This is an automated email from the ASF dual-hosted git repository.
janc pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/mynewt-core.git
The following commit(s) were added to refs/heads/master by this push:
new 3657f7e77 hw/bsp/arduino-zero: route default UART to debugger, add
UART1
3657f7e77 is described below
commit 3657f7e77884b7e0fd1b5eb0c5b5143f78bd081f
Author: Wiktor Kwiatkowski <[email protected]>
AuthorDate: Tue Jul 29 09:48:11 2025 +0200
hw/bsp/arduino-zero: route default UART to debugger, add UART1
The default UART used for logging (console_printf) is now routed
through the debugger interface instead of external TX/RX pins, making
serial output easier to access via USB cable.
Additionally, UART1 has been configured and exposed on external
pins for user applications.
---
hw/bsp/arduino_zero/pkg.yml | 4 +++
hw/bsp/arduino_zero/src/hal_bsp.c | 53 ++++++++++++++++++++++++++-------------
hw/bsp/arduino_zero/syscfg.yml | 3 +++
3 files changed, 43 insertions(+), 17 deletions(-)
diff --git a/hw/bsp/arduino_zero/pkg.yml b/hw/bsp/arduino_zero/pkg.yml
index d518cc239..6a91b1b18 100644
--- a/hw/bsp/arduino_zero/pkg.yml
+++ b/hw/bsp/arduino_zero/pkg.yml
@@ -29,5 +29,9 @@ pkg.deps.UART_0:
- "@apache-mynewt-core/hw/drivers/uart"
- "@apache-mynewt-core/hw/drivers/uart/uart_hal"
+pkg.deps.UART_1:
+ - "@apache-mynewt-core/hw/drivers/uart"
+ - "@apache-mynewt-core/hw/drivers/uart/uart_hal"
+
pkg.cflags:
- -D__SAMD21G18A__
diff --git a/hw/bsp/arduino_zero/src/hal_bsp.c
b/hw/bsp/arduino_zero/src/hal_bsp.c
index 06b9fe602..30db63dff 100644
--- a/hw/bsp/arduino_zero/src/hal_bsp.c
+++ b/hw/bsp/arduino_zero/src/hal_bsp.c
@@ -46,12 +46,11 @@
#include <usart.h>
#include <os/os_dev.h>
-#if MYNEWT_VAL(UART_0)
+#if MYNEWT_VAL(UART_0) || MYNEWT_VAL(UART_1)
#include <uart/uart.h>
#include <uart_hal/uart_hal.h>
#include <mcu/hal_uart.h>
-static struct uart_dev hal_uart0;
#endif
#if MYNEWT_VAL(SPI_0)
/* configure the SPI port for arduino external spi */
@@ -84,18 +83,31 @@ struct samd21_i2c_config i2c_config = {
#endif
#if MYNEWT_VAL(UART_0)
-static const struct samd21_uart_config uart_cfgs[] = {
- [0] = {
- .suc_sercom = SERCOM2,
- .suc_mux_setting = USART_RX_3_TX_2_XCK_3,
- .suc_generator_source = GCLK_GENERATOR_0,
- .suc_sample_rate = USART_SAMPLE_RATE_16X_ARITHMETIC,
- .suc_sample_adjustment = USART_SAMPLE_ADJUSTMENT_7_8_9,
- .suc_pad0 = 0,
- .suc_pad1 = 0,
- .suc_pad2 = PINMUX_PA10D_SERCOM2_PAD2,
- .suc_pad3 = PINMUX_PA11D_SERCOM2_PAD3
- }
+static const struct samd21_uart_config uart0_cfg = {
+ .suc_sercom = SERCOM5,
+ .suc_mux_setting = USART_RX_3_TX_2_XCK_3,
+ .suc_generator_source = GCLK_GENERATOR_0,
+ .suc_sample_rate = USART_SAMPLE_RATE_16X_ARITHMETIC,
+ .suc_sample_adjustment = USART_SAMPLE_ADJUSTMENT_7_8_9,
+ .suc_pad0 = PINMUX_UNUSED,
+ .suc_pad1 = PINMUX_UNUSED,
+ .suc_pad2 = PINMUX_PB22D_SERCOM5_PAD2,
+ .suc_pad3 = PINMUX_PB23D_SERCOM5_PAD3,
+};
+#endif
+
+#if MYNEWT_VAL(UART_1)
+static const struct samd21_uart_config uart1_cfg = {
+ .suc_sercom = SERCOM2,
+ .suc_mux_setting = USART_RX_3_TX_2_XCK_3,
+ .suc_generator_source = GCLK_GENERATOR_0,
+ .suc_sample_rate = USART_SAMPLE_RATE_16X_ARITHMETIC,
+ .suc_sample_adjustment = USART_SAMPLE_ADJUSTMENT_7_8_9,
+ .suc_pad0 = PINMUX_UNUSED,
+ .suc_pad1 = PINMUX_UNUSED,
+ .suc_pad2 = PINMUX_PA10D_SERCOM2_PAD2,
+ .suc_pad3 = PINMUX_PA11D_SERCOM2_PAD3
+
};
#endif
@@ -129,7 +141,6 @@ hal_bsp_core_dump(int *area_cnt)
return dump_cfg;
}
-
/**
* Returns the configured priority for the given interrupt. If no priority
* configured, return the priority passed in
@@ -157,8 +168,16 @@ hal_bsp_init(void)
#endif
#if MYNEWT_VAL(UART_0)
- rc = os_dev_create((struct os_dev *) &hal_uart0, "uart0",
- OS_DEV_INIT_PRIMARY, 0, uart_hal_init, (void *)&uart_cfgs[0]);
+ static struct uart_dev hal_uart0;
+ rc = os_dev_create((struct os_dev *)&hal_uart0, "uart0",
OS_DEV_INIT_PRIMARY,
+ 0, uart_hal_init, (void *)&uart0_cfg);
+ SYSINIT_PANIC_ASSERT(rc == 0);
+#endif
+
+#if MYNEWT_VAL(UART_1)
+ static struct uart_dev hal_uart1;
+ rc = os_dev_create((struct os_dev *)&hal_uart1, "uart1",
OS_DEV_INIT_PRIMARY,
+ 0, uart_hal_init, (void *)&uart1_cfg);
SYSINIT_PANIC_ASSERT(rc == 0);
#endif
diff --git a/hw/bsp/arduino_zero/syscfg.yml b/hw/bsp/arduino_zero/syscfg.yml
index 9d6296381..75d5ca0c7 100644
--- a/hw/bsp/arduino_zero/syscfg.yml
+++ b/hw/bsp/arduino_zero/syscfg.yml
@@ -25,6 +25,9 @@ syscfg.defs:
UART_0:
description: 'Whether to enable UART0'
value: 1
+ UART_1:
+ description: 'Whether to enable UART1'
+ value: 0
TIMER_0:
description: 'Arduino zero Timer 0.'
