Author: alg
Date: Thu Apr 10 15:08:57 2014
New Revision: 1586329
URL: http://svn.apache.org/r1586329
Log:
in-between results/corrections/improvemnts
Removed:
openoffice/branches/alg/aw080/main/drawinglayer/source/processor2d/vclhelperbitmaprender.cxx
Modified:
openoffice/branches/alg/aw080/main/sd/source/ui/func/fudraw.cxx
openoffice/branches/alg/aw080/main/sd/source/ui/view/drviews7.cxx
openoffice/branches/alg/aw080/main/svx/inc/svx/svdlegacy.hxx
openoffice/branches/alg/aw080/main/svx/source/svdraw/svdedtv1.cxx
openoffice/branches/alg/aw080/main/svx/source/svdraw/svdlegacy.cxx
openoffice/branches/alg/aw080/main/svx/source/svdraw/svdmrkv.cxx
openoffice/branches/alg/aw080/main/svx/source/svdraw/svdograf.cxx
openoffice/branches/alg/aw080/main/svx/source/svdraw/svdopath.cxx
openoffice/branches/alg/aw080/main/xmloff/source/draw/ximpshap.cxx
Modified: openoffice/branches/alg/aw080/main/sd/source/ui/func/fudraw.cxx
URL:
http://svn.apache.org/viewvc/openoffice/branches/alg/aw080/main/sd/source/ui/func/fudraw.cxx?rev=1586329&r1=1586328&r2=1586329&view=diff
==============================================================================
--- openoffice/branches/alg/aw080/main/sd/source/ui/func/fudraw.cxx (original)
+++ openoffice/branches/alg/aw080/main/sd/source/ui/func/fudraw.cxx Thu Apr 10
15:08:57 2014
@@ -457,7 +457,7 @@ bool FuDraw::KeyInput(const KeyEvent& rK
if(!mpView->MarkNextObj( !aCode.IsShift() ))
{
//If there is only one object, don't do
the UnmarkAlllObj() & MarkNextObj().
- if (
mpView->getSelectedSdrObjectCount() > 1 )
+ if ( mpView->areSdrObjectsSelected() &&
mpView->GetMarkableObjCount() > 1 )
{
// #97016# No next object: go
over open end and
// get first from the other side
Modified: openoffice/branches/alg/aw080/main/sd/source/ui/view/drviews7.cxx
URL:
http://svn.apache.org/viewvc/openoffice/branches/alg/aw080/main/sd/source/ui/view/drviews7.cxx?rev=1586329&r1=1586328&r2=1586329&view=diff
==============================================================================
--- openoffice/branches/alg/aw080/main/sd/source/ui/view/drviews7.cxx (original)
+++ openoffice/branches/alg/aw080/main/sd/source/ui/view/drviews7.cxx Thu Apr
10 15:08:57 2014
@@ -19,10 +19,9 @@
*
*************************************************************/
-
-
// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_sd.hxx"
+
#include <com/sun/star/lang/XMultiServiceFactory.hpp>
#include <com/sun/star/lang/Locale.hpp>
#include <com/sun/star/linguistic2/XThesaurus.hpp>
@@ -46,8 +45,6 @@
#include <editeng/unolingu.hxx>
#include <svx/extrusionbar.hxx>
#include <svx/fontworkbar.hxx>
-
-// #UndoRedo#
#include <svl/slstitm.hxx>
#include <sfx2/app.hxx>
#include <svtools/insdlg.hxx>
@@ -55,18 +52,17 @@
#include <svl/languageoptions.hxx>
#include <comphelper/processfactory.hxx>
#include <sfx2/request.hxx>
-
-
+#include <svx/svdoole2.hxx>
#include <svx/pfiledlg.hxx>
#include <svx/grafctrl.hxx>
#include <svtools/cliplistener.hxx>
#include <sfx2/viewfrm.hxx>
+#include <svx/svdotable.hxx>
#include "app.hrc"
#include "glob.hrc"
#include "res_bmp.hrc"
#include "PresentationViewShell.hxx"
-
#include "misc.hxx"
#include "Outliner.hxx"
#include "drawdoc.hxx"
@@ -1411,141 +1407,126 @@ void DrawViewShell::GetMenuState( SfxIte
}
else
{
- // get selection
- const SdrObjectVector
aSelection(mpDrawView->getSelectedSdrObjectVectorFromSdrMarkView());
- bool bFoundBitmap(false);
- bool bFoundMetafile(false);
- bool bFoundObjNoLine(false);
- bool bFoundObjNoArea(false);
- bool bFoundNoGraphicObj(false);
- bool bFoundAny(false);
- bool bFoundTable(false);
-
- for(sal_uInt32 i(0); i < aSelection.size() && !bFoundAny; i++)
- {
- SdrObject* pObj = aSelection[i];
- const sal_uInt16 nId(pObj->GetObjIdentifier());
- const sal_uInt32 nInv(pObj->GetObjInventor());
+ // get selection
+ const SdrObjectVector
aSelection(mpDrawView->getSelectedSdrObjectVectorFromSdrMarkView());
+ bool bFoundBitmap(false);
+ bool bFoundMetafile(false);
+ bool bFoundObjNoLine(false);
+ bool bFoundObjNoArea(false);
+ bool bFoundNoGraphicObj(false);
+ bool bFoundAny(false);
+ bool bFoundTable(false);
- if(nInv == SdrInventor)
- {
- // 2D objects
- switch( nId )
- {
- case OBJ_POLY:
- {
- SdrPathObj* pSdrPathObj = dynamic_cast< SdrPathObj*
>(pObj);
+ for(sal_uInt32 i(0); i < aSelection.size() && !bFoundAny; i++)
+ {
+ SdrObject* pObj = aSelection[i];
- if(pSdrPathObj)
- {
- switch(pSdrPathObj->getSdrPathObjType())
- {
- case PathType_Line:
- case PathType_OpenPolygon:
- case PathType_OpenBezier:
- {
- bFoundObjNoArea =
true;
- bFoundNoGraphicObj
= true;
- break;
- }
- default:
- break;
- }
- }
- else
- {
- OSL_ENSURE(false, "OOps, SdrObjKind and
dynamic_cast do not fit (!)");
- }
- break;
+ if(pObj)
+ {
+ if(dynamic_cast< SdrPathObj* >(pObj) || dynamic_cast<
SdrCircObj* >(pObj) || dynamic_cast< SdrEdgeObj* >(pObj))
+ {
+ // OBJ_POLY, OBJ_CIRC and OBJ_EDGE; decision depends on
closed or not (fill possible)
+ if(pObj->IsClosedObj())
+ {
+ bFoundObjNoArea = true;
+ bFoundNoGraphicObj = true;
}
- case OBJ_CIRC:
+ else
{
- SdrCircObj* pSdrCircObj = dynamic_cast< SdrCircObj*
>(pObj);
+ bFoundAny = true;
+ break;
+ }
+ }
+ else if(dynamic_cast< SdrOle2Obj* >(pObj))
+ {
+ // OBJ_OLE2 #i118485# #i118525# Allow Line, Area and
Graphic (Metafile, Bitmap)
+ bSingleGraphicSelected = (1 == aSelection.size());
+ bFoundBitmap = true;
+ bFoundMetafile = true;
+ }
+ else if(dynamic_cast< SdrGrafObj* >(pObj))
+ {
+ // OBJ_GRAF
+ bSingleGraphicSelected = (1 == aSelection.size());
- if(pSdrCircObj)
+ switch(static_cast< const SdrGrafObj*
>(pObj)->GetGraphicType())
+ {
+ case GRAPHIC_BITMAP:
{
- if(CircleType_Arc ==
pSdrCircObj->GetSdrCircleObjType())
+ bFoundBitmap = true;
+
+ if(static_cast< const SdrGrafObj*
>(pObj)->isEmbeddedSvg())
{
- bFoundObjNoArea = true;
- bFoundNoGraphicObj =
true;
+ bFoundMetafile = true;
}
+ break;
}
- else
+ case GRAPHIC_GDIMETAFILE:
{
- OSL_ENSURE(false, "OOps, SdrObjKind and
dynamic_cast do not fit (!)");
+ bFoundMetafile = true;
+ break;
+ }
+ default:
+ {
+ break;
}
- break;
}
- case OBJ_EDGE:
- bFoundObjNoArea = true;
- bFoundNoGraphicObj = true;
- break;
- case OBJ_OLE2 :
- // #i118485# #i118525# Allow
Line, Area and Graphic (Metafile, Bitmap)
- bSingleGraphicSelected = (1 ==
aSelection.size());
- bFoundBitmap = true;
- bFoundMetafile = true;
- break;
- case OBJ_GRAF :
- {
- bSingleGraphicSelected = (1 ==
aSelection.size());
- const SdrGrafObj* pSdrGrafObj = static_cast< const
SdrGrafObj* >(pObj);
-
switch(pSdrGrafObj->GetGraphicType())
- {
- case GRAPHIC_BITMAP :
- bFoundBitmap =
true;
- if(pSdrGrafObj->isEmbeddedSvg())
- {
- bFoundMetafile = true;
- }
- break;
- case
GRAPHIC_GDIMETAFILE :
- bFoundMetafile
= true;
- break;
- default:
- break;
- }
+ }
+ else if(dynamic_cast< sdr::table::SdrTableObj* >(pObj))
+ {
+ // OBJ_TABLE
+ bFoundTable = true;
+ }
+ else
+ {
+ // everything else (including 3D objects)
+ bFoundAny = true;
+ }
+ }
+ else
+ {
+ OSL_ENSURE(false, "SdrObject selection with empty SdrObjects
is not allowed (!)");
+ }
+ }
- break;
- }
- case OBJ_TABLE:
- bFoundTable = true;
- break;
- default :
- bFoundAny = true;
- }
- }
- else if(nInv == E3dInventor)
- {
- // 3D objects
- bFoundAny = true;
- }
- }
+ if(bFoundTable)
+ {
+ rSet.DisableItem(SID_ATTRIBUTES_LINE);
+ }
- if( bFoundTable )
- rSet.DisableItem( SID_ATTRIBUTES_LINE );
+ if(!bFoundAny)
+ {
+ // Disable menuitem for area-dialog
+ if(bFoundObjNoArea)
+ {
+ // #i25616#
+ rSet.DisableItem(SID_ATTRIBUTES_AREA);
+ }
- if (!bFoundAny)
- {
- // Disable menuitem for area-dialog
- if( bFoundObjNoArea ) // #i25616#
- rSet.DisableItem( SID_ATTRIBUTES_AREA );
-
- // Disable menuitem for line-dialog
- if( bFoundObjNoLine )
- rSet.DisableItem( SID_ATTRIBUTES_LINE );
-
- if( bFoundBitmap && !bFoundMetafile &&
!bFoundNoGraphicObj ) // only Bitmaps marked
- rSet.DisableItem( SID_CONVERT_TO_BITMAP );
- else if( !bFoundBitmap && bFoundMetafile &&
!bFoundNoGraphicObj ) // only Metafiles marked
- rSet.DisableItem( SID_CONVERT_TO_METAFILE );
- else if( !bFoundBitmap && !bFoundMetafile &&
!bFoundNoGraphicObj ) // nothing to do
- {
- rSet.DisableItem( SID_CONVERT_TO_BITMAP );
- rSet.DisableItem( SID_CONVERT_TO_METAFILE );
- }
- }
- }
+ // Disable menuitem for line-dialog
+ if(bFoundObjNoLine)
+ {
+ rSet.DisableItem(SID_ATTRIBUTES_LINE);
+ }
+
+ if(bFoundBitmap && !bFoundMetafile && !bFoundNoGraphicObj)
+ {
+ // only Bitmaps marked
+ rSet.DisableItem(SID_CONVERT_TO_BITMAP);
+ }
+ else if(!bFoundBitmap && bFoundMetafile && !bFoundNoGraphicObj)
+ {
+ // only Metafiles marked
+ rSet.DisableItem(SID_CONVERT_TO_METAFILE);
+ }
+ else if(!bFoundBitmap && !bFoundMetafile && !bFoundNoGraphicObj)
+ {
+ // nothing to do
+ rSet.DisableItem(SID_CONVERT_TO_BITMAP);
+ rSet.DisableItem(SID_CONVERT_TO_METAFILE);
+ }
+ }
+ }
if( !bSingleGraphicSelected )
{
Modified: openoffice/branches/alg/aw080/main/svx/inc/svx/svdlegacy.hxx
URL:
http://svn.apache.org/viewvc/openoffice/branches/alg/aw080/main/svx/inc/svx/svdlegacy.hxx?rev=1586329&r1=1586328&r2=1586329&view=diff
==============================================================================
--- openoffice/branches/alg/aw080/main/svx/inc/svx/svdlegacy.hxx (original)
+++ openoffice/branches/alg/aw080/main/svx/inc/svx/svdlegacy.hxx Thu Apr 10
15:08:57 2014
@@ -59,9 +59,22 @@ namespace sdr
// old access to anchor as point
SVX_DLLPUBLIC Point GetAnchorPos(const SdrObject& rObject);
+ // back and forth converters for Rotation new (angle in rad [0.0 ..
F_2PI[) and
+ // old (mirrored angle in deg * 100 [0 .. 36000[)
+ // These converters are used for places where the correct new values
are used
+ // for the UI and similar
+ long convertRotateAngleNewToLegacy(double fNew);
+ double convertRotateAngleLegacyToNew(long nOld);
+
+ // back and forth converters for ShearX new (shear x in rad [-F_PI ..
F_PI[) and
+ // old (mirrored shear x in deg * 100 [-18000 .. 18000[)
+ // These converters are used for places where the correct new values
are used
+ // for the UI and similar
+ long convertShearAngleXNewToLegacy(double fNew);
+ double convertShearAngleXLegacyToNew(long nOld);
+
// old access to rotate and shear (including wrong orientation
and
- // integer nature). bool bVertical removed and method renamed,
- // was not supported anyways
+ // integer nature, see above converters)
SVX_DLLPUBLIC long GetRotateAngle(const SdrObject& rObject);
SVX_DLLPUBLIC long GetShearAngleX(const SdrObject& rObject);
Modified: openoffice/branches/alg/aw080/main/svx/source/svdraw/svdedtv1.cxx
URL:
http://svn.apache.org/viewvc/openoffice/branches/alg/aw080/main/svx/source/svdraw/svdedtv1.cxx?rev=1586329&r1=1586328&r2=1586329&view=diff
==============================================================================
--- openoffice/branches/alg/aw080/main/svx/source/svdraw/svdedtv1.cxx (original)
+++ openoffice/branches/alg/aw080/main/svx/source/svdraw/svdedtv1.cxx Thu Apr
10 15:08:57 2014
@@ -268,36 +268,22 @@ void SdrEditView::ResizeMarkedObj(const
double SdrEditView::GetMarkedObjRotate() const
{
- if(!areSdrObjectsSelected())
- {
- return 0.0;
- }
-
- SdrObject* pSingle = getSelectedIfSingle();
-
- if(pSingle)
- {
- return pSingle->getSdrObjectRotate();
- }
-
- const SdrObjectVector
aSelection(getSelectedSdrObjectVectorFromSdrMarkView());
+ SdrObject* pCandidate = getSelectedIfSingle();
- if(aSelection.size())
+ if(!pCandidate)
{
- SdrObject* pObject = aSelection[0];
+ // for multiselection use the rotation angle of the 1st object
+ const SdrObjectVector
aSelection(getSelectedSdrObjectVectorFromSdrMarkView());
- if(pObject)
- {
- return pObject->getSdrObjectRotate();
- }
- else
+ if(aSelection.size())
{
- OSL_ENSURE(false, "OOps, areSdrObjectsSelected() == true, but no
first object (!)");
+ pCandidate = aSelection[0];
}
}
- else
+
+ if(pCandidate)
{
- OSL_ENSURE(false, "OOps, areSdrObjectsSelected() == true, but no
objects (!)");
+ return pCandidate->getSdrObjectRotate();
}
return 0.0;
@@ -496,36 +482,30 @@ void SdrEditView::MirrorMarkedObjVertica
double SdrEditView::GetMarkedObjShearX() const
{
- double fRetval(0.0);
-
- if(areSdrObjectsSelected())
- {
- const SdrObjectVector
aSelection(getSelectedSdrObjectVectorFromSdrMarkView());
+ SdrObject* pCandidate = getSelectedIfSingle();
- for(sal_uInt32 a(0); a < aSelection.size(); a++)
- {
- SdrObject* pObject = aSelection[a];
+ if(!pCandidate)
+ {
+ // for multiselection use the shear value of the 1st object
+ const SdrObjectVector
aSelection(getSelectedSdrObjectVectorFromSdrMarkView());
- if(a)
- {
- const double
fNew(pObject->getSdrObjectShearX());
+ if(aSelection.size())
+ {
+ pCandidate = aSelection[0];
+ }
+ }
- if(!basegfx::fTools::equal(fNew, fRetval))
- {
- return 0.0;
- }
- }
- else
- {
- fRetval = pObject->getSdrObjectShearX();
- }
- }
+ if(pCandidate)
+ {
+ OSL_ENSURE(
+ basegfx::fTools::less(atan(pCandidate->getSdrObjectShearX()),
F_PI2 * (89.0/90.0)) &&
+ basegfx::fTools::more(atan(pCandidate->getSdrObjectShearX()),
-F_PI2 * (89.0/90.0)),
+ "Shear angle is out of bounds (inside the one degree extrema
corresponding to a +/- 90 degree range)");
- const double fMaxShearRange(F_PI2 * (89.0/90.0));
- fRetval = basegfx::clamp(fRetval, -fMaxShearRange,
fMaxShearRange);
- }
+ return pCandidate->getSdrObjectShearX();
+ }
- return fRetval;
+ return 0.0;
}
void SdrEditView::ShearMarkedObj(const basegfx::B2DPoint& rRefPoint, double
fAngle, bool bVShear, bool bCopy)
@@ -961,24 +941,24 @@ void SdrEditView::SetNotPersistAttrToMar
if
(rAttr.GetItemState(SDRATTR_ROTATEALL,true,&pPoolItem)==SFX_ITEM_SET)
{
- const sal_Int32 nAngle(((const
SdrAngleItem*)pPoolItem)->GetValue());
- const double fNewAngle((((36000 - nAngle) % 36000) *
F_PI) / 18000.0);
+ const sal_Int32 nAngle(((const
SdrAngleItem*)pPoolItem)->GetValue());
+ const double
fNewAngle(sdr::legacy::convertRotateAngleLegacyToNew(nAngle));
RotateMarkedObj(rAllSnapRange.getCenter(), fNewAngle);
}
if
(rAttr.GetItemState(SDRATTR_HORZSHEARALL,true,&pPoolItem)==SFX_ITEM_SET)
{
- const sal_Int32 nAngle(((const
SdrAngleItem*)pPoolItem)->GetValue());
- const double fAngle(tan(((36000 - nAngle) * F_PI) /
18000.0));
+ const sal_Int32 nAngle(((const
SdrAngleItem*)pPoolItem)->GetValue());
+ const double
fAngle(sdr::legacy::convertShearAngleXLegacyToNew(nAngle));
ShearMarkedObj(rAllSnapRange.getCenter(), fAngle,
false);
}
if
(rAttr.GetItemState(SDRATTR_VERTSHEARALL,true,&pPoolItem)==SFX_ITEM_SET)
{
- const sal_Int32 nAngle(((const
SdrAngleItem*)pPoolItem)->GetValue());
- const double fAngle(tan(((36000 - nAngle) * F_PI) /
18000.0));
+ const sal_Int32 nAngle(((const
SdrAngleItem*)pPoolItem)->GetValue());
+ const double
fAngle(sdr::legacy::convertShearAngleXLegacyToNew(nAngle));
ShearMarkedObj(rAllSnapRange.getCenter(), fAngle, true);
}
@@ -1705,9 +1685,13 @@ SfxItemSet SdrEditView::GetGeoAttrFromMa
fRotateRefX = aRotateAxe.getX();
fRotateRefY = aRotateAxe.getY();
}
-
+
+ // get rotation of selection. fAllRotation is in radians [0.0 .. F_2PI[
const double fAllRotation(GetMarkedObjRotate());
- const sal_Int32 nOldAllRot((basegfx::fround(((F_2PI -
fAllRotation) * 18000.0) / F_PI)) % 36000);
+
+ // convert to old notation used in the UI; it's orientation is
mirrored and its
+ // degrees * 100 in integer
+ const sal_Int32
nOldAllRot(sdr::legacy::convertRotateAngleNewToLegacy(fAllRotation));
aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_ANGLE,nOldAllRot));
aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_ROT_X,basegfx::fround(fRotateRefX)));
@@ -1724,15 +1708,15 @@ SfxItemSet SdrEditView::GetGeoAttrFromMa
fShearRefY = aRotateAxe.getY();
}
- double fAllShearX(GetMarkedObjShearX());
- const double fMaxShearRange(F_PI2 * (89.0/90.0));
+ // get shear of selection. GetMarkedObjShearX is the tan of the shear
angle in radians
+ // tan(]-F_PI2 .. F_PI2[), so apply atan to get the shear angle
+ const double fAllShearAngleX(atan(GetMarkedObjShearX()));
+
+ // convert to old notation used in the UI; it's orientation is
mirrored and its
+ // degrees * 100 in integer
+ const sal_Int32
nOldAllShearAngleX(sdr::legacy::convertShearAngleXNewToLegacy(fAllShearAngleX));
- fAllShearX = basegfx::snapToRange(fAllShearX, -F_PI, F_PI);
- fAllShearX = basegfx::clamp(fAllShearX, -fMaxShearRange,
fMaxShearRange);
-
- const sal_Int32 nOldAllShearX(basegfx::fround(((-fAllShearX) *
18000.0) / F_PI));
-
-
aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_SHEAR,nOldAllShearX));
+
aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_SHEAR,nOldAllShearAngleX));
aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_SHEAR_X,basegfx::fround(fShearRefX)));
aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_SHEAR_Y,basegfx::fround(fShearRefY)));
@@ -1936,13 +1920,16 @@ void SdrEditView::SetGeoAttrToMarked(con
}
// rotation change?
- const double fOldRotateAngle(GetMarkedObjRotate());
+ const double fOldRotateAngle(GetMarkedObjRotate()); // radians [0.0 ..
F_2PI[
double fNewRotateAngle(fOldRotateAngle);
if
(SFX_ITEM_SET==rAttr.GetItemState(SID_ATTR_TRANSFORM_ANGLE,true,&pPoolItem))
{
- const sal_Int32 nAllRot(((const
SfxInt32Item*)pPoolItem)->GetValue());
- fNewRotateAngle = (((36000 - nAllRot) % 36000) * F_PI) /
18000.0;
+ const sal_Int32 nAllRot(((const SfxInt32Item*)pPoolItem)->GetValue());
+
+ // convert from old UI units (angle in degree * 100, wrong oriented)
+ // to correctly orinented radians, same coordinate system as
fOldRotateAngle
+ fNewRotateAngle = sdr::legacy::convertRotateAngleLegacyToNew(nAllRot);
}
const bool bRotate(!basegfx::fTools::equal(fOldRotateAngle,
fNewRotateAngle));
@@ -1960,24 +1947,36 @@ void SdrEditView::SetGeoAttrToMarked(con
}
// shear change?
- double fShearAngle(0.0);
+ double fShearChange(0.0);
basegfx::B2DPoint aShearOffset(0.0, 0.0);
- bool bShearVert(false);
- bool bShear(false);
+ bool bDoShearY(false);
+ bool bDoShearDelta(false);
if(SFX_ITEM_SET ==
rAttr.GetItemState(SID_ATTR_TRANSFORM_SHEAR,true,&pPoolItem))
{
- const sal_Int32 nAllShear(((const
SfxInt32Item*)pPoolItem)->GetValue());
- const double fMaxShearRange(F_PI2 * (89.0/90.0));
- double fNewShearAngle(((-nAllShear) * F_PI) / 18000.0);
-
- fNewShearAngle = basegfx::snapToRange(fNewShearAngle, -F_PI,
F_PI);
- fNewShearAngle = basegfx::clamp(fNewShearAngle,
-fMaxShearRange, fMaxShearRange);
+ // get UI shear angle ]-9000 .. 9000[
+ const sal_Int32 nAllShear(((const
SfxInt32Item*)pPoolItem)->GetValue());
- bShearVert = ((const
SfxBoolItem&)rAttr.Get(SID_ATTR_TRANSFORM_SHEAR_VERTICAL)).GetValue();
- double fOldShearAngle(GetMarkedObjShearX());
+ // convert to correctly oriented shear angle in radians ]-F_PI2 ..
F_PI2[
+ // limit to partial values (corresponding to +-89 degree)
+ // convert from shear angle to shear value used in the transformation
to
+ // get to the same coordinate system as fOldShearValue below will use
+ const double fMaxShearRange(F_PI2 * (89.0/90.0));
+ const double fNewShearValue(
+ tan(
+ basegfx::clamp(
+ sdr::legacy::convertShearAngleXLegacyToNew(nAllShear),
+ -fMaxShearRange,
+ fMaxShearRange)));
+
+ // check if we have a ShearY
+ bDoShearY = ((const
SfxBoolItem&)rAttr.Get(SID_ATTR_TRANSFORM_SHEAR_VERTICAL)).GetValue();
+
+ // get current shear value. It is the tan of the shear angle in radians
+ // tan(]-F_PI .. F_PI[)
+ double fOldShearValue(GetMarkedObjShearX());
- if(bShearVert)
+ if(bDoShearY)
{
// Currently only ShearX is directly used at the
SdrObject since the homogen
// matrix only has six degrees of freedom and it has to
be decided which one
@@ -1985,16 +1984,18 @@ void SdrEditView::SetGeoAttrToMarked(con
// the same as a 90 degree rotation, a ShearY(-x) and a
-90 degree back-rotation.
// Exactly this will be used below. It also shows that
the ShearY is -ShearX, thus
// the compare value can be detected
- fOldShearAngle = -fOldShearAngle;
+ fOldShearValue = -fOldShearValue;
}
- if(!basegfx::fTools::equal(fNewShearAngle, fOldShearAngle))
+ if(!basegfx::fTools::equal(fNewShearValue, fOldShearValue))
{
- fShearAngle = fNewShearAngle - fOldShearAngle;
- bShear = true;
+ // create shear diff and convert to shear angle, this is what
ShearMarkedObj
+ // expects
+ fShearChange = atan(fNewShearValue - fOldShearValue);
+ bDoShearDelta = true;
}
- if(bShear)
+ if(bDoShearDelta)
{
aShearOffset.setX(((const
SfxInt32Item&)rAttr.Get(SID_ATTR_TRANSFORM_SHEAR_X)).GetValue());
aShearOffset.setY(((const
SfxInt32Item&)rAttr.Get(SID_ATTR_TRANSFORM_SHEAR_Y)).GetValue());
@@ -2062,20 +2063,20 @@ void SdrEditView::SetGeoAttrToMarked(con
}
// change shear
- if(bShear && mbShearAllowed)
+ if(bDoShearDelta && mbShearAllowed)
{
basegfx::B2DPoint aRef(aShearOffset + aPageOrigin);
- if(bShearVert)
+ if(bDoShearY)
{
- // see explanation at setting bShearVert
+ // see explanation at setting bDoShearY above
RotateMarkedObj(aRef, F_PI2);
- ShearMarkedObj(aRef, -fShearAngle, true);
+ ShearMarkedObj(aRef, -fShearChange, true);
RotateMarkedObj(aRef, -F_PI2);
}
else
{
- ShearMarkedObj(aRef, fShearAngle, false);
+ ShearMarkedObj(aRef, fShearChange, false);
}
}
Modified: openoffice/branches/alg/aw080/main/svx/source/svdraw/svdlegacy.cxx
URL:
http://svn.apache.org/viewvc/openoffice/branches/alg/aw080/main/svx/source/svdraw/svdlegacy.cxx?rev=1586329&r1=1586328&r2=1586329&view=diff
==============================================================================
--- openoffice/branches/alg/aw080/main/svx/source/svdraw/svdlegacy.cxx
(original)
+++ openoffice/branches/alg/aw080/main/svx/source/svdraw/svdlegacy.cxx Thu Apr
10 15:08:57 2014
@@ -285,14 +285,21 @@ namespace sdr
return Point(basegfx::fround(rAnchor.getX()),
basegfx::fround(rAnchor.getY()));
}
+ long convertRotateAngleNewToLegacy(double fNew)
+ {
+ return basegfx::fround(basegfx::snapToZeroRange(-fNew / F_PI18000,
36000.0));
+ }
+
+ double convertRotateAngleLegacyToNew(long nOld)
+ {
+ return basegfx::snapToZeroRange(static_cast< double >(nOld) *
-F_PI18000, F_2PI);
+ }
+
long GetRotateAngle(const SdrObject& rObject)
{
if(rObject.isRotated())
{
- const double
fRotate(rObject.getSdrObjectRotate());
- const double fSnapped(basegfx::snapToZeroRange(-fRotate /
F_PI18000, 36000.0));
-
- return basegfx::fround(fSnapped);
+ return
convertRotateAngleNewToLegacy(rObject.getSdrObjectRotate());
}
else
{
@@ -300,24 +307,21 @@ namespace sdr
}
}
+ long convertShearAngleXNewToLegacy(double fNew)
+ {
+ return basegfx::fround(basegfx::snapToRange(-fNew / F_PI18000,
-18000.0, 18000.0));
+ }
+
+ double convertShearAngleXLegacyToNew(long nOld)
+ {
+ return basegfx::snapToRange(static_cast< double >(nOld) *
-F_PI18000, -F_PI, F_PI);
+ }
+
long GetShearAngleX(const SdrObject& rObject)
{
if(rObject.isSheared())
{
- const double
fShearX(rObject.getSdrObjectShearX());
- long nRetval(basegfx::fround(-atan(fShearX) /
F_PI18000));
-
- while(nRetval < -18000)
- {
- nRetval += 36000;
- }
-
- while(nRetval >= 18000)
- {
- nRetval -= 36000;
- }
-
- return nRetval;
+ return
convertShearAngleXNewToLegacy(rObject.getSdrObjectShearX());
}
else
{
Modified: openoffice/branches/alg/aw080/main/svx/source/svdraw/svdmrkv.cxx
URL:
http://svn.apache.org/viewvc/openoffice/branches/alg/aw080/main/svx/source/svdraw/svdmrkv.cxx?rev=1586329&r1=1586328&r2=1586329&view=diff
==============================================================================
--- openoffice/branches/alg/aw080/main/svx/source/svdraw/svdmrkv.cxx (original)
+++ openoffice/branches/alg/aw080/main/svx/source/svdraw/svdmrkv.cxx Thu Apr 10
15:08:57 2014
@@ -530,33 +530,79 @@ void SdrMarkView::BrkMarkGluePoints()
bool SdrMarkView::HasMarkableObj() const
{
- const sal_uInt32 nCount(GetMarkableObjCount());
+ SdrPageView* pPV = GetSdrPageView();
- return (0 != nCount);
+ if(pPV)
+ {
+ SdrObjList* pOL = pPV->GetCurrentObjectList();
+
+ if(pOL)
+ {
+ SdrObjectVector aObjects(pOL->getSdrObjectVector());
+
+ for(sal_uInt32 a(0); a < aObjects.size(); a++)
+ {
+ SdrObject* pCandidate = aObjects[a];
+
+ if(pCandidate)
+ {
+ if(IsObjMarkable(*pCandidate))
+ {
+ return true;
+ }
+ }
+ else
+ {
+ OSL_ENSURE(false, "SdrObjectVector with empty entries
(!)");
+ }
+ }
+ }
+ else
+ {
+ OSL_ENSURE(false, "Unexpected missing SdrObjList (!)");
+ }
+ }
+
+ return false;
}
sal_uInt32 SdrMarkView::GetMarkableObjCount() const
{
- sal_uInt32 nCount(0);
- SdrPageView* pPV = GetSdrPageView();
+ sal_uInt32 nCount(0);
+ SdrPageView* pPV = GetSdrPageView();
- if(pPV)
- {
- SdrObjList* pOL = pPV->GetCurrentObjectList();
- sal_uInt32 nObjAnz = pOL->GetObjCount();
+ if(pPV)
+ {
+ SdrObjList* pOL = pPV->GetCurrentObjectList();
- for(sal_uInt32 nObjNum(0); nObjNum < nObjAnz && !nCount;
nObjNum++)
- {
- SdrObject* pObj=pOL->GetObj(nObjNum);
+ if(pOL)
+ {
+ SdrObjectVector aObjects(pOL->getSdrObjectVector());
- if(IsObjMarkable(*pObj))
- {
- nCount++;
- }
- }
- }
+ for(sal_uInt32 a(0); a < aObjects.size(); a++)
+ {
+ SdrObject* pCandidate = aObjects[a];
+
+ if(pCandidate)
+ {
+ if(IsObjMarkable(*pCandidate))
+ {
+ nCount++;
+ }
+ }
+ else
+ {
+ OSL_ENSURE(false, "SdrObjectVector with empty entries
(!)");
+ }
+ }
+ }
+ else
+ {
+ OSL_ENSURE(false, "Unexpected missing SdrObjList (!)");
+ }
+ }
- return nCount;
+ return nCount;
}
bool SdrMarkView::ImpIsFrameHandles() const
Modified: openoffice/branches/alg/aw080/main/svx/source/svdraw/svdograf.cxx
URL:
http://svn.apache.org/viewvc/openoffice/branches/alg/aw080/main/svx/source/svdraw/svdograf.cxx?rev=1586329&r1=1586328&r2=1586329&view=diff
==============================================================================
--- openoffice/branches/alg/aw080/main/svx/source/svdraw/svdograf.cxx (original)
+++ openoffice/branches/alg/aw080/main/svx/source/svdraw/svdograf.cxx Thu Apr
10 15:08:57 2014
@@ -792,7 +792,7 @@ void SdrGrafObj::TakeObjInfo(SdrObjTrans
rInfo.mbShearAllowed = true;
rInfo.mbEdgeRadiusAllowed=false;
- rInfo.mbCanConvToPath = false;
+ rInfo.mbCanConvToPath = !IsEPS();
rInfo.mbCanConvToPathLineToArea = false;
rInfo.mbCanConvToPolyLineToArea = false;
rInfo.mbCanConvToPoly = !IsEPS();
Modified: openoffice/branches/alg/aw080/main/svx/source/svdraw/svdopath.cxx
URL:
http://svn.apache.org/viewvc/openoffice/branches/alg/aw080/main/svx/source/svdraw/svdopath.cxx?rev=1586329&r1=1586328&r2=1586329&view=diff
==============================================================================
--- openoffice/branches/alg/aw080/main/svx/source/svdraw/svdopath.cxx (original)
+++ openoffice/branches/alg/aw080/main/svx/source/svdraw/svdopath.cxx Thu Apr
10 15:08:57 2014
@@ -1637,7 +1637,7 @@ void SdrPathObj::impSetPathPolyPolygonWi
// the SdrPathObj has two basic states, line and other. Line is for two
points
// and no bezier, it uses a specialized geometry (unified line from 0.0,
to 1.0)
// and a specialized transformation which shows the rotation of the line
what is
- // wanted.
+ // wanted. Shear is not preserved due to lines having no shear.
// When a third point is added that mode is left and the regular one
entered, in
// this conversion when using the code below keeping the rotation of the
former
// line object. This is not wrong and works as intended, but is irritating
for the
@@ -1750,6 +1750,9 @@ void SdrPathObj::impSetPathPolyPolygonWi
else
{
// use translate and scale straightforward from new geometry
+ // when either no mirror, scale and shear or object was a line
+ // before and reset is wanted (see explanation for
+ // bResetCoordinateSystemAfterWasLine above)
maSdrObjectTransformation.setB2DHomMatrix(
basegfx::tools::createScaleTranslateB2DHomMatrix(
aRangeNewGeometry.getRange(),
@@ -2726,11 +2729,26 @@ void SdrPathObj::setSdrObjectTransformat
if(isLine())
{
// apply new transformation to (0,0) and (1,0) to create the
polygon data
+ // and set as new geometry
+ const basegfx::B2DPoint aPointA(rTransformation *
basegfx::B2DPoint(0.0, 0.0));
+ const basegfx::B2DPoint aPointB(rTransformation *
basegfx::B2DPoint(1.0, 0.0));
basegfx::B2DPolygon aLine;
- aLine.append(rTransformation * basegfx::B2DPoint(0.0, 0.0));
- aLine.append(rTransformation * basegfx::B2DPoint(1.0, 0.0));
+ aLine.append(aPointA);
+ aLine.append(aPointB);
maPathPolyPolygon = basegfx::B2DPolyPolygon(aLine);
+
+ // the geometry is a non-curved line, create unit transformation
so that (0,0) is
+ // 1st point and (1,0) is 2nd point and call the parent method
with the new
+ // transformation. This is needed to trigger all the refresh stuff
+ const basegfx::B2DVector aDelta(aPointB - aPointA);
+
+ // call parent with new, adapted transformation
+ SdrTextObj::setSdrObjectTransformation(
+ basegfx::tools::createScaleRotateTranslateB2DHomMatrix(
+ basegfx::B2DTuple(aDelta.getLength(), 1.0),
+ atan2(aDelta.getY(), aDelta.getX()),
+ aPointA));
}
else
{
@@ -2740,14 +2758,18 @@ void SdrPathObj::setSdrObjectTransformat
// take out old and apply new transformation
basegfx::B2DHomMatrix
aCombined(maSdrObjectTransformation.getB2DHomMatrix());
+ // apply minimal scaling before inverting to secure inversion
and
+ // to handle cases where polygons have no width and/or height,
but are not a line
+ aCombined = basegfx::tools::guaranteeMinimalScaling(aCombined);
+
aCombined.invert();
aCombined = rTransformation * aCombined;
maPathPolyPolygon.transform(aCombined);
}
- }
- // call parent
- SdrTextObj::setSdrObjectTransformation(rTransformation);
+ // call parent
+ SdrTextObj::setSdrObjectTransformation(rTransformation);
+ }
}
}
Modified: openoffice/branches/alg/aw080/main/xmloff/source/draw/ximpshap.cxx
URL:
http://svn.apache.org/viewvc/openoffice/branches/alg/aw080/main/xmloff/source/draw/ximpshap.cxx?rev=1586329&r1=1586328&r2=1586329&view=diff
==============================================================================
--- openoffice/branches/alg/aw080/main/xmloff/source/draw/ximpshap.cxx
(original)
+++ openoffice/branches/alg/aw080/main/xmloff/source/draw/ximpshap.cxx Thu Apr
10 15:08:57 2014
@@ -1390,6 +1390,8 @@ SdXMLPolygonShapeContext::~SdXMLPolygonS
void SdXMLPolygonShapeContext::StartElement(const uno::Reference<
xml::sax::XAttributeList>& xAttrList)
{
// Add, set Style and properties from base shape
+ // The type is no longer relevant for having a closed or open shape;
instead use an opened or
+ // closed polygon (see below)
if(mbClosed)
AddShape("com.sun.star.drawing.PolyPolygonShape");
else
@@ -1423,6 +1425,13 @@ void SdXMLPolygonShapeContext::StartElem
{
if(aPolygon.count())
{
+ // dependent from the ObjectType in the ODF file set
the closed state
+ // of the Polygon. That state is not part of the
draw:points definition
+ // which was imported in importFromSvgPoints, but
depends on the object type
+ // imported (e.g. draw:polyline or draw:polygon) which
is reflected in the
+ // member variable mbClosed
+ aPolygon.setClosed(mbClosed);
+
const basegfx::B2DRange aSourceRange(
aViewBox.GetX(), aViewBox.GetY(),
aViewBox.GetX() + aViewBox.GetWidth(),
aViewBox.GetY() + aViewBox.GetHeight());
