Data on the drive:
c:\Program Files (x86)\hdparm>hdparm -I /dev/sdb
1 [main] hdparm 25220 find_fast_cwd: WARNING: Couldn't compute
FAST_CWD pointer. Please report this problem to
the public mailing list cygwin@cygwin.com
/dev/sdb:
ATA device, with non-removable media
Model Number: ST8000DM004-2CX188
Serial Number: XXXXXXXXX
Firmware Revision: 0001
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5
Standards:
Used: unknown (minor revision code 0x006d)
Supported: 10 9 8 7 6 5
Likely used: 10
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors:15628053168
device size with M = 1024*1024: 7630885 MBytes
device size with M = 1000*1000: 8001563 MBytes (8001 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = ?
Recommended acoustic management value: 208, current value: 208
DMA: mdma0 mdma1 *mdma2 udma0 udma1 udma2 udma3 udma4 udma5 udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
* WRITE_UNCORRECTABLE command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
unknown 119[6]
* unknown 119[7]
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
* unknown 76[3]
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
* unknown 76[15]
DMA Setup Auto-Activate optimization
Device-initiated interface power management
* Software settings preservation
unknown 78[7]
* SMART Command Transport (SCT) feature set
* SCT LBA Segment Access (AC2)
* SCT Data Tables (AC5)
unknown 206[7]
unknown 206[12]
unknown 206[13]
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
468min for SECURITY ERASE UNIT. 468min for ENHANCED SECURITY ERASE
UNIT.
Checksum: correct
c:\Program Files (x86)\hdparm>
On Fri, Feb 22, 2019 at 11:31 PM <cygwinautore...@sourceware.org> wrote:
> >c:\Program Files (x86)\hdparm>hdparm -Z /dev/sdb
> > 0 [main] hdparm 19868 find_fast_cwd: WARNING: Couldn't compute
> >FAST_CWD pointer. Please report this problem to
> >the public mailing list cygwin@cygwin.com
>
> >/dev/sdb:
> > disabling Seagate auto powersaving mode
> > HDIO_DRIVE_CMD(seagatepwrsave) failed: Input/Output error
>
> >c:\Program Files (x86)\hdparm>
>
>
>
> >--=20
> >James Fowler/=E6=96=B9=E5=BF=97=E5=AE=87
> >santi...@myazcomputerguy.com
> >rootl...@gmail.com
> >Public Key:
> >
> https://sites.google.com/site/poorpermissions/pk/fowler_publickey?attredire=
> >cts=3D0&d=3D1
> ><http://rootless.googlepages.com/fowler_publickey>
>
>
> https://cygwin.com/faq.html#faq.using.fixing-find_fast_cwd-warnings
>
--
James Fowler/方志宇
santi...@myazcomputerguy.com
rootl...@gmail.com
Public Key:
https://sites.google.com/site/poorpermissions/pk/fowler_publickey?attredirects=0&d=1
<http://rootless.googlepages.com/fowler_publickey>
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
