2010/7/4 Václav Haisman: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA256 > > Alex Leigh wrote, On 4.7.2010 9:20: >> On Sun, Jul 4, 2010 at 1:07 AM, Larry Hall (Cygwin) wrote: >>> On 7/4/2010 1:01 AM, Alex Leigh wrote: >>>> >>>> Hi, >>>> >>>> I've been getting some STATUS_ACCESS_VIOLATION errors when running >>>> bash and some xwin programs, and after some searching I'm trying to >>>> run rebaseall to see if that would fix the problem. However, when >>>> running rebaseall from ash, I get the following error: "ReBaseImage >>>> (/usr/bin/cygcrypt-0.dll) failed with last error = 6". Searching >>>> around it seems error code 6 comes from the DLL being in use. However >>>> I made sure to close all running cygwin programs, and I went through >>>> each of my running programs to see if any of them loads that >>>> particular DLL, which none of them do. Could there be anything else >>>> that would cause rebaseall to fail on that particular DLL? Thanks. >>>> I've attached an output from cygcheck. >>> >>> Make sure you stopped all services and then reboot. >> >> I rebooted, then shut down all non-essential programs and services, >> and still get the same error. This is baffling...is there anything >> else that could cause this error? > Download the Process Explorer and find out who is holding the file open.
Process Explorer is what I used and I made sure absolutely nothing is holding that file open. Alex -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
