On 11/07/2012 01:02 PM, Bill Hoffman wrote: > Is there a > way to debug this?
The first step is to follow the problem reporting guidelines: http://cygwin.com/problems.html Following them may reveal a conflicting cygwin.dll file or something similar in your full path which is interfering with some git subcommand loading properly. Given that a PATH of just /usr/bin works for you, try appending progressively more segments of your original path until the problem reproduces. Once you find a PATH that reliably fails, remove the last added segment as a suspect and continue adding the remaining segments from the original PATH until you are left with a good PATH and a list of suspects. Then go back to the PATH of /usr/bin and append each suspect individually and test again to see if the suspects are the problem alone. Since its also possible that you may be encountering some PATH length limit here, it may also be worthwhile to report the output of the following command: echo "$PATH" | wc -c Good luck! -Jeremy -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
