From: "Christopher De Long" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Subject: [cooker] No modem
Date sent: Tue, 18 Jan 2000 21:50:07 -0500
Send reply to: [EMAIL PROTECTED]
> Ok I installed MD 7.0 on my primary machine.... install was fine...
>
>
> I set up the PPP connection.
>
> Alas Lothar doesn't like my modem.
>
> NOPE it isn't a winmodem
>
> USR Sportster v.90
>
> Anyway around this.. I tried ALL the other com port settings
> I got everything from modem busy to modem locked
>
> any hints?
>
>
> take care
>
> chris
>
>
>
If you are using kppp It would not work if the volume setting was
set to high in settings.
Turn on the log and look what the modem is being sent.
On mine it was sending an ATL4 which the modem did not like.
I set the volume setting in kppp to the middle and it works fine.
Just something to try.
I have a USR v.90 modem with both USB and serial(using serial of
course).
Hope this helps
P.S. Also check to see what /dev/modem is pointing to. It may be
sending to the wrong com port. I think kppp has a debug or
terminal button under the modem tab that will bring up a term
program connected to the modem. Hit <enter> a few times and try
typeing AT and see if the modem responds with OK ... if not you
are probabally not on the correct com port.
James
James Ray Kenney - Regional Systems Specialist 2
Texas Department of Human Services
285 Liberty St. 10th Floor - Regional Technology Unit
Beaumont, TX 77701
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: 2.6.2
mQCNAzDGh+IAAAEEALtoCTrqvHd8tCifWK8hXwqdZuvbWOZOPo8RWKUm697HLOMr
T5yfr40LaoZpCgec/ErcPJlOoZ3Ok1d5J8K/xrl8U7t+mNag00VMpmz/AfRhsPnQ
+iVcTvtcw+opIoO++Ei4LiY/99H+5raPnTe7icucTkYKdxyAqJT7hiQSTfy1AAUR
tCJKYW1lcyBSYXkgS2VubmV5IDxqa2VubmV5QHNhdC5uZXQ+iQCVAwUQMPYvf5T7
hiQSTfy1AQEY6QQAhHGkbKDE7rGaQ5t/KdgeobCmIv6UWT/YKr1n49Tjl8P8Ntr1
16BWocObvAWESiunutYHqiy7She5ncP3PlOs39VuBdw6Nr9ehu6tblufOyiHeZN6
T6qJUwWpDXqDJDf1ecS+2QgVWsx7Qt4b6TyB1C0zMTtq2/encVHWOQ5PU70=
=TcJB
-----END PGP PUBLIC KEY BLOCK-----
