On Fri, Feb 17, 2017 at 12:03 AM, giuseppe.ferrigni--- via coreboot < [email protected]> wrote:
> Hi, > > I'm trying to flash corboot on a IPC-FP4-DP G Series. The system has the > following components (from CPU-Z software tool): > > CPU: AMD GX-224IJ - 00670F00 - Prairie Falcon (Family 15h Model 70h - > Stoney Ridge) > MOTHERBOARD: Gardenia CRB > CHIPSET: AMD K15IMC > SOUTHBRIDGE: Carrizo FCH > LPCIO: Fintek F81803 > > It seems that the actual coreboot release is compatible with each > component, so I configured it as in the attached file. > Obviously, nothing is so simple. After flashing, nothing on video, nothing > on COM port. > I have now some simple questions: > - is my configuration correct? > - how can I start debugging, since I have no feedback? > - Can I test the boot process of the rom in some way using qemu? > - How can I know if the COM ports are connected to the APU or to the > superIO? Which is the right configuration in the first case and in the > second one? > I would check twice the PSP firmware files you have embedded in your image. Unfortunately I cannot give you any SHA sums of correct files to have, but I would assume 3rdparty/blobs has working ones. There is board-status output of a tested configuration for amd/gardenia here: https://www.coreboot.org/Supported_Motherboards#amd.2Fgardenia Kyösti
-- coreboot mailing list: [email protected] https://www.coreboot.org/mailman/listinfo/coreboot
