Shouldn't that have been: mount -s -b -c /
User mounts override system mounts. You'll also need to do (after the above mount): umount -u -c Then exit/reenter the shell and all should be kosher. David Monk wrote: >Some of what you asked is in the cygcheck output, but here it is: (note, >changing the cygdrive prefix, by mount -c / made no difference) > >dmonk@DIETPEPSI ~ >$ mount >C:\cygwin\bin on /usr/bin type user (binmode) >C:\cygwin\lib on /usr/lib type user (binmode) >C:\cygwin on / type user (binmode) >c: on /cygdrive/c type user (binmode,noumount) >h: on /cygdrive/h type user (binmode,noumount) > >dmonk@DIETPEPSI ~ >$ mount -p >Prefix Type Flags >/cygdrive user binmode > >dmonk@DIETPEPSI ~ >$ mount -c / > >dmonk@DIETPEPSI ~ >$ mount -p >Prefix Type Flags >/cygdrive user binmode >/ system binmode > >dmonk@DIETPEPSI ~ >$ /usr/sbin/sshd -d -d -d >debug1: sshd version OpenSSH_3.4p1 >Could not load host key: /etc/ssh_host_key >Could not load host key: /etc/ssh_host_rsa_key >Could not load host key: /etc/ssh_host_dsa_key >Disabling protocol version 1. Could not load host key >Disabling protocol version 2. Could not load host key >sshd: no hostkeys available -- exiting. > >This is a pretty much default installation of cygwin, installed yesterday. I >did add a few packages, such as bzip2, ncftp, openssh, vim and wget, maybe a >few others. But, otherwise, this is a default installation with >ssh-host-config run to setup openssh as a service. > >David > >----- Original Message ----- >From: "Harig, Mark A." <[EMAIL PROTECTED]> >To: "David Monk" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> >Sent: Thursday, October 10, 2002 11:41 AM >Subject: RE: sshd problems > > >What are your mount points? > > $ mount > >What is your cygdrive prefix? > > $ mount -p > >If your cygdrive prefix is not '/', then consider changing it to '/': > > $ mount -c / > > > >>-----Original Message----- >>From: David Monk [mailto:[EMAIL PROTECTED]] >>Sent: Thursday, October 10, 2002 10:29 AM >>To: [EMAIL PROTECTED] >>Subject: sshd problems >> >> >>Hello all, >> >>I hate to start yet another thread on this, but I am just >>joining the list. >>I see there have been many varied reports of problems with >>sshd recently. I >>just wanted to throw in my experience to hopefully give some >>additional >>insight. >>I have been running cygwin with sshd as a Win2k service for >>nearly a year on >>this machine. I upgraded to openssh-3.4p1 using privlege >>separation without >>any noticed errors or problems when it became available. I can not say >>exactly what circumstances brought about my problems, but I >>noticed it about >>two weeks ago. I fought with it the day after I discovered >>the service was >>no longer running. I tried upgrading my packages. I tried >>reconfiguring ssh >>via ssh-host-config. I ignored it for a few days as I had >>other work related >>issues to deal with. I began futzing with it again two days >>ago. No joy. >>Tried reinstalling cygwin, by just moving c:\cygwin and >>installing again. >>Yesterday, I set out to remove any and all references to >>cygwin from my >>system, in the registry and filesystem, to do an absolutely >>fresh install. I >>noticed an odd thing. A c:\var directory, with a log subdir >>and a sshd.log >>file. How on earth did that get outside c:\cygwin?? Anyway, I removed >>everything, including that. I rebooted to ensure everything >>was sane. I >>setup the needed environment variable CYGWIN as "ntsec glob >>tty notitle", >>which is what I had been using for the past year. I made a >>new c:\cygwin >>dir, removed all inheritability settings, for receiving and >>propogating >>permissions. I then did a completely fresh install. Once >>everything was >>installed, I rebooted, just to be safe. I then opened up bash and ran >>ssh-host-config, checked the permissions and ownership of >>/etc/ssh* and >>/var/empty, and ensured the sshd user had been created. Then >>I tried the >>service. No joy. I get the now common, I'm sure, error: >>$ cygrunsrv -S sshd >>cygrunsrv: Error starting a service: QueryServiceStatus: >>Win32 error 1062: >>The service has not been started. >> >>I get nothing in /var/log/sshd.log I now also noticed I have >>c:\var\log\sshd.log again, but it is as well empty. When I >>try to run sshd >>in debug, I get this: >>$ /usr/sbin/sshd -d -d -d >>debug1: sshd version OpenSSH_3.4p1 >>Could not load host key: /etc/ssh_host_key >>Could not load host key: /etc/ssh_host_rsa_key >>Could not load host key: /etc/ssh_host_dsa_key >>Disabling protocol version 1. Could not load host key >>Disabling protocol version 2. Could not load host key >>sshd: no hostkeys available -- exiting. >> >>Seeing as how it somehow creates as c:\var\log\sshd.log, I >>decided to try a >>little something. I created a c:\etc: >>$ mkdir /cygdrive/c/etc >>I then decided to copy the key files there, and I get this >>weird problem: >>$ cp ssh_host_key ssh_host_key.pub ssh_host_dsa_key >>ssh_host_dsa_key.pub >>ssh_host_rsa_key ssh_host_rsa_key.pub /cygdrive/c/etc/ >>cp: `ssh_host_key.exe' and `/cygdrive/c/etc/ssh_host_key' are >>the same file >>cp: `ssh_host_dsa_key.exe' and >>`/cygdrive/c/etc/ssh_host_dsa_key' are the >>same file >>cp: `ssh_host_rsa_key.exe' and >>`/cygdrive/c/etc/ssh_host_rsa_key' are the >>same file >> >>I have no clue where the .exe came from on those source file >>listings, but >>it most certainly did not copy the keys. It did copy the .pub >>files though. >>Of course, I am sure this is due to the permissions, since >>system owns them. >>So, I changed the owner to myself, copied the files and >>changed the owner >>back. >>Anyway, this didn't do any good either as /usr/sbin/sshd -d >>-d -d gives the >>same problems as before, but I am guessing that something has to have >>changed in the packaging of openssh or within the cygwin1.dll so that >>openssh is not properly respecting the cygwin paths. >> >>I hope this can somehow help track down this issue as I rely >>heavily on my >>workstations ssh server for my remote after hours work that I do. >>Pasting the output of cygcheck -svr below. >> >>--- >>David Monk CCNA, MCSE >>[EMAIL PROTECTED] >> >> >>Cygwin Win95/NT Configuration Diagnostics >>Current System Time: Thu Oct 10 09:21:44 2002 >> >>Windows 2000 Professional Ver 5.0 Build 2195 Service Pack 3 >> >>Path: C:\cygwin\usr\local\bin >> C:\cygwin\bin >> C:\cygwin\bin >> C:\cygwin\bin >> C:\cygwin\usr\local\bin >> c:\WINNT\system32 >> c:\WINNT >> c:\WINNT\System32\Wbem >> c:\MSSQL7\BINN >> >>SysDir: C:\WINNT\System32 >>WinDir: C:\WINNT >> >>CYGWIN = `ntsec ntea glob tty notitle' >>HOME = `C:\cygwin\home\dmonk' >>MAKE_MODE = `unix' >>PWD = `/home/dmonk' >>USER = `dmonk' >> >>ALLUSERSPROFILE = `C:\Documents and Settings\All Users' >>APPDATA = `C:\Documents and Settings\dmonk\Application Data' >>COMMONPROGRAMFILES = `C:\Program Files\Common Files' >>COMPUTERNAME = `DIETPEPSI' >>COMSPEC = `C:\WINNT\system32\cmd.exe' >>HOMEDRIVE = `C:' >>HOMEPATH = `\' >>LOGONSERVER = `\\JIMI' >>MANPATH = `:/usr/ssl/man' >>NUMBER_OF_PROCESSORS = `1' >>OLDPWD = `/cygdrive/c/etc' >>OS2LIBPATH = `C:\WINNT\system32\os2\dll;' >>PATHEXT = `.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH' >>PROCESSOR_ARCHITECTURE = `x86' >>PROCESSOR_IDENTIFIER = `x86 Family 6 Model 8 Stepping 3, GenuineIntel' >>PROCESSOR_LEVEL = `6' >>PROCESSOR_REVISION = `0803' >>PROGRAMFILES = `C:\Program Files' >>PROMPT = `$P$G' >>PS1 = `\[\033]0;\w\007 >>\033[32m\]\u@\h \[\033[33m\w\033[0m\] >>$ ' >>SHLVL = `1' >>SYSTEMDRIVE = `C:' >>SYSTEMROOT = `C:\WINNT' >>TEMP = `c:\DOCUME~1\dmonk\LOCALS~1\Temp' >>TERM = `cygwin' >>TMP = `c:\DOCUME~1\dmonk\LOCALS~1\Temp' >>USERDOMAIN = `CJDS_MEM' >>USERNAME = `dmonk' >>USERPROFILE = `C:\Documents and Settings\dmonk' >>WINDIR = `C:\WINNT' >>_ = `/usr/bin/cygcheck' >> >>HKEY_CURRENT_USER\Software\Cygnus Solutions >>HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin >>HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2 >> (default) = `/cygdrive' >> cygdrive flags = 0x00000022 >>HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/ >> (default) = `C:\cygwin' >> flags = 0x00000002 >>HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/usr/bin >> (default) = `C:\cygwin/bin' >> flags = 0x00000002 >>HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/usr/lib >> (default) = `C:\cygwin/lib' >> flags = 0x00000002 >>HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\Program Options >>HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions >>HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin >>HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2 >>HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\Program Options >> >>a: fd N/A N/A >>c: hd NTFS 6459Mb 54% CP CS UN PA FC >>d: cd N/A N/A >>h: hd NTFS 6482Mb 11% CP CS UN PA FC >> >>C:\cygwin / user binmode >>C:\cygwin/bin /usr/bin user binmode >>C:\cygwin/lib /usr/lib user binmode >>. /cygdrive user binmode,cygdrive >> >>Found: C:\cygwin\bin\bash.exe >>Found: C:\cygwin\bin\cat.exe >>Not Found: cpp (good!) >>Found: C:\cygwin\bin\find.exe >>Not Found: gcc >>Not Found: gdb >>Not Found: ld >>Found: C:\cygwin\bin\ls.exe >>Not Found: make >>Found: C:\cygwin\bin\sh.exe >> >> 58k 2002/05/07 C:\cygwin\bin\cygbz2-1.dll - os=4.0 img=1.0 sys=4.0 >> "cygbz2-1.dll" v0.0 ts=2002/5/7 1:33 >> 625k 2002/08/09 C:\cygwin\bin\cygcrypto.dll - os=4.0 img=1.0 sys=4.0 >> "cygcrypto.dll" v0.0 ts=2002/8/9 15:20 >> 45k 2001/04/25 C:\cygwin\bin\cygform5.dll - os=4.0 img=1.0 sys=4.0 >> "cygform5.dll" v0.0 ts=2001/4/25 0:28 >> 35k 2002/01/09 C:\cygwin\bin\cygform6.dll - os=4.0 img=1.0 sys=4.0 >> "cygform6.dll" v0.0 ts=2002/1/9 0:03 >> 19k 2002/02/20 C:\cygwin\bin\cyggdbm.dll - os=4.0 img=1.0 sys=4.0 >> "cyggdbm.dll" v0.0 ts=2002/2/19 21:05 >> 17k 2001/06/28 C:\cygwin\bin\cyghistory4.dll - os=4.0 >>img=1.0 sys=4.0 >> "cyghistory4.dll" v0.0 ts=2001/1/6 22:34 >> 20k 2002/07/17 C:\cygwin\bin\cyghistory5.dll - os=4.0 >>img=1.0 sys=4.0 >> "cyghistory5.dll" v0.0 ts=2002/7/17 16:18 >> 929k 2002/06/24 C:\cygwin\bin\cygiconv-2.dll - os=4.0 >>img=1.0 sys=4.0 >> "cygiconv-2.dll" v0.0 ts=2002/6/24 13:24 >> 22k 2001/12/13 C:\cygwin\bin\cygintl-1.dll - os=4.0 img=1.0 sys=4.0 >> "cygintl-1.dll" v0.0 ts=2001/12/13 3:28 >> 28k 2002/09/20 C:\cygwin\bin\cygintl-2.dll - os=4.0 img=1.0 sys=4.0 >> "cygintl-2.dll" v0.0 ts=2002/9/19 22:13 >> 26k 2001/04/25 C:\cygwin\bin\cygmenu5.dll - os=4.0 img=1.0 sys=4.0 >> "cygmenu5.dll" v0.0 ts=2001/4/25 0:27 >> 20k 2002/01/09 C:\cygwin\bin\cygmenu6.dll - os=4.0 img=1.0 sys=4.0 >> "cygmenu6.dll" v0.0 ts=2002/1/9 0:03 >> 156k 2001/04/25 C:\cygwin\bin\cygncurses++5.dll - os=4.0 >>img=1.0 sys=4.0 >> "cygncurses++5.dll" v0.0 ts=2001/4/25 0:29 >> 175k 2002/01/09 C:\cygwin\bin\cygncurses++6.dll - os=4.0 >>img=1.0 sys=4.0 >> "cygncurses++6.dll" v0.0 ts=2002/1/9 0:03 >> 226k 2001/04/25 C:\cygwin\bin\cygncurses5.dll - os=4.0 >>img=1.0 sys=4.0 >> "cygncurses5.dll" v0.0 ts=2001/4/25 0:17 >> 202k 2002/01/09 C:\cygwin\bin\cygncurses6.dll - os=4.0 >>img=1.0 sys=4.0 >> "cygncurses6.dll" v0.0 ts=2002/1/9 0:03 >> 15k 2001/04/25 C:\cygwin\bin\cygpanel5.dll - os=4.0 img=1.0 sys=4.0 >> "cygpanel5.dll" v0.0 ts=2001/4/25 0:27 >> 12k 2002/01/09 C:\cygwin\bin\cygpanel6.dll - os=4.0 img=1.0 sys=4.0 >> "cygpanel6.dll" v0.0 ts=2002/1/9 0:03 >> 40k 2001/11/21 C:\cygwin\bin\cygpcre.dll - os=4.0 img=1.0 sys=4.0 >> "cygpcre.dll" v0.0 ts=2001/11/21 16:15 >> 39k 2001/11/21 C:\cygwin\bin\cygpcreposix.dll - os=4.0 >>img=1.0 sys=4.0 >> "cygpcreposix.dll" v0.0 ts=2001/11/21 16:15 >> 22k 2002/06/09 C:\cygwin\bin\cygpopt-0.dll - os=4.0 img=1.0 sys=4.0 >> "cygpopt-0.dll" v0.0 ts=2002/6/9 0:45 >> 108k 2001/06/28 C:\cygwin\bin\cygreadline4.dll - os=4.0 >>img=1.0 sys=4.0 >> "cygreadline4.dll" v0.0 ts=2001/1/6 22:34 >> 127k 2002/07/17 C:\cygwin\bin\cygreadline5.dll - os=4.0 >>img=1.0 sys=4.0 >> "cygreadline5.dll" v0.0 ts=2002/7/17 16:18 >> 159k 2002/08/09 C:\cygwin\bin\cygssl.dll - os=4.0 img=1.0 sys=4.0 >> "cygssl.dll" v0.0 ts=2002/8/9 15:20 >> 50k 2002/03/12 C:\cygwin\bin\cygz.dll - os=4.0 img=1.0 sys=4.0 >> "cygz.dll" v0.0 ts=2002/3/11 22:38 >> 883k 2002/07/06 C:\cygwin\bin\cygwin1.dll - os=4.0 img=1.0 sys=4.0 >> "cygwin1.dll" v0.0 ts=2002/7/6 1:16 >> Cygwin DLL version info: >> DLL version: 1.3.12 >> DLL epoch: 19 >> DLL bad signal mask: 19005 >> DLL old termios: 5 >> DLL malloc env: 28 >> API major: 0 >> API minor: 54 >> Shared data: 3 >> DLL identifier: cygwin1 >> Mount registry: 2 >> Cygnus registry name: Cygnus Solutions >> Cygwin registry name: Cygwin >> Program options name: Program Options >> Cygwin mount registry name: mounts v2 >> Cygdrive flags: cygdrive flags >> Cygdrive prefix: cygdrive prefix >> Cygdrive default prefix: >> Build date: Sat Jul 6 02:16:58 EDT 2002 >> CVS tag: cygwin-1-3-12-1 >> Shared id: cygwin1S3 >> >> >>Cygwin Package Information >>Last downloaded files to: @ >>Last downloaded files from: @ >> >>Package Version >>_update-info-dir 00069-1 >>ash 20020731-1 >>base-files 1.0-1 >>base-passwd 1.0-1 >>bash 2.05b-5 >>bzip2 1.0.2-2 >>cygrunsrv 0.95-1 >>cygutils 1.1.2-1 >>cygwin 1.3.12-4 >>diff 1.0-1 >>diffutils 2.8.1-1 >>fileutils 4.1-1 >>findutils 4.1.7-4 >>gawk 3.1.1-3 >>gdbm 1.8.0-4 >>grep 2.5-1 >>groff 1.17.2-1 >>gzip 1.3.3-4 >>less 374-1 >>libbz2_1 1.0.2-2 >>libiconv2 1.8-2 >>libintl1 0.10.40-1 >>libintl2 0.11.5-1 >>libncurses5 5.2-1 >>libncurses6 5.2-8 >>libpopt0 1.6.4-4 >>libreadline4 4.1-2 >>libreadline5 4.3-1 >>login 1.4-4 >>man 1.5g-2 >>ncftp 3.1.4-1 >>ncurses 5.2-8 >>openssh 3.4p1-5 >>openssl 0.9.6g-1 >>pcre 3.7-1 >>readline 4.3-1 >>sed 3.02-1 >>sh-utils 2.0-2 >>tar 1.13.19-1 >>termcap 20020930-1 >>terminfo 5.2-3 >>texinfo 4.2-3 >>textutils 2.0.21-1 >>vim 6.1-2 >>wget 1.8.2-1 >>which 1.5-1 >>whois 4.5.17-1 >>zlib 1.1.4-1 >> >> >>-- >>Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple >>Bug reporting: http://cygwin.com/bugs.html >>Documentation: http://cygwin.com/docs.html >>FAQ: http://cygwin.com/faq/ >> >> >> >> > > > >-- >Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple >Bug reporting: http://cygwin.com/bugs.html >Documentation: http://cygwin.com/docs.html >FAQ: http://cygwin.com/faq/ > > > > -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Bug reporting: http://cygwin.com/bugs.html Documentation: http://cygwin.com/docs.html FAQ: http://cygwin.com/faq/
