug2: kex_parse_kexinit: > debug2: kex_parse_kexinit: > debug2: kex_parse_kexinit: first_kex_follows 0 > debug2: kex_parse_kexinit: reserved 0 > debug2: mac_init: found hmac-md5 > debug1: kex: server->client aes128-cbc hmac-md5 none > debug2: mac_init: found hmac-md5 > debug1: kex: client->server aes128-cbc hmac-md5 none > debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent > debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP > debug2: dh_gen_key: priv key bits set: 140/256 > debug2: bits set: 511/1024 > debug1: SSH2_MSG_KEX_DH_GEX_INIT sent > debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY > debug3: check_host_in_hostfile: filename /home/xxx/.ssh/known_hosts > debug3: check_host_in_hostfile: match line 1 > debug3: check_host_in_hostfile: filename /home/xxx/.ssh/known_hosts > debug3: check_host_in_hostfile: match line 1 > debug1: Host 'xxx.xxx.xxx' is known and matches the RSA host key. > debug1: Found key in /home/xxx/.ssh/known_hosts:1 > debug2: bits set: 536/1024 > debug1: ssh_rsa_verify: signature correct > debug2: kex_derive_keys > debug2: set_newkeys: mode 1 > debug1: SSH2_MSG_NEWKEYS sent > debug1: expecting SSH2_MSG_NEWKEYS > debug2: set_newkeys: mode 0 > debug1: SSH2_MSG_NEWKEYS received > debug1: SSH2_MSG_SERVICE_REQUEST sent > debug2: service_accept: ssh-userauth > debug1: SSH2_MSG_SERVICE_ACCEPT received > debug2: key: /home/xxx/.ssh/identity (0x0) > debug2: key: /home/xxx/.ssh/id_rsa (0x0) > debug2: key: /home/xxx/.ssh/id_dsa (0x100eeb98) > debug1: Authentications that can continue: publickey,password > debug3: start over, passed a different list publickey,password > debug3: preferred publickey,keyboard-interactive,password > debug3: authmethod_lookup publickey > debug3: remaining preferred: keyboard-interactive,password > debug3: authmethod_is_enabled publickey > debug1: Next authentication method: publickey > debug1: Trying private key: /home/xxx/.ssh/identity > debug3: no such identity: /home/xxx/.ssh/identity > debug1: Trying private key: /home/xxx/.ssh/id_rsa > debug3: no such identity: /home/xxx/.ssh/id_rsa > debug1: Offering public key: /home/xxx/.ssh/id_dsa > debug3: send_pubkey_test > debug2: we sent a publickey packet, wait for reply > debug1: Server accepts key: pkalg ssh-dss blen 433 > debug2: input_userauth_pk_ok: fp > a3:d2:0a:dc:22:84:17:37:13:1b:d9:c4:d6:7f:08:73debug3: > sign_and_send_pubkey > debug1: read PEM private key done: type DSA > debug1: Authentication succeeded (publickey). > debug2: fd 4 setting O_NONBLOCK > debug2: fd 5 setting O_NONBLOCK > debug2: fd 6 setting O_NONBLOCK > debug1: channel 0: new [client-session] > debug3: ssh_session2_open: channel_new: 0 > debug2: channel 0: send open > debug1: Entering interactive session. > debug2: callback start > debug2: client_session2_setup: id 0 > debug2: channel 0: request shell confirm 0 > debug2: callback done > debug2: channel 0: open confirm rwindow 0 rmax 32768 > debug2: channel 0: rcvd adjust 131072 > debug2: channel 0: read<=0 rfd 4 len 0 > debug2: channel 0: read failed > debug2: channel 0: close_read > debug2: channel 0: input open -> drain > debug2: channel 0: ibuf empty > debug2: channel 0: send eof > debug2: channel 0: input drain -> closed > debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 > debug2: channel 0: rcvd eof > debug2: channel 0: output open -> drain > debug2: channel 0: rcvd close > debug3: channel 0: will not send data after close > er close > > > > > -- > Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple > Problem reports: http://cygwin.com/problems.html > Documentation: http://cygwin.com/docs.html > FAQ: http://cygwin.com/faq/ > > > -- > Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple > Problem reports: http://cygwin.com/problems.html > Documentation: http://cygwin.com/docs.html > FAQ: http://cygwin.com/faq/ > -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://cygwin.com/docs.html FAQ: http://cygwin.com/faq/
