Hi there,
except some error messages comming from the eth0 network card (indeed in
most cases, this is the checked interface), if I understand correctly, you
managed to get an IP: 9.165.172.28 and to ping it correctly. What about
the routes ? do you manage to use alright this network ?
about the dhcpd initscript:
The /etc/init.d/dhcpd script detects eth0 so you should replace eth0 in
that script with tr0 in your case in order to setup your dhcp server
listening to that interface.
are my assumptions correct ?
I'm asking this because I cannot test this in here.
and, one last question: are you using the dhcp*3*pl11 package from the
contrib (you mentionned something about that) or dhcp-2*, the stable
version, from cooker/main ? (some people have tested both and they seem to
have prb with dhcp-3* but it works ok with dhcp-2*).
Thanks for your answer
--
Florin http://www.linux-mandrake.com
>[EMAIL PROTECTED] (Udo Weber) writes:
> Florin Grad wrote:
>
> > Hi there,
> >
> > anyone managed to install/use the dhcp-3* packages with a token ring
> > network ?
> > --
> > Florin http://www.linux-mandrake.com
>
> Hi Florin,
> maybe you can remember on my discussion about dhcp and TR a few weeks
> ago.
> I just tryed the dhcp-3* from contrib now and here my experiences:
>
> from init:
>
> Bringing up interface eth0: cardmgr[3217]: + Determining
> IP information for tr0 via dhclient...Internet Software
> Consortium DHCP Client V3.0b2pl11
> cardmgr[3217]: + All rights reserved.
> cardmgr[3217]: +
> tr0: Initial interrupt : 16 Mbps, shared RAM base 000d4000.
> tr0: Opend adapter: Xmit bfrs: 2 X 2048, Rcv bfrs: 16 X 1032
> tr0: Adapter initialized and opened.
> tr0: Setting functional address: 00 00 00 00
> tr0: Setting functional address: 00 00 00 00
>
> from syslog:
>
> Dec 6 11:42:36 mumpel network: Setting network parameters: succeeded
> Dec 6 11:42:36 mumpel cardmgr[3217]: initializing socket 0 <30>Dec
> 6 11:42:36 cardmgr[3217]: socket 0: IBM Token Ring Adapter
> Dec 6 11:42:36 mumpel cardmgr[3217]: executing: './network start tr0'
> Dec 6 11:42:36 mumpel ifup: SIOCADDRT: Network is unreachable
> Dec 6 11:42:36 mumpel network: Bringing up interface lo: succeeded
> Dec 6 11:42:36 mumpel dhclient: Internet Software Consortium DHCP
> Client V3.0b2
> pl11
> Dec 6 11:42:36 mumpel cardmgr[3217]: + Copyright 1995-2000 Internet
> Software Co
> nsortium.
> Dec 6 11:42:36 mumpel dhclient: All rights reserved.
> Dec 6 11:42:36 mumpel cardmgr[3217]: + For info, please visit
> http://www.isc.or
> g/products/DHCP
> Dec 6 11:42:36 mumpel dhclient:
> Dec 6 11:42:36 mumpel modprobe: modprobe: Can't locate module
> Dec 6 11:42:40 mumpel ifup: Delaying eth0 initialization.
> Dec 6 11:42:40 mumpel network: Bringing up interface eth0: failed
> Dec 6 11:42:41 mumpel modprobe: modprobe: Can't locate module
> Dec 6 11:42:41 mumpel cardmgr[3217]: + Listening on
> LPF/tr0/00:20:35:c0:da:1d
> Dec 6 11:42:41 mumpel dhclient: Sending on LPF/tr0/00:20:35:c0:da:1d
> Dec 6 11:42:41 mumpel cardmgr[3217]: + Sending on Socket/fallback
> Dec 6 11:42:41 mumpel dhclient: DHCPREQUEST on tr0 to 255.255.255.255
> port 67
> Dec 6 11:42:41 mumpel cardmgr[3217]: + DHCPACK from 9.165.160.2
> Dec 6 11:42:41 mumpel dhclient: bound to 9.165.172.28 -- renewal in
> 34050 secon
> ds.
> Dec 6 11:42:41 mumpel cardmgr[3217]: + done.
> Dec 6 11:42:43 mumpel portmap: portmap startup succeeded
>
> [root@mumpel /root]# ifconfig
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:3924 Metric:1
> RX packets:112 errors:0 dropped:0 overruns:0 frame:0
> TX packets:112 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> tr0 Link encap:16/4 Mbps Token Ring HWaddr 00:20:35:C0:DA:1D
> inet addr:9.165.172.28 Bcast:9.165.175.255
> Mask:255.255.240.0
> UP BROADCAST RUNNING MULTICAST MTU:2000 Metric:1
> RX packets:665 errors:0 dropped:0 overruns:0 frame:0
> TX packets:63 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:100
> Interrupt:9 Base address:0xa20 Memory:d4000-d7fff
>
> [root@mumpel /root]# ping 9.165.172.28
> PING 9.165.172.28 (9.165.172.28): 56 octets data
> 64 octets from 9.165.172.28: icmp_seq=0 ttl=255 time=0.2 ms
> 64 octets from 9.165.172.28: icmp_seq=1 ttl=255 time=0.0 ms
> 64 octets from 9.165.172.28: icmp_seq=2 ttl=255 time=0.0 ms
>
> --- 9.165.172.28 ping statistics ---
> 3 packets transmitted, 3 packets received, 0% packet loss
> round-trip min/avg/max = 0.0/0.0/0.2 ms
> [root@mumpel /root]# ping 9.165.160.93
> PING 9.165.160.93 (9.165.160.93): 56 octets data
>
> --- 9.165.160.93 ping statistics ---
> 35 packets transmitted, 0 packets received, 100% packet loss
>
> ***********************************************************
> Always the old already discussed problem with dhcp.
> Result: I go back to pump, this works without problems (currently).
> ***********************************************************
>
> Udo
